Chuck Posted November 17, 2016 #1 Posted November 17, 2016 Please welcome and thank Wood Project Source for becoming a sponsor of Model Ship World. WPS supplies milled wood sheets and strips along with carving blocks for many hobbies. Their specialty is Alaskan Yellow Cedar Sheets and Carving Blocks. Other species like Yellow Heart, Purple heart, Butternut, Applewood, Dogwood and Mahogany are soon to follow. They also carry the staples for our hobby like Boxwood, Swiss Pear and others. They are just finishing up their new website so please have some patience with them as they continue adding more wood species and products to their online store. They have many more than I listed. I have personally bought from them many times as they are close by and I gotten to know the owner. I have bought some Yellow Cedar and Boxwood from them and will say that I am very happy with the quality of the wood. They have fantastic prices and they are the lowest I have seen for some wood sheets. Please join me in welcoming them as a sponsor of MSW. Visit their site and check them out. I am grateful they decided to become a sponsor and didnt hesitate after I asked them about it. www.woodprojectsource.com EJ_L, Jack12477, grsjax and 25 others 28 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY
Keith_W Posted November 17, 2016 #2 Posted November 17, 2016 Thank you WPS for supporting this site. CaptainSteve, Chuck, Canute and 7 others 10 Regards, Keith 2007 (completed): HMS Bounty - Artesania Latina 2013 (completed): Viking Ship Drakkar - Amati 2014 (completed): HMS Bounty Launch - Model Shipways Current: HMS Royal William - Euromodel
donrobinson Posted November 17, 2016 #3 Posted November 17, 2016 Welcome and Thanks for your support Nirvana, CaptainSteve, mtaylor and 5 others 8 Completed: MS-AVS, Amati Trabaccolo, Dusek ship's boat, AL-Mayflower, Batelina - MarisStella, MarisStella-Trabakul Liburnian Novilara - MarisStella, 17th Century Battle Station, Ragusian Galley-MarisStella Current: Barque Stefano - MarisStella, On Hold: Amati Pegasus
kurtvd19 Posted November 17, 2016 #4 Posted November 17, 2016 Welcome. Thank you for your support. Kurt cobra1951, PeteB, Seventynet and 6 others 9 Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS
Anja Posted November 17, 2016 #5 Posted November 17, 2016 Welcome and thank you for your support. Regards, Anja cobra1951, mtaylor, Canute and 4 others 7 Those we loved but lost are no longer where they were, but are always where we are. In the gallery: Albatros 1840 - Constructo
ccoyle Posted November 17, 2016 #6 Posted November 17, 2016 Your support is appreciated! Canute, EJ_L, mtaylor and 4 others 7 Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, DS Børøysund
AntonyUK Posted November 17, 2016 #7 Posted November 17, 2016 Hello. And thank you for supporting our forum. Regards Antony. mtaylor, Nirvana, EJ_L and 4 others 7 Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section
cobra1951 Posted November 17, 2016 #8 Posted November 17, 2016 Welcome, nice to have your support Canute, mtaylor, Nirvana and 3 others 6 Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
Jim Lad Posted November 17, 2016 #9 Posted November 17, 2016 Thank you, Wood Project Source, for your support of Model Ship World. John Nirvana, EJ_L, Seventynet and 3 others 6
mtaylor Posted November 17, 2016 #10 Posted November 17, 2016 Welcome to MSW and Thanks for your support. Seventynet, Nirvana, Canute and 3 others 6 Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Seventynet Posted November 17, 2016 #11 Posted November 17, 2016 Welcome and thanks for your support! Ian Chuck, EJ_L, cobra1951 and 3 others 6 Builds in progress - Speedwell - by Syren Ship Model Company Builds completed - Hayling Hoy - by David Antscherl - Naval Cutter Cheerful - by Syren Ship Model Company - Cape Cod Catboat - by Bluejacket - Gokstad - by Dusek - Ship's Boat - by Dusek - Brazzera - by MarisStella
PeteB Posted November 18, 2016 #12 Posted November 18, 2016 Hi Guys - Welcome - your support for the site is appreciated as far away as Australia. Hope we can do business in the near future. Cheers Pete cobra1951, EJ_L, Canute and 1 other 4
EJ_L Posted November 18, 2016 #13 Posted November 18, 2016 Indeed, a big welcome and bigger thank you for supporting the site! I am looking forward to seeing your products and hope to do some business in the near future! Chuck, Nirvana, mtaylor and 2 others 5 "A Smooth Sea NEVER made a Skilled Sailor" - John George Hermanson -E.J. Current Builds - Royal Louis - Mamoli Royal Caroline - Panart Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery La Couronne - Corel - Build Log & Gallery Rattlesnake - Model Shipways, HMS Bounty - Constructo Plastic - USS Constitution - Revel (twice), Cutty Sark. Unfinished - Plastic - HMS Victory - Heller, Sea Witch. Member : Nautical Research Guild
Canute Posted November 18, 2016 #14 Posted November 18, 2016 Welcome and thank you for sponsoring MSW. cobra1951, mtaylor, Nirvana and 2 others 5 Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
Erik W Posted November 18, 2016 #15 Posted November 18, 2016 (edited) Welcome. It's good to see another wood supplier. Just out of curiosity, what city/state is Wood Project Source located? Thanks, Erik Edited November 18, 2016 by Erik W mtaylor, Canute, Chuck and 3 others 6 Current build: HM Cutter Cheerful - Scratch Build - 1:48Finished build: 18th Century Longboat - Model Shipways - 1:48
Chuck Posted November 18, 2016 Author #16 Posted November 18, 2016 They are in central New Jersey. They dont have a physical store. He is a member of the a tree commission or conservany or something and gets a lot of his wood from those operations. For example, after Hurricane Sandy he collected a ton of Dogwood, Cherry, and Pear and apple...from fallen trees. Also has dealings with the local tree farmers and orchards. Chuck Canute, Erik W, Ryland Craze and 6 others 9 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY
Captain Poison Posted November 18, 2016 #17 Posted November 18, 2016 For us an invaluable source, therefore, a warm welcome to MSW and many thanks for the support of your company to this great site. cobra1951, Canute, Chuck and 3 others 6 Completed.... Charles W. Morgan,Sea Horse,USS Constitution,Virginia 1819,San Fransisco II, AL HMS Bounty 1:48 L'Herminione 1:96 Spanish Frigate,22 cannons 18th C. 1:35 scale.Scratch-built (Hull only) Cutter Cheefull 1806 1:48 (with modifications) Current Project: Orca (This is a 35" replica of the Orca boat from the movie Jaws)
Angarfather Posted November 18, 2016 #18 Posted November 18, 2016 (edited) Wellcome and thanks for your sponsoring from Germany! Best regards Angarfather Edited November 18, 2016 by Angarfather Chuck, cobra1951, Canute and 3 others 6 on the : Staatenjacht Utrech At last finished: Gianna a Pinco Genovese HMS Agamemnon
mtdoramike Posted November 18, 2016 #19 Posted November 18, 2016 Welcome to the forums and can't wait to take advantage of your products. mike mtaylor, Canute, EJ_L and 1 other 4
Chuck Posted November 22, 2016 Author #20 Posted November 22, 2016 Cherry and Maple sheets and milled strips are now available. I know this because I am building his site for him.....I bartered for wood. He isnt the kind of guy to build his own so I am taking care of it for him and you probably notice the similarity to my own. Anyway....as he gives me new updated wood info and availability I will add them to the WPS website and let you guys know. I hope you give them a try. Chuck Ryland Craze, PeteB, Jack12477 and 4 others 7 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY
WoodProjectSource Posted December 13, 2016 #21 Posted December 13, 2016 (edited) Thank You very much for the well-wishes and welcome. Chuck is showing me around the site tonight. Thanks to each one of you who have placed an order through my website recently. Hope I dont screw things up too badly here. He tells me I cant really break anything on Model Ship World so here it goes. I would like to let all of you know that I just added two more woods to my site which are now available for ordering. I now carry Purpleheart and Mahogany. I will be adding many more as time goes by. So please visit my site often. If you need any wood I have not yet added to my store just send me an email. I would also like to extend a Holiday discount to all of fine people on MSW. Please take 10% off any order from now until the end of December. Use the coupon Code MSWWPS10 at checkout to get your ten percent discount. www.woodprojectsource.com Thank You very much again for the welcome. I look forward to getting to know you guys. If anyone has any questions please dont hesitate to contact me at woodprojectsource@gmail.com Roman Edited December 13, 2016 by WoodProjectSource tlevine, Canute, CaptainSteve and 10 others 13
John Allen Posted December 13, 2016 #22 Posted December 13, 2016 Roman, When will boxwood and alaskan cedar blocks be available. Wish you well on your endeavor! Ryland Craze, mtaylor, Canute and 2 others 5 John Allen Current builds HMS Victory-Mamoli On deck USS Tecumseh, CSS Hunley scratch build, Double hull Polynesian canoe (Holakea) scratch build Finished Waka Taua Maori War Canoe, Armed Launch-Panart, Diligence English Revenue Cutter-Marine Model Co.
WoodProjectSource Posted December 13, 2016 #23 Posted December 13, 2016 I am not sure when I will have a chance to add them to my site. Or more accurately, when Chuck can add them to the site for me. If you don't see something listed, the best thing to do would be to email what you are looking for. Send me an email with the size blocks you are looking for and I will check what I have on the shelf. If I have to cut the carving blocks for you that you need, that wouldn't be a problem either. My email address is woodprojectsource@gmail.com Thanks Roman Canute, PeteB, Nirvana and 3 others 6
Chuck Posted December 13, 2016 Author #24 Posted December 13, 2016 I just finished laser cutting the Yellow cedar he dropped off yesterday. The Alaskan Yellow Cedar is such a wonderful wood to laser cut. The parts are for a second barge I am building which will be made entirely out of the yellow cedar. I hope to have pictures real soon but I am really enjoying working with it. If you are looking for a light golden/yellow wood that is easy to work with I do recommend you give the yellow cedar a try. The top board has some Wipe on Poly on the end. It makes teh color come out nicely. I should have the planking done this weekend so you guys could have a better look at teh stuff as part of a model. Chuck Don9of11, PeteB, Canute and 8 others 11 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY
jml1083 Posted December 14, 2016 #25 Posted December 14, 2016 Hi Roman. Many thanks for supporting our forum. I wish you much success! Nirvana, Ryland Craze, Canute and 2 others 5 Jim L What we ever hope to do with ease, we must learn first to do with diligence. - Samuel Johnson On the Building Ways: Launched: Contracts Signed: Member: The Nautical Research Guild The US Naval Institute
WoodProjectSource Posted December 31, 2016 #26 Posted December 31, 2016 (edited) Thank you for all of the well-wishes and welcome. This is just a reminder that today is the last day to take an additional 10% off any order from now until the end of the year. Use the coupon Code MSWWPS10 at checkout to get your ten percent discount off of our regular low price. You will find our regular prices for A Grade clear boxwood and swiss pear the lowest on the web for sheet sizes and strips in the sizes shown. Happy New Year to all of you Roman Edited December 31, 2016 by WoodProjectSource Ryland Craze, mtaylor, Canute and 1 other 4
WoodProjectSource Posted January 17, 2017 #27 Posted January 17, 2017 (edited) I just wanted to post a quick update that METRIC sizes are now available for Swiss Pear and Boxwood sheets. The sheets are still 3" x 24" long (7.5 x 60.5 cm) and you can select your metric thickness to configure your price. I think you will be very pleased with our product and our prices. We will be updating our other woods with metric sizes very soon. 1mm thick - $11 1.5mm thick -$11 2mm thick -$12 3mm thick -$13 4mm thick -$15 5mm thick -$17 6mm thick -$18 7mm thick -$19 Visit our online store at www.woodprojectsource.com Thank you for your business and if you have any questions please email me at woodprojectsource@gmail.com Roman Edited January 17, 2017 by WoodProjectSource Ryland Craze, Nirvana, GuntherMT and 5 others 8
mtaylor Posted February 15, 2017 #28 Posted February 15, 2017 I got to ask.. Roman.. are you ok? I'm curious but not frantic yet. I ordered last Wednesday, sent a follow up email about a mistake on my order. I've heard nothing back yet except the receipt for my order and from Paypal on the payment being made? Nirvana and Canute 2 Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Nirvana Posted February 15, 2017 #29 Posted February 15, 2017 I haven't made my voice heard, but a very warm welcome to MSW and thank you Roman at WPS for sponsoring us. Nice to see you also carrying metric too. It will certainly help. Looking forward to place an order with you. mtaylor, Brucealanevans and Canute 3 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
WoodProjectSource Posted June 19, 2017 #30 Posted June 19, 2017 I wanted to let everyone know that I just got a fresh batch of Boxwood delivered and it looks like really nice stuff. I also have a bunch of new Cherry and Maple ready for milling. Just in time for your summer modelling projects. Nice looking stuff!!! Thanks to all of you have placed an order for our wood. Dont hesitate to contact me through my website if you have any questions or would like any wood that may not be listed on our site yet. HAPPY MODELLING!!! Visit our site at www.woodprojectsource.com Roman Landlocked123, GuntherMT, mtaylor and 3 others 6
Recommended Posts