-
Posts
15,981 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by popeye the sailor
-
hope you and your family had a great Christmas Frank.........hope you have as equally a good new year....may there be good things for you!
-
.......big tease! looks sharp.........love the shots of her interior. you should be proud of what you've accomplished. very nicely done indeed! have a happy new year Mark......and your admiral as well
-
more neat ideas........thanks very much of course Joe.......you can post a picture of your idea......no problem with that sounds great Greg.....you didn't lie though.......you didn't specified how many years, a few were I'd need to figure out how to do the laminant though. you got that right Kevin.........put out a hair brained scheme....and look at how it blooms! I hope it benefits someone down the road. for that to work, the backing {I use plastic wrap} would have to be adhered to the mesh. this way, when the colored glue is dropped in place, it won't run into the next facet. not a bad idea though.......it would need to be pressed til dry.....this would insure a flat mesh panel to be filled see.......I formed a partial plan already thanks Kevin....sounds doable happy new years........ happy first night.......happy flipp'in the year book to the next chapter.....whatever you wish to call it, everyone here at the Wharf and I, want to wish you the very best. stay safe.
-
really neat process Kees...........very well done
- 434 replies
-
- pelikaan
- beamtrawler
-
(and 2 more)
Tagged with:
-
Cutty Sark by NenadM
popeye the sailor replied to NenadM's topic in - Build logs for subjects built 1851 - 1900
one thing to consider.......your going to put anchors in the hull for the screws.....a pretty good idea. but remember that the outer lip of the anchor will protrude on the hull surface. adding them after you drill the holes might cause them to go out of alignment......adding thickness between the hull and stand contact. if you could find small metal ones might be good.......they won't have much of an outer lip. {picture #2}. better yet....if they have to be used { all that you have on hand}, perhaps you could sand them down so the lip is not so prominent. have a great 'first night'- 4,151 replies
-
- cutty sark
- tehnodidakta
-
(and 1 more)
Tagged with:
-
have a good new years Patrick.......you and your family I see your going to hold the suspense over to the new year, on the progress of this fine build. well played Orange
- 1,083 replies
-
nice progress Jesse......side profile looks super
- 1,306 replies
-
- syren
- model shipways
-
(and 1 more)
Tagged with:
-
Bismark is really coming along Kevin.......believe me, the time your spending on her really shows looking great! hope you folks had a good Christmas.........wishes for a super new year!
-
what a great looking ship! the rigging looks fabulous! you really did a super job.......congratz to her finish
- 274 replies
-
- Santa Maria
- Artesania Latina
-
(and 2 more)
Tagged with:
-
the workbench shot shows how small it is awesome work my friend! she's a sweet looking boat!
- 1,083 replies
-
Cutty Sark by NenadM
popeye the sailor replied to NenadM's topic in - Build logs for subjects built 1851 - 1900
well thanks for understanding glad to know that I haven't missed it. have a great time during your time off.- 4,151 replies
-
- cutty sark
- tehnodidakta
-
(and 1 more)
Tagged with:
-
OK.......if we can't put the color directly on the 'glass' .......perhaps we can add a backing. I took another piece of mesh and scanned it. I did a few adjustments as I went along. the first two I did normally......the third is in grayscale .......the fourth one I tried black and white, which didn't come out.......and the fifth one I adjusted the gamma and highlights the normal ones in greyscale and then the one where I made the adjustments I should perhaps paint the mesh copper and then scan it again. I can color in all the facets and the line them up to the panes. once marked off, they can be glued to the back of the windows. of course, I'll have to treat the paper with decal bonder, so the ink doesn't run or go nuts when it glued on. whadya think?
-
a big thanks to you all.........I'm so overwhelmed with all the suggestions. they make me feel that it really wasn't such a fool's errand after all when I showed the admiral, she loved it.......but when I told her what it was doing.......kinda bummed her out. I'm not going to give up the idea just yet.. in all of the suggestions, it still boils down to the fact that I'm working with something that is water soluble.....which means that anything introduced to them will upset the apple cart. I didn't think the window maker was either.......but I guess I found out with this final test. it doesn't say anything about the makeup of the window maker on the bottle.......oh well......we know now I have two more ideas that might work: attempt to bond the mesh onto some clear cello......I have some really thin stuff in my inventory. then I can try to color the cello instead, using the mesh as a guide. take a ride to the local Hobby Lobby and see if they have sheets of stained glass in the doll house dept. they have carpeting, wall paper, and different treatments for the interior and exterior. I just thought of one more idea.........see you folks in a moment
-
....told you about that 'inner critic'........he'll bring you down man! you should be looking up! she's looking great! still can't wait till she's finally off the slip and on her Keel. those darker marks ain't nothing.......once you put the Gundgeons, pintles, and rudder in place.......and then add the depth markers, you'll never see them. Janet's a smart lady
-
seeing you wearing a backpack, suggests that it's a bit of a hike to get up there still looking good though.........makes you think of the archaeologists who stumble onto it in the distant future........perhaps they'll think they found another Stonehenge hope you and your family had a great Christmas........and the new year brings us another of your doiramic tutorials
- 33 replies
-
- trinkstein
- frigate
-
(and 2 more)
Tagged with:
-
Cutty Sark by NenadM
popeye the sailor replied to NenadM's topic in - Build logs for subjects built 1851 - 1900
all the best to you and your family as well Nenad. too bad you can't use the pedestals....folks who plan on using them, tend to make provision for them when they lay the keel. the cradle is your logical choice. putting screws in the model itself?.......I've never had to do it. as others have said, if the cradles are deep enough and contoured to the hull, there is little chance of the model pitching and will give you better support. they do make a stick on felt, as a cushion for the model in the cradle....or just get some thick soft material and glue it on the cradle with rubber cement of sorts. if the inlay your trying to do seems too daunting, perhaps a raised relief may work. doesn't really need to be the star of India.......you could make a pair of anchors {one for each end} and add chain decoration.....or weathered rope. there are many possibilities. you'll figure it out my friend.......you've made it this far in fine shape I hope your Christmas was good......and the new years rings in the continuation of this fine build.- 4,151 replies
-
- cutty sark
- tehnodidakta
-
(and 1 more)
Tagged with:
-
she's such an awesome build Nils. congratz on such fine work! really love the extras you've put in there
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.