scrubbyj427 Posted February 17, 2023 Author Share #361 Posted February 17, 2023 Thank you guys! Appreciate all the comments. I’ll be back in a little over a week and hopefully have some more updates on chapter 9 and the upper deck planking. JJ FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
scrubbyj427 Posted March 2, 2023 Author Share #362 Posted March 2, 2023 Small update… There’s always more guns to build! So I realized my lumber stash is lacking significantly so I wrote Joe at modelers sawmill and ordered some sheets of AYC so I can cut those curved margin planks and the forward curved planks for the bow, in the meantime I thought I would start on the aft deck and I got this far before I realized I was also out of 1/4” planking billets! Sent Joe another email and ordered plenty of those… at least there are always more guns to build to keep me busy while my AYC finds its way here. JJ Matt D, Beckmann, FrankWouts and 10 others 12 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Chuck Posted March 3, 2023 Share #363 Posted March 3, 2023 It really does look good. I hope the new planking billets will match in color close enough. You should cut some strips and then apply some finish as a check before you glue any down. You could easily remove those few planks on the qdeck if they dont match and just use the same new stuff. scrubbyj427, dvm27 and FrankWouts 3 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
scrubbyj427 Posted March 3, 2023 Author Share #364 Posted March 3, 2023 20 minutes ago, Chuck said: It really does look good. I hope the new planking billets will match in color close enough. You should cut some strips and then apply some finish as a check before you glue any down. You could easily remove those few planks on the qdeck if they dont match and just use the same new stuff. Thank you Chuck. the thought crossed my mind. I told Joe to send the lightest stuff possible and I sent photos of my 5/16” stock (from syren) with a white background to give perspective. Fingers crossed, the margins and three planks took oh around 8 hours. If the wood is too light I can darken it but if it’s already too dark then I’m ripping planks off! FrankWouts, glbarlow and Chuck 3 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
glbarlow Posted March 3, 2023 Share #365 Posted March 3, 2023 Looks crisp and nice. Good idea to check colors of billets. There can be a wide variance, I spent a lot of time matching colors. But yikes I’m out of matching ones. scrubbyj427 and FrankWouts 2 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose Link to comment Share on other sites More sharing options...
scrubbyj427 Posted March 3, 2023 Author Share #366 Posted March 3, 2023 1 hour ago, glbarlow said: Looks crisp and nice. Good idea to check colors of billets. There can be a wide variance, I spent a lot of time matching colors. But yikes I’m out of matching ones. Thanks Glenn. I’m kinda stuck at this point because it also matches the gun deck so I guess I may be buying a lot of billets to get it right!😬 FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
glbarlow Posted March 3, 2023 Share #367 Posted March 3, 2023 1 hour ago, scrubbyj427 said: buying a lot of billets to get it right!😬 I completely get it. FrankWouts and scrubbyj427 2 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose Link to comment Share on other sites More sharing options...
scrubbyj427 Posted March 11, 2023 Author Share #368 Posted March 11, 2023 Small update. So I received my lumber supply from @Joe V at modelers sawmill, wonderful job on milling and sending me just what I needed, thank you Joe! i was able to finish the port QD as well as the bow planking. The Bow was quite a project and required a lot of patience as each plank is a mini project of its own but it was well worth the effort. One thing I noticed after applying WOP, depending on the grain direction, the plank appears to change its tone at different light angles as you can see below, some of my planks are obviously facing different directions but it’s not nearly as dramatic to the eye and not even possible to tell until poly is added… also note I just added WOP to the stbd side so it’s even more dramatic but it will settle down in 24hrs. But I’m happy with the results overall and the quality of the wood. I will begin planking the center of the foredeck today and hopefully finish in a few days. Oh I finally got a new slitting blade from Byrnes model machines, can you believe I’ve been cutting all my wood with a 36 tooth and sanding both sides smooth for all this time! Lol. Excited to bolt this thing on. JJ Edwardkenway, mtbediz, Chuck and 14 others 16 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Edwardkenway Posted March 11, 2023 Share #369 Posted March 11, 2023 Looks great! Very nice planking Indeed. Another Winnie to aspire to. FrankWouts 1 Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED Link to comment Share on other sites More sharing options...
glbarlow Posted March 12, 2023 Share #370 Posted March 12, 2023 Great scarf joints, send me some🤣 FrankWouts and Edwardkenway 1 1 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose Link to comment Share on other sites More sharing options...
Steve20 Posted March 12, 2023 Share #371 Posted March 12, 2023 Thats an incredible build and it looks really, really good. FrankWouts 1 Link to comment Share on other sites More sharing options...
scrubbyj427 Posted March 13, 2023 Author Share #372 Posted March 13, 2023 On 3/11/2023 at 6:41 PM, Edwardkenway said: Looks great! Very nice planking Indeed. Another Winnie to aspire to. Thank you Edward. On 3/11/2023 at 9:02 PM, glbarlow said: Great scarf joints, send me some🤣 Sure thing Glenn, how many do you want? I’ve got lots of gently used ones that may work for you! lol 21 hours ago, Steve20 said: Thats an incredible build and it looks really, really good. Thank you Steve. glbarlow and FrankWouts 2 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
jfhealey Posted March 13, 2023 Share #373 Posted March 13, 2023 Super planking/scarf joints JJ. FrankWouts 1 Link to comment Share on other sites More sharing options...
JpR62 Posted March 13, 2023 Share #374 Posted March 13, 2023 These scarf joints are absolutely perfect ! Excellent work 👍 FrankWouts 1 Jean-Paul 'You are not carving a bear with a chain saw here folks', Chuck Passaro, ´Queen Anne Style Barge´ manual of instructions Current builds : Medway Longboat 1742 - Syren Ship Model - 1:24 HM Cutter Cheerful 1806 - Syren Ship Model Company - 1:48 Santa Maria boat 1492 - Korabel (Ukraine) - 1:24 Captain John Smith's shallop - Korabel (Ukraine) - 1:32 Finished build : Queen Anne Barge - Syren Ship Model - 1:24 Armed Virginia Sloop - Model Shipways - 1:48 Batelina - MarisStella - 1:10 Next on list : HMS Winchelsea 1764 - Syren Ship Model - 1:48 Link to comment Share on other sites More sharing options...
James G Posted March 13, 2023 Share #375 Posted March 13, 2023 As everyone has already said JJ, it looks so beautiful! I just wanted to let you know that you’re going to love your Byrnes slitting blade.I purchased these a while ago and am amazed at how they cut. You’ll wonder how you ever got by before! FrankWouts 1 Jim Current Build: HMS Winchelsea, Model Shipways Mayflower Completed Builds: NRG Half Hull Project Model Shipways 18th Century Armed Longboat Dumas 1954 Chris Craft 36' Commander Dumas 1940 Chris Craft 19' Barrel Back Link to comment Share on other sites More sharing options...
Rustyj Posted March 13, 2023 Share #376 Posted March 13, 2023 Very well done! So clean and crisp! FrankWouts 1 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
rlb Posted March 13, 2023 Share #377 Posted March 13, 2023 Your Winnie looks fabulous, JJ!! Ron FrankWouts 1 Building: US Brig Oneida (1809) HMS Euryalus (1803) Completed: John Alden Sloop Link to comment Share on other sites More sharing options...
scrubbyj427 Posted March 16, 2023 Author Share #378 Posted March 16, 2023 (edited) On 3/13/2023 at 4:38 AM, jfhealey said: Super planking/scarf joints JJ. Thank you Fred, practice makes perfect…. Or lots of imperfect leftovers… On 3/13/2023 at 5:33 AM, JpR62 said: These scarf joints are absolutely perfect ! Excellent work 👍 Thank you JP! On 3/13/2023 at 7:07 AM, James G said: As everyone has already said JJ, it looks so beautiful! I just wanted to let you know that you’re going to love your Byrnes slitting blade.I purchased these a while ago and am amazed at how they cut. You’ll wonder how you ever got by before! Thanks Jim, I absolutely went crazy with it and just started ripping planks that I didn’t even need, just because it was fun and they looked so good. I can’t believe I didn’t get this sooner. I’m going to order a couple more so I never run out of them! Ha! On 3/13/2023 at 3:26 PM, rlb said: Your Winnie looks fabulous, JJ!! Ron Thank you Ron, your Euryalus is quite the build and is motivating me to jump into full POF. Edited March 16, 2023 by scrubbyj427 Sp James G and FrankWouts 2 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
scrubbyj427 Posted March 22, 2023 Author Share #379 Posted March 22, 2023 (edited) Completed chapter 9 a few days ago and already onto 10. Spent a lot of time on fitting things, lots or test/sand/repeat, until it fits right . The railing was kinda tricky due to the fact that my bow is slightly out of shape from not checking/correcting this very early on but I made it work and am happy with the results. I spent a lot of time of the cat heads and trying my best to make them look identical, I even laid a batten down across them to make sure they were at the same angle, this being off would drive me nuts. the spanshackles were made from round copper wire and soldered, filed and then filed/sanded to look flat. Took a lot of care to make sure the belfry fit right, so I actually took adhesive backed sandpaper and stuck it to the part of the deck at which it would be glued down and gently sanded the deck camber into the bottom, I think it worked well. I pinned it down, it’s a certainty I will probably knock it off otherwise. Thanks for checking in. JJ ps. Please excuse my filthy model, it is an absolute sanding dust ball! Edited March 22, 2023 by scrubbyj427 rlb, FrankWouts, JpR62 and 11 others 11 3 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Matt D Posted March 22, 2023 Share #380 Posted March 22, 2023 (edited) That looks great, JJ! That was a good idea, using a batten to check the catheads. They look perfectly aligned to me. Edited March 22, 2023 by Matt D FrankWouts 1 Current Build: HMS Winchelsea 1:48 (Group Project) Completed Builds: Virginia 1819 Artesania Latina - 1:41 Link to comment Share on other sites More sharing options...
jfhealey Posted March 22, 2023 Share #381 Posted March 22, 2023 You are doing a wonderful job JJ. I should think you must be very proud of what you have achieved. A fantastic representation of the Winnie. All the best Fred FrankWouts 1 Link to comment Share on other sites More sharing options...
Waldemar Posted March 22, 2023 Share #382 Posted March 22, 2023 Well, I don't get much opportunity to look at other threads, but here I can see that I'm missing out on a lot by doing so. What strikes me about your model is the attention to detail, precision and exceptional neatness of execution, but without that undesirable effect of excessive, artificial sterility. I wish "my" modellers here would also build my reconstructed ship to your standard, but I know they too have a deadline... FrankWouts 1 Link to comment Share on other sites More sharing options...
Rustyj Posted March 22, 2023 Share #383 Posted March 22, 2023 Dust or not, she is looking fantastic. FrankWouts 1 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
glbarlow Posted March 22, 2023 Share #384 Posted March 22, 2023 That’s a really fine looking model. Excellent tricks for mounting and making things fit correctly, and for taking the time for small details. Thanks for sharing them. Your forecastle planking will be my reference if I ever get there. Well done! FrankWouts 1 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose Link to comment Share on other sites More sharing options...
scrubbyj427 Posted March 23, 2023 Author Share #385 Posted March 23, 2023 On 3/21/2023 at 9:55 PM, Matt D said: That looks great, JJ! That was a good idea, using a batten to check the catheads. They look perfectly aligned to me. Thank you Matt, slightly scientific but still relying on the old eye test. On 3/22/2023 at 5:49 AM, jfhealey said: You are doing a wonderful job JJ. I should think you must be very proud of what you have achieved. A fantastic representation of the Winnie. All the best Fred Thank you Fred, very much looking forward to you resuming work on your Winnie, your cheerful looks very good. On 3/22/2023 at 6:40 AM, Waldemar said: Well, I don't get much opportunity to look at other threads, but here I can see that I'm missing out on a lot by doing so. What strikes me about your model is the attention to detail, precision and exceptional neatness of execution, but without that undesirable effect of excessive, artificial sterility. I wish "my" modellers here would also build my reconstructed ship to your standard, but I know they too have a deadline... Thank you Waldemar, much appreciated. On 3/22/2023 at 8:52 AM, Rustyj said: Dust or not, she is looking fantastic. Thank you Rusty, my cleaning frequency has slightly regressed to bi-weekly lol. On 3/22/2023 at 10:27 AM, glbarlow said: That’s a really fine looking model. Excellent tricks for mounting and making things fit correctly, and for taking the time for small details. Thanks for sharing them. Your forecastle planking will be my reference if I ever get there. Well done! Thank you Glenn, you’ll be there sooner than you think by the looks of it. I’ve been using your build as a “you should go back and re-do that part” or “why didn’t I do it that way” kind of guide. 😆 glbarlow and Matt D 2 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
James G Posted March 24, 2023 Share #386 Posted March 24, 2023 Amazing JJ! Your Winnie is an inspiration. FrankWouts 1 Jim Current Build: HMS Winchelsea, Model Shipways Mayflower Completed Builds: NRG Half Hull Project Model Shipways 18th Century Armed Longboat Dumas 1954 Chris Craft 36' Commander Dumas 1940 Chris Craft 19' Barrel Back Link to comment Share on other sites More sharing options...
scrubbyj427 Posted March 29, 2023 Author Share #387 Posted March 29, 2023 On 3/24/2023 at 8:36 AM, James G said: Amazing JJ! Your Winnie is an inspiration. Thank you Jim. Excited to see you start laying planks down. FrankWouts and James G 2 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
scrubbyj427 Posted April 2, 2023 Author Share #388 Posted April 2, 2023 (edited) Concluded chapter 10, no issues, smooth sailing. The wheel may have been the trickiest part as it’s so small and fragile. Back into full swing of gun production now as I wait for chapters 11&12 to arrive. Hope to have the waist filled in this week and start slowly adding the 6 pounders as I progress on chapter 11. Thanks for checking in. JJ Edited April 2, 2023 by scrubbyj427 Edwardkenway, FrankWouts, rlb and 13 others 13 3 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Matt D Posted April 3, 2023 Share #389 Posted April 3, 2023 Beautiful work, JJ! Your photos are really well done, too. The close ups really show off the detail of your work. Your wheel and binnacle look so good! I also really like the mating of the cap rails to the fancy moldings in the bottom photo of your post. scrubbyj427 and FrankWouts 1 1 Current Build: HMS Winchelsea 1:48 (Group Project) Completed Builds: Virginia 1819 Artesania Latina - 1:41 Link to comment Share on other sites More sharing options...
jfhealey Posted April 3, 2023 Share #390 Posted April 3, 2023 I entirely agree with Matt. Super work. Fred FrankWouts and scrubbyj427 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts