Jump to content

Recommended Posts

Posted

I used lifecolours on my KGV. The colours are nice but nothing that could not have been made up using Grunze or Tamiya which can pretty much be diluted with water. Vajello and I are not friends and numerous people have the same opinion. 

 

Grey, as seen in direct sunlight or heavy cloud changes so much. I think it’s probably it worth getting stuck in the weeds with ‘special colours’. Modulation brings out the angles and details so you’ll need several shades of grey anyways. I agree with the very fine Tamiya rattle can primer. 

 

I think one one can be a bit of a river counter when it comes to correct colours as wartime paints would have varied by several hues.

 

This is the USS Cimaron in 1945, you can see the deck details are just delicious. I imagine a merchant marine ship would be a weathering dream! 

7BC8C8CE-CE0F-4A62-8096-D6B2C7E5F609.jpeg

Greg

 

 

 

 

Posted

I hope you decide to go with the rigging Jack. It would add quite a lot to the model. there are plenty of pictures of Liberties for reference as well as the real thing not all that far from you.

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Posted

Thanks Reed.   At least the Willie L Bennett and Marie Jeanne came with rigging plans/diagrams, this kit has none and all the photos I can find do not show the lines end to end. Still trying to find diagrams.  But I have to wait for a re-supply of EZ line and some other items first.

Posted (edited)

Would this work for you Jack?

image.png.b8f67c692245638ea9eb9defaf79a35f.png

image.png.68d76a936c9738e0831991c6456a453f.png

image.png.10b24e5eb051bed7cab3254ed3a4bec5.png

If that won't work for you, here is the original source and you can blow them up as much as you need to see or make large prints. http://www.themodelshipwright.com/high-resolution-ship-plans/cargo-ships/liberty-ship-arthur-m-huddell/

 

 

 

Edited by lmagna

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Posted

Nice find Lou, thanks!  But talk about intimidating ! :o  Will see what I can do. Or wait for Greg's group build  :D

Posted

As a diversion while I await delivery of additional supplies, I decided to work on this Tamiya LVTP 7A1 amphibious tank (USMC)

 

IMG_6485.JPG.f35ba1de2bfdde61c034dc22efa4701a.JPGIMG_6520.JPG.7875450a556942760b0752a9137cec99.JPGIMG_6525.JPG.2ce4be462b17d1d2087dae7321c1ace0.JPG

Posted (edited)

she looks great Jack!  very nice.......and yes...the rigging would be a nice bit of detail to add :) 

 

nice tank  ;) 

Edited by popeye the sailor

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted

Looks like you have already made quite a bit of progress on the LVTP Jack. Are you going to do the camo like on the box top? Your figure certainly has a strange pose!

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Posted (edited)

I'm going to try and do the camo as winter camo.  I've got too many other tanks in jungle and/or desert camo, but only one in winter camo.

 

Yea, that figure stands atop the tank ! 

Edited by Jack12477
Posted
Posted

either that or about to be run over by the tank!   look'in sweet!

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Posted
12 minutes ago, popeye the sailor said:

either that or about to be run over by the tank!

AH HA! That is the look I was trying to figure out! 

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Posted (edited)

Jack:

regarding rigging ... I found this an invaluable reference when I built my Fra Berlanga refrigerated ship

 

FM 55-17

Chapter 3, Ships Gear and Rigging Procedures

 

https://www.globalsecurity.org/military/library/policy/army/fm/55-17/ch3.htm

 

Edited by Srodbro
Added link

Steve

 

"If they suspect me of intelligence, I am sure it will soon blow over, ha, ha, ha!"

-- Jack Aubrey

 

Builds:

Yankee Hero, Fannie Gorham, We’re Here, Dapper Tom (x3), New Bedford Whaler, US Brig Lawrence (Niagara), Wyoming (half hull), Fra Berlanga (half hull), Gokstad Viking Ship, Kate Cory, Charles Morgan, Gjoa

Posted

Well after pouring over the diagrams and various other photos/drawings I found on the Internet. I decided to keep the rigging simple. After obtaining a roll of EZ-Line ( I thought I was ordering BLACK Fine Rope according to the picture but got Brownish/Red Fine Rope instead) - I chose FINE over HEAVy because the documentation stated that FINE was appropriate for N scale (1:160) or Z scale (1:220) and the model is 1:350, so the FINE would be slightly large for the scale.

 

I cut some pulley blocks from the PE strip for the kit and attached a few to the rigging, didn't paint them because I wanted them to stand out somewhat rather than disappear. The EZ-Line instructions called for using a pin-drop of Thin CA to attach the EZ-Line; well the CA reacted with the rubber in the EZ-Line thread and the fumes gave me a wicked sinus issue.  Switched over to Gator Grip for the rest of the installation.

 

Did some "weathering" with chalk dust and some dry brushing with paint over the hull, deck, funnel.

 

Here's the photos of the finished model

 

IMG_6532.JPG.e946e6783175166a9d01eee68679223b.JPGIMG_6533.JPG.22250973b77e2b2d7e38dacebe4c75ab.JPGIMG_6534.JPG.70abd0693ac4f9b0373957249bb7aa54.JPGIMG_6535.JPG.ce3054d9c9844f267224dfef0e7ab46b.JPGIMG_6529.JPG.f08fca5428a1bb8f294ad40b4547d8b2.JPGIMG_6530.JPG.1e6e8756e513b596ef5b857444fac208.JPGIMG_6531.JPG.bd9db027c1884c6e27ec36b4d86b7b21.JPGIMG_6540.JPG.e5f12cb5e3a1b616d000d26c104d002b.JPGIMG_6541.JPG.6ffa636770731c8d5d724d0a68c68f1c.JPGIMG_6536.JPG.bb14ad51fb876c79bd3257c5636ca633.JPGIMG_6537.JPG.a4feffe393e7d029bb4966418fb0cb92.JPG

IMG_6543.JPG

Posted

Glad to see that you added the rigging Jack. It made the ship look much better, so did the weathering.

 

Thanks for letting us come along for the build.

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Posted
On 2/6/2019 at 1:39 AM, RGL said:

Ok, what’s next?

Well, first I need to finish this diversionary project I started while awaiting a re-supply. Have to finish the camo paint, weather it, and some extra detailing, then on to ????????   Maybe another destroyer, or destroyer escort, maybe even the sister Liberty Ship O'Brien ????  Not sure yet ?

 

Pictures of the "diversionary project" (USMC LVTP 7A1 in winter camo)

 

IMG_6552.JPG.391f7f07b2f50ad1aa000b3eb055be19.JPGIMG_6554.JPG.4fcb642ca06c7b61cec47f2516235cc7.JPG

Posted

You need to put a plow on the front and put it to work Jack!

 

Looking pretty nice.

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Posted

jeeze........your doing spectacular work on both fronts!  :)   great Job on the John Brown....the rigging really finishes hr off nicely.............and suprb camo on the tank.   great job my friend......:cheers:👍

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...