-
Posts
25,775 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by mtaylor
-
Beautiful, OC. I was reading (again) and by-perchance the article was about the Pacific theater of operation and the Mosi's. Seems they had a rough time with the humidity and seams opening, warpage, bits falling off, etc. The factory did some serious rework and fixed them so they wouldn't have the problems.
-
No matter how big the chopper might be, it's still way more fragile than a fixed wing aircraft. As I recall, that director took a huge hit in the resulting lawsuits as the insurance companies for the studio and the film wouldn't go any where near it.
-
CH-53 Sikorsky by mtaylor - 1:48 - Revell - FINISHED
mtaylor replied to mtaylor's topic in Non-ship/categorised builds
Just having one of those days... parts flying around, breaking. I think I've ended up with 2 guns that'll work. Once there mounted to the gun racks and installed, I'll do some photos. Also, fuselage is now painted but needs some touch-ups which I'll do once I glue the halves together. To be honest, I don't understand how RGL and others work with stuff so tiny. -
-
HMS VICTORY 1765 by albert - 1/48
mtaylor replied to albert's topic in - Build logs for subjects built 1751 - 1800
Welcome back, Albert. Your laboratory looks great. -
Echo by davec - FINISHED - cross-section
mtaylor replied to davec's topic in - Build logs for subjects built 1751 - 1800
Congratulations, Dave. Life and all that does get in the way doesn't it? Lovely model.- 127 replies
-
Bench Top 5" Disk Sander
mtaylor replied to DocBlake's topic in Modeling tools and Workshop Equipment
Richard, check places like Home Depot and Lowe's for finer sanding disks. Or check the web. -
I hadn't heard that one either, but it's probably true.
-
Revell 1/72 De Havilland D.H. 2
mtaylor replied to SigEp Ziggy's topic in Non-ship/categorised builds
I'm not going to like that post. I hope the scratch build works out. -
I always wished they'd made lathe duplicators for other lathes besides the Sherline. <sigh>
-
CH-53 Sikorsky by mtaylor - 1:48 - Revell - FINISHED
mtaylor replied to mtaylor's topic in Non-ship/categorised builds
The new guns came in and I like these alot. Excellent price and service. Pretty detailed but assembly required. At the top is the link chute for ejecting the links down into the bag we had under the guns. The brass ejected out the bottom of the gun and went into the same back. I'll make an ammo can to hang on the left side of the gun. Later versions had a much larger ammo box sitting on the floor with a system link the fighters in WWII had on the wing guns: metal chute that actually little rollers it in. It even has cover that opened up for loading the ammo belts so they can be open or closed. Now to go sort out the mounting. -
Well... had a -53 named "Shudderin' ShiXXer", with an outhouse that had rotor blades for art. I never figured it out why they vibrated so much. The vibration didn't start until the rotor was spinning so I'm thinking that many choppers either the blades were perfectly tracked or the blades were "mismatched". They were supposed to be pretty close in weight. But, it might have been something else....
-
Hmm... a submarine is just a presunk ship. Right? Denis, get a couple of memory sticks.... label one "main" and one "back up". Then load the stuff on both so that if one dies you'll still have it. I got burned last year. HDD died, and corrupted my backup drive (not all of it but enough to irritate me). I'm now running two back up drives. One stays plugged in and the other gets the back up run on it twice a week. Paranoid I am.
-
CH-53 Sikorsky by mtaylor - 1:48 - Revell - FINISHED
mtaylor replied to mtaylor's topic in Non-ship/categorised builds
You mean they let you out, Denis? You get to see daylight!!! And don't confuse Ray Charles, Stevie Wonder, etc. with Blind Melon Chitlin. (And no... I'm not going to post the video.... I like my job). -
Nice recovery, Lou. Duck tape. We used a lot of it also. But then, a helicopter is just bunch of loose parts flying in formation. I do understand the problem you're having. The catch here is did the parts designer actually use the same model you're building? There's other questions but it might just be quality control. The parts I got (the guns) appear to be 3D printed and a least one sprue was removed before it set.
-
Welcome to MSW, Toddler. I think we've all made at least one of these beasts...
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.