michael mott Posted May 13, 2017 #61 Posted May 13, 2017 Thank you Doris for the information about the glues. Michael Piet, FrankWouts, mtaylor and 2 others 5 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Jim Lad Posted May 13, 2017 #62 Posted May 13, 2017 Just found your new building log, Doris. It's a delight to have you back on the forum and building another of your magnificent models. John Piet, mtaylor, DORIS and 3 others 6 Quote
Dziadeczek Posted May 14, 2017 #63 Posted May 14, 2017 Hi Doris, I think Dan had a point, talking about your entry port being a bit too close to the next gun port. On all models (your links, and others) I see this placed rather symmetrically in between two gun ports, so that all rigging to the guns can be securelly fixed to the inner bullwark. Perhaps it is not too late to tweak it? I happen to have a handful of photos of the late Ed Marple's model of his Royal Katherine, exhibited in the Channel Islands Maritime Museum in Oxnard, Southern California (I included one in my earlier post, above). I took them succesively during my numerous visits there, over the years. I don't remember the sources of documentation Mr. Marple used for building his model, only vaguely I seem to recall that he had some drawings from the NMM in London. If you think that those pictures would be helpful for building your model, let me know and I would be happy to send them to you. Regards, Thomas FrankWouts, Piet, Jack12477 and 5 others 8 Quote
shipmodel Posted May 15, 2017 #64 Posted May 15, 2017 Hi Doris - Thanks for pointing me to the models. I think I see how it works. The steps only go up to the level of the entry port, which is offset aft. This is the officers' entry. For the rest, a rope ladder, probably with wooden steps, would have been lowered from the rail and over the closed gunport. In combat it would have been pulled up, of course. I saw this feature in some Van de Velde sketches, but thought that the incomplete ladder was just an artistic shortcut. I should never doubt the master. Dan DORIS, Archi, Jack12477 and 4 others 7 Quote Current build -Khufu solar barge, c. 2,560 BCE, a cross-section model at 1:10 scale Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS Oneida, Swan 42 racing yacht, Queen Anne's Revenge (1710), SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914), James B Colgate (1892), POW bone model (circa 1800) restoration, SS Mayaguez (c.1975) Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas "Take big bites. Moderation is for monks." Robert A. Heinlein
DORIS Posted May 15, 2017 Author #65 Posted May 15, 2017 On 14. 5. 2017 at 4:21 AM, Dziadeczek said: Hi Doris, I think Dan had a point, talking about your entry port being a bit too close to the next gun port. On all models (your links, and others) I see this placed rather symmetrically in between two gun ports, so that all rigging to the guns can be securelly fixed to the inner bullwark. Perhaps it is not too late to tweak it? I happen to have a handful of photos of the late Ed Marple's model of his Royal Katherine, exhibited in the Channel Islands Maritime Museum in Oxnard, Southern California (I included one in my earlier post, above). I took them succesively during my numerous visits there, over the years. I don't remember the sources of documentation Mr. Marple used for building his model, only vaguely I seem to recall that he had some drawings from the NMM in London. If you think that those pictures would be helpful for building your model, let me know and I would be happy to send them to you. Regards, Thomas Dear Thomas, your help and advice are much appreciated, thank you very much. If you have more photos of that model, please share here or send me ( my email is doris.obrucova@seznam.cz). I have thought about the position of entry and tried to simulate on the model, and also my colleagues from the Czech forum helped me and provided additional pictures of RK and other similar ships together with photos of real guns with tackles. The entrance near the gun port also appeared on some other ships including the aforementioned HMS Prince. It seems that even in this position it would be acceptable, cause there is not needed too much space for tackles. http://www.modelforum.cz/viewtopic.php?f=177&p=2004276#p2004276 Of course I am not sure, if my solution is O.K., but I try to make the model according to the painting which is the primary source of information for me. I have noticed that the already existing RK models have many similar elements. I do not know where the modelers had the information from, but when I compared the models with information from professional literature and historical models, I have found some discrepancies that do not correspond to the construction habits of that period. For example the gangway which is done on all models of RK, was used on the real ships after the beginning of the 18th century. But RK is much older and the depicted ship in the painting by Humphrey Vale represents approximately the status after adjustments in 1667-1668. http://www.modelforum.cz/viewtopic.php?f=177&t=110763&start=75#p1995721 The gangway could be probably used much later - rather after rebuilding and renaming the ship to HMS Ramillies in 1706. That's just my deduction. https://en.wikipedia.org/wiki/HMS_Royal_Katherine_(1664) The bowsprit was out of axis on the real RK, while the models have it always in the axis... Well, it is difficult to determine exactly what is and is not right...;-) Best regards Doris BETAQDAVE, fnkershner, mtaylor and 8 others 11 Quote Doris Current build: HMS Royal Katherine 1664 from card
druxey Posted May 15, 2017 #66 Posted May 15, 2017 Ed Marple's models, while beautifully made, may not be entirely historically accurate. I'd rely more on primary sources such as van de Velde. Piet, DORIS, mtaylor and 1 other 4 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
shipmodel Posted May 15, 2017 #67 Posted May 15, 2017 Hi Doris - I found the drawing that I was thinking of. It turned out to be the Royal Katherine herself as drawn by VdV the Elder in 1673 and reproduced in Frank Fox's book "Great Ships - The Battlefleet of King Charles II". As he shows, the half gangway goes up only to the entry port, which is much closer to the forward gunport than I would have expected. This may have been forced on the builder by the forward location of the main channel, which would have been much more difficult to move. Please be assured that none of this nit-picking detracts in any way from the beautiful work that you are doing. Be well Dan Mirabell61, FrankWouts, Hubac's Historian and 11 others 14 Quote Current build -Khufu solar barge, c. 2,560 BCE, a cross-section model at 1:10 scale Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS Oneida, Swan 42 racing yacht, Queen Anne's Revenge (1710), SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914), James B Colgate (1892), POW bone model (circa 1800) restoration, SS Mayaguez (c.1975) Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas "Take big bites. Moderation is for monks." Robert A. Heinlein
druxey Posted May 15, 2017 #68 Posted May 15, 2017 Excellent find, Dan! Piet, FrankWouts, mtaylor and 1 other 4 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
DORIS Posted May 16, 2017 Author #69 Posted May 16, 2017 21 hours ago, shipmodel said: Hi Doris - I found the drawing that I was thinking of. It turned out to be the Royal Katherine herself as drawn by VdV the Elder in 1673 and reproduced in Frank Fox's book "Great Ships - The Battlefleet of King Charles II". As he shows, the half gangway goes up only to the entry port, which is much closer to the forward gunport than I would have expected. This may have been forced on the builder by the forward location of the main channel, which would have been much more difficult to move. Please be assured that none of this nit-picking detracts in any way from the beautiful work that you are doing. Be well Dan Hello Dan, You are right, I understand you. Thank you very much for sharing.When I look at the pictures, it's hard to find the most accurate solution. I'm very interested in the stern gallery in this image - it looks flat compared with the cylindrical shape of galleries on all existing RK models. I plan to make those galleries more flat on my model. Thank you for bringing me these useful materials and ideas. Best regards Doris WackoWolf, archjofo, mtaylor and 11 others 14 Quote Doris Current build: HMS Royal Katherine 1664 from card
Piet Posted May 18, 2017 #70 Posted May 18, 2017 Beautiful work Doris and thanks for sharing your expertise with us. Cheers, FrankWouts, mtaylor, Jack12477 and 1 other 4 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
DORIS Posted May 22, 2017 Author #71 Posted May 22, 2017 Thank you very much, dear Piet. I appreciate your words a lot. The ship is already placed on the pedestal and the gun ports are framed, so now I can begin to cover the surface using "wooden" planks - of course made of foil strips. My feathered assistant almost fell asleep so I stayed alone on my job again ... RdK, BETAQDAVE, hexnut and 39 others 42 Quote Doris Current build: HMS Royal Katherine 1664 from card
druxey Posted May 22, 2017 #72 Posted May 22, 2017 So, your feathered shipwright does all the work? FrankWouts, mtaylor, BETAQDAVE and 3 others 6 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
DORIS Posted May 24, 2017 Author #73 Posted May 24, 2017 Almost. She is very skilful for making varied holes in card by her beak and is able to split up most of the wooden objects - especially tiny blocks in rigging... Sometimes she takes something away and then does not want to return it ... She likes to cling to the ship and then falls asleep. jct, Awas, Piet and 9 others 12 Quote Doris Current build: HMS Royal Katherine 1664 from card
DORIS Posted May 29, 2017 Author #74 Posted May 29, 2017 During the weekend I made wooden finish of the hull using foil stripes. Later, it will be modificated with darker colours and of course I will create treenails and pins in wooden planks as well. marktiedens, popeye the sailor, giampieroricci and 44 others 47 Quote Doris Current build: HMS Royal Katherine 1664 from card
Mirabell61 Posted May 29, 2017 #75 Posted May 29, 2017 Awesome work Doris !! it looks so clean and accurate, also the warm "wooden" planking tone matches good with the black hull portions... Nils Jack12477, mtaylor, Piet and 4 others 7 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
archjofo Posted May 30, 2017 #76 Posted May 30, 2017 Hello Doris,it is amazing how exactly you work. You have developed your technique to the highest level. It is unique, I know nothing comparable.Please do not let us wait too long until the report continues. DORIS, BETAQDAVE, FrankWouts and 3 others 6 Quote Best regards Johann Video: La Créole - Scale 1/48, French corvette of 1827 - naval artillery La Créole - Scale 1/48, French corvette - Construction of long boat La Créole - Scale 1/48, French corvette - Construction of the masts La Créole - Scale 1/48, French corvette - 2019 La Créole - Scale 1/48, French corvette - standing rigging - part 1 La Créole - Scale 1/48, French corvette - standing rigging - part 2 La Créole - Scale 1/48, French corvette - standing rigging - part 3 See also our german forum for Sailing Ship Modeling and History: www.segelschiffsmodellbau.com
popeye the sailor Posted May 30, 2017 #77 Posted May 30, 2017 very nicely done........looks like real wood BETAQDAVE, FrankWouts, DORIS and 2 others 5 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
Piet Posted May 30, 2017 #78 Posted May 30, 2017 Fantastic Doris! Love the color of the "fake" wood, looks rel. Cheers, BETAQDAVE, DORIS, mtaylor and 1 other 4 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
DORIS Posted June 1, 2017 Author #79 Posted June 1, 2017 Dear friends, thank you very much for all your comments and praise. I appreciate your attention and support. That is a great honour for me. Now I have a lot of duties and work around the house and I also spend much time on cars´ care/detailing, but I try to continue with RK whenever possible. How I achieve these accurate and clean results with card and foil planking..... I use ordinary but very sharp scalpel from Tamiya manufacturer and long ruler to cut foil strips. I do not need any special tools. The strips are cut on a hard cardboard pad. In the same way, I cut cardboard tapes and other parts, but I have to repeat cutting more times because the material is thicker - sometimes up to 2mm. These cut strips are always straight. I shape and bow them during sticking to the model using hot air for attaching foils while I stretch them slightly. For bending the cardboard into the curve I use hot steam. I always attach the strips slightly tightened. The "wooden" planking is ready and improved with Tamiya colours (thinned with original thinner and retarder - it is easier to apply on the surface then) to achieve more realistic appearance.Before painting: shipmodel, gieb8688, Jack12477 and 26 others 29 Quote Doris Current build: HMS Royal Katherine 1664 from card
DORIS Posted June 1, 2017 Author #80 Posted June 1, 2017 Current look - after painting and weathering: mtaylor, Anja, Bluto 1790 and 40 others 43 Quote Doris Current build: HMS Royal Katherine 1664 from card
Amalio Posted June 1, 2017 #81 Posted June 1, 2017 It is difficult to believe. Impressive. DORIS, zoly99sask, FrankWouts and 2 others 5 Quote AMALIO
albert Posted June 1, 2017 #82 Posted June 1, 2017 Wonderful work Doris, your model is very very nice. mtaylor, DORIS, Piet and 1 other 4 Quote
Hubac's Historian Posted June 1, 2017 #83 Posted June 1, 2017 Doris - as ever, your talent shines through with a capital T! Is there a wait list, among your friends, to have their likeness modeled and placed somewhere on the ship? That is such a wonderful and personal touch that must make the experience of sharing your models that much more rewarding. If I ever get to know you well enough that you would include me on one of your ships, I hope that you will give my likeness a full hair restoration! mtaylor, BETAQDAVE, DORIS and 2 others 5 Quote We are all works in progress, all of the time.
herask Posted June 1, 2017 #84 Posted June 1, 2017 out of cardboard?! amazing!! Piet, DORIS, FrankWouts and 2 others 5 Quote cheers! Denis In Progress: HMS Pandora 3D modeling (temporarily on hold) Finished Builds: Swan Class HMS Pegasus for Admiralty Models 3D Build German Type VIIC U-Boat 3D model My other 3D work: Artstation
druxey Posted June 1, 2017 #85 Posted June 1, 2017 As usual, you live fully up to our high expectations of you! Lovely work. mtaylor, WackoWolf, Piet and 3 others 6 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
CédricL Posted June 1, 2017 #86 Posted June 1, 2017 Waow ! It's not only a vessel from an era I love, but also a way of modelling I love too; starting nearly "ex nihilo". Respects. It's simply...fantastic !!! DORIS, Piet, mtaylor and 1 other 4 Quote
Hubac's Historian Posted June 1, 2017 #87 Posted June 1, 2017 If you really want to lose your mind - go read through her royal Caroline build! DORIS, FrankWouts, mtaylor and 1 other 4 Quote We are all works in progress, all of the time.
Greg the peg leg sailor Posted June 1, 2017 #88 Posted June 1, 2017 G'day Doris Like everyone, all I can say is bloody marvelous. Can't wait for the next post. Havagooday Greg FrankWouts 1 Quote "Nothing is impossible, it's only what limitations that you put on yourself make it seems impossible! " Current log : The Royal Yacht Royal Caroline 1749 1:32 by Greg Ashwood:...
shipmodel Posted June 2, 2017 #89 Posted June 2, 2017 Doris - What a great artistic eye you have ! Thanks for sharing your techniques and photos. Dan FrankWouts, mtaylor, Piet and 1 other 4 Quote Current build -Khufu solar barge, c. 2,560 BCE, a cross-section model at 1:10 scale Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS Oneida, Swan 42 racing yacht, Queen Anne's Revenge (1710), SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914), James B Colgate (1892), POW bone model (circa 1800) restoration, SS Mayaguez (c.1975) Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas "Take big bites. Moderation is for monks." Robert A. Heinlein
Piet Posted June 5, 2017 #90 Posted June 5, 2017 Beautiful work Doris and thanks for sharing the hows, Cheers, FrankWouts, mtaylor and DORIS 3 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.