Ahoy_there Posted July 5, 2018 #1 Posted July 5, 2018 I've been a member for a few years and followed many builds but not posted any of my own. So far I've built the Constructo USS Albatros and USS Enterprise but wanted to do a scratch built ship. After a lot of wondering which ship to build I decided on HMS Trincomalee. I started the hull and wanted to go and see the real ship in Hartlepool. I was in awe at the size of it. Took loads of pictures for reference and came home oozing with enthusiasm and raring to get on with it. I started this build in May 2017 and pleased to show you all how much I've done so far. I've just spent the last 3 months on and off coppering the hull (it is the most tedious job I've ever done). Finally finished putting just under 2000 tiles on a couple of days ago and because I was impatient to see what it would look like I painted the hull today. Next job is to build the front up Shipyard sid, mtaylor, Stevinne and 28 others 31 Quote
lmagna Posted July 5, 2018 #2 Posted July 5, 2018 Hello Lin Looking forward to watching your progress. So far your construction, painting, and plating look superb to me. mtaylor, Jim Rogers, Ahoy_there and 1 other 4 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey
Morgan Posted July 5, 2018 #3 Posted July 5, 2018 Hi Lin, Lookin good, I’ll tag along, I’m also building the Trincomalee on and off for 10 years now, at 1:64 scale. Someday I’ll get around to posting som pics. Good luck at your rate of progress she will be in the water decades ahead of mine 🙂 If you need any help with plans or photographs let me know I’ve got most things covered, and if I get stuck I’m only 10 minutes walk from the ship herself. Gart lmagna, mtaylor, Ahoy_there and 1 other 4 Quote
druxey Posted July 6, 2018 #4 Posted July 6, 2018 That is an ambitious first scratch build Lin! Looks like you are making an excellent job of her so far. And - ahem - the front is called the bow. Welcome aboard! Ahoy_there, mtaylor and lmagna 3 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
mtaylor Posted July 6, 2018 #5 Posted July 6, 2018 Your first scratch build is certainly daunting but I looks great. Ahoy_there and lmagna 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Ahoy_there Posted July 6, 2018 Author #6 Posted July 6, 2018 19 hours ago, druxey said: That is an ambitious first scratch build Lin! Looks like you are making an excellent job of her so far. And - ahem - the front is called the bow. Welcome aboard! Sorry still on land lubbers terms lol but thanks for all the comments so far mtaylor, Seahawk1313, druxey and 1 other 4 Quote
Seahawk1313 Posted July 7, 2018 #7 Posted July 7, 2018 Very Nice! I'LL follow along.- Hal lmagna, mtaylor and Ahoy_there 3 Quote
Hubac's Historian Posted July 12, 2018 #8 Posted July 12, 2018 An interesting subject and excellent work, so far. I will gladly follow along! mtaylor 1 Quote We are all works in progress, all of the time.
Ahoy_there Posted August 12, 2018 Author #9 Posted August 12, 2018 I've done a bit more to my ship. Working on the Bow trim and whilst things were going off I started on the deck furniture druxey, gieb8688, archjofo and 13 others 16 Quote
Ahoy_there Posted August 12, 2018 Author #10 Posted August 12, 2018 Also made the boarding steps gieb8688, CDW, lmagna and 17 others 20 Quote
Ahoy_there Posted August 29, 2018 Author #11 Posted August 29, 2018 Stuck the trim on the other day. Everything is going slowly at the moment things are so fiddly lol gieb8688, Ondras71, chris watton and 15 others 18 Quote
Ahoy_there Posted August 29, 2018 Author #12 Posted August 29, 2018 However I really need peoples help and suggestions now. I'm trying to do the figurehead. Now...I kinda get the feeling that I'm not doing something correctly 🤔. I've never tried to sculpt a figurehead before so don't know what to do it in (Ideally I'd like to do it in wood as it should be). I can hear you all having a giggle I know I have but any suggestions will be very gratefully received 😊 Oh this is my first attempt 😊 GrandpaPhil, CDW, Bluto 1790 and 12 others 15 Quote
lmagna Posted August 29, 2018 #13 Posted August 29, 2018 Nice looking work Lin. Your work is so clean looking that the model almost looks like a well made plastic kit. Ahoy_there and mtaylor 2 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey
Ahoy_there Posted August 29, 2018 Author #14 Posted August 29, 2018 Thank you 😊 lmagna and mtaylor 2 Quote
druxey Posted August 29, 2018 #15 Posted August 29, 2018 Hints on carving: 1) I like to make a Plasticene model of the carving first (at a larger size). That way I can figure out the problems before actually trying to carve. 2) Keep the carving on the end of a long stick to hold or put in the vise until it is done. For a figure I cut the slot and glue in a 'handle'. If you use white glue, you can free the finished figure using rubbing alcohol. Saves accidentally carving your fingers! 3) Study photos of figureheads and sculptures. One learns a lot by looking at what others have done. Louie da fly, mtaylor, Shipyard sid and 1 other 4 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Louie da fly Posted August 30, 2018 #16 Posted August 30, 2018 (edited) Hi, Lin. The Trincomalee is a very worthwhile model to make and you're doing a very good job on her. I've always wanted to do one of HMS Shannon, which was pretty much a sister ship of the Trincomalee. Just a question - did you have already existing plans to work from or did you draft them yourself? I don't consider myself an expert carver (there are much better ones on this forum alone), but you might like to look at page 7 of my own build log (near the bottom of the page) going from blocks of wood to finished figures. I use pear wood as it has a nice tight grain. I concur with Druxey's points: *Making a plasticiene test piece works very well, particularly with a difficultly shaped figure. I cut a rectangular section block of wood to start with, so I can draw on all four faces if I need to. *I make the block about twice the length of the figure so I have something to hold onto while I'm carving. This is a variant on Druxey's idea but works the same. I cut the piece roughly to shape with a coping saw, then remove unwanted wood with a Stanley knife, then for fine detail move on to a scalpel with a No. 11 blade (you can buy them from some chemists or medical suppliers, along with the proper scalpel handle) - I don't like the "craft knives with a similar blade - I find the blade always seems to come unscrewed at the worst possible moment. I cut away in "layers" - leaving the highest profile bits in place and cutting away deeper and deeper as appropriate to the specific part of the figure. The absence of bloodstains on the figure indicates you're probably already careful with sharp blades, but care is vital. Also use Youtube. There are some very good videos out there which are well worth watching. Have fun with it. Steven Edited August 30, 2018 by Louie da fly Tony Hunt, lmagna and mtaylor 3 Quote It's not really a ship model unless you've bled on it. CURRENT BUILDS Golden City - Ballarat paddlewheeler La Lomellina - Theoretical Reconstruction of a Genoese carrack sunk in 1516 FINISHED Venetian merchant Ship from Basilica of San Marco Australian couta boat RMS Titanic HMVS Cerberus 11th century Byzantine dromon Winchelsea Nef - Late 13th century Mediaeval ship Henry Grace a Dieu - Rebuild of 1:200 model I started in 1967 Mistydeefer - restoration of decor model yacht
Bluto 1790 Posted September 4, 2018 #17 Posted September 4, 2018 Ahoy there Lin! I'll be following your progress with this build. Like you, I visited the ship last year and I was also surprised at the dimensions since this is "just" a frigate. My wife was just going to 'do' Asda while I was on the ship but she decided to come on board for a 'quick look'. She was very surprised at how much she enjoyed her extended visit and was very pleased she had done so. Although the Trincomalee isn't the ship I'm building, I was keen to get some photos of the rigging as I was close to starting the rigging on my ship at the time . . . and I'm nowhere near finishing it yet! (Didn't you make a comment like "everything is going slowly at the moment"!) Right now I'm at the figurehead stage as well and to enable me to work on it, I left a sizeable 'chunk' on the bottom. I made a 'through slot' in it and also made a dummy beakhead so that I could slip it on there while trying to pretend that I can do some carving! The picture below should show the extra bit before it is finally trimmed to its proper size >>> Ahoy_there, Beef Wellington, archjofo and 4 others 7 Quote Jim. I cut it twice . . . . . and it's still too short! HMS Leopard 1790; scratch build 1:80 PoB Cross Section - HMS Leopard 1790 - 1:44
Beef Wellington Posted September 4, 2018 #18 Posted September 4, 2018 (edited) Lovely model Lin and great execution, shame you haven't shared progress up to now! Will certainly be following you from here on, great subject matter. Edited September 4, 2018 by Beef Wellington mtaylor, Shipyard sid, Ahoy_there and 1 other 4 Quote Cheers, Jason "Which it will be ready when it is ready!" In the shipyard: HMS Jason (c.1794: Artois Class 38 gun frigate) Queen Anne Royal Barge (c.1700) Finished: HMS Snake (c.1797: Cruizer Class, ship rigged sloop)
Ahoy_there Posted September 5, 2018 Author #19 Posted September 5, 2018 Louie Da Fly...I haven't got any plans for this build. All the work I've done so far is from photos I've found on the internet and photos of the ship when I went to see it last year 😊 davyboy, mtaylor and lmagna 3 Quote
Ahoy_there Posted September 5, 2018 Author #20 Posted September 5, 2018 So you've all seen my first attempt of the figurehead and we've all had a chuckle at the jelly baby figure (well I have lol). My partner suggested I use a plastic figure and reshape it with filler...I tried it (not going to post pics of it coz it's plastic lol) but I wanted to have a real good go at carving from wood. So....this is my first attempt at carving. I laminated 3 pieces together and drew the profile freehand and away I went. This is the progress so far G.L., druxey, GrandpaPhil and 8 others 11 Quote
mtaylor Posted September 5, 2018 #21 Posted September 5, 2018 You've got a better start than my first attempt, Lin. Go for it!!! Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Louie da fly Posted September 6, 2018 #22 Posted September 6, 2018 (edited) 8 hours ago, Ahoy_there said: Louie Da Fly...I haven't got any plans for this build. All the work I've done so far is from photos I've found on the internet and photos of the ship when I went to see it last year 😊 Well, I'm even more impressed. You've produced a beautiful model without the benefit of formal plans. My hat's off to you. Your figurehead is looking good, too. You've made a good beginning - keep at it. I'm looking forward to seeing how it turns out. Steven Edited September 6, 2018 by Louie da fly Ahoy_there 1 Quote It's not really a ship model unless you've bled on it. CURRENT BUILDS Golden City - Ballarat paddlewheeler La Lomellina - Theoretical Reconstruction of a Genoese carrack sunk in 1516 FINISHED Venetian merchant Ship from Basilica of San Marco Australian couta boat RMS Titanic HMVS Cerberus 11th century Byzantine dromon Winchelsea Nef - Late 13th century Mediaeval ship Henry Grace a Dieu - Rebuild of 1:200 model I started in 1967 Mistydeefer - restoration of decor model yacht
Shipyard sid Posted September 19, 2018 #23 Posted September 19, 2018 Ahoy-there Well there you go. I did not know anybody was building the Trincomalee. The question as been asked many times “Is there a kit for the trincomalee ? “. If there was one I am sure there would be a lot build logs for it. the quality of your work is excellent, So this is a must follow build for me. Like Gart ( Morgan) I live a twenty minute Walk from her, and pass her most days of the week. We have had a severe gale today and here she is swaying in the wind. Best wishes, keep up the good work. DAVID lmagna, Tony Hunt, druxey and 9 others 12 Quote
archjofo Posted September 21, 2018 #24 Posted September 21, 2018 Fantastic work! Ahoy_there and mtaylor 2 Quote Best regards Johann Video: La Créole - Scale 1/48, French corvette of 1827 - naval artillery La Créole - Scale 1/48, French corvette - Construction of long boat La Créole - Scale 1/48, French corvette - Construction of the masts La Créole - Scale 1/48, French corvette - 2019 La Créole - Scale 1/48, French corvette - standing rigging - part 1 La Créole - Scale 1/48, French corvette - standing rigging - part 2 La Créole - Scale 1/48, French corvette - standing rigging - part 3 See also our german forum for Sailing Ship Modeling and History: www.segelschiffsmodellbau.com
Shipyard sid Posted September 24, 2018 #25 Posted September 24, 2018 Ahoy- there ! Have you thought about sculpey for the making the figure head, or are you determined to carve it ? DAVID mtaylor 1 Quote
Ahoy_there Posted October 3, 2018 Author #26 Posted October 3, 2018 On 9/24/2018 at 11:21 AM, Shipyard sid said: Ahoy- there ! Have you thought about sculpey for the making the figure head, or are you determined to carve it ? DAVID Hi David I want to have a real good go at carving it...just to be able to say I tried it and succeeded. Lin lmagna, druxey, Shipyard sid and 1 other 4 Quote
Ahoy_there Posted July 5, 2019 Author #27 Posted July 5, 2019 Hi fellow model makers it's been a very long time since I last posted. I got side tracked by another model because of doing a show at Bovingdon Tank Museum. I was also putting off what I thought was going to be really difficult. In my last post I was just starting to sculpt my figurehead. Well it's 3/4 finished I just have to sculpt the swirly material part and attach it but I thought I'd show you all an up to date pic (plus my distraction) Jonny 007, chris watton, Shipyard sid and 14 others 17 Quote
SHIPSCAT Posted July 5, 2019 #28 Posted July 5, 2019 Hello Lin May I pull up a chair and follow also. Wow nice build you are doing, I have a lot to learn. Nice to see another lady on the forum. Jo. mtaylor, Ahoy_there, Mark P and 1 other 4 Quote Current Build: IL Leudo - Mamoli - 1:34 FD10 Arnanes 701 Billings scale 1:50 "Good conversations are the ones you have with people you do not know"
Ahoy_there Posted July 7, 2019 Author #29 Posted July 7, 2019 Hi Jo Yeah pull that chair up and I'll stick the kettle on and we can have a natter 😂😂. I don't think there's many of us on here. Whats your project then? Shipyard sid, mtaylor and SHIPSCAT 3 Quote
the learner Posted December 6, 2019 #30 Posted December 6, 2019 Don't stop now, you have a good start. Would'nt hurt to get some proper plans. mtaylor 1 Quote Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.