Beckmann Posted January 25, 2021 Author Share #211 Posted January 25, 2021 (edited) Hello everybody, I started chapter 4 now, and made 2 of those fantastic gun's at the beginning. I think the red carriage suits better, but the natural carriage is beautiful as well. Next I planked the lower deck platforms and glued the deck beams an deck sheats in position. All turned out well, no problems so far. This broadside will look wonderful, once completed!! Matthias Edited January 25, 2021 by Beckmann egkb, Ron Burns, Gregory and 15 others 18 Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted January 25, 2021 Share #212 Posted January 25, 2021 12 hours ago, Beckmann said: Hello everybody, I started chapter 4 now, and made 2 of those fantastic gun's at the beginning. I think the red carriage suits better, but the natural carriage is beautiful as well. Next I planked the lower deck platforms and glued the deck beams an deck sheats in position. All turned out well, no problems so far. This broadside will look wonderful, once completed!! Matthias Stunning Mathias. FrankWouts and Saburo 2 Link to comment Share on other sites More sharing options...
Rustyj Posted January 26, 2021 Share #213 Posted January 26, 2021 4 hours ago, Vladimir_Wairoa said: Stunning Mathias. I can't say it any better than that! FrankWouts 1 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
Beckmann Posted February 2, 2021 Author Share #214 Posted February 2, 2021 I made the inboard planking of the bulwarks, and of course forgot to insert the little shells in the second layer, I inserted them in the first layer. So I have do drill the holes in the right place and somehow create the notch between them. After painting everything, I will continue with the paneled captains cabin. Matthias egkb, scrubbyj427, JpR62 and 6 others 9 Link to comment Share on other sites More sharing options...
AnobiumPunctatum Posted February 2, 2021 Share #215 Posted February 2, 2021 Your model is looking really beautyful. FrankWouts 1 Regards Christian Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36 On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777 Paused: HMS Triton, 1771 - 1/48 "Have no fear of perfection - you'll never reach it." Salvador Dali Link to comment Share on other sites More sharing options...
Stuntflyer Posted February 2, 2021 Share #216 Posted February 2, 2021 Matthias, Your model is looking really nice! Just a reminder to end the plank here. Same idea for the one at the QD. Mike Saburo and FrankWouts 2 Current build - Sloop Speedwell 1752 (POF) Completed builds - 18 Century Longboat (POB) , HM Cutter Cheerful 1806 (POB), HMS Winchelsea 1764 (POB) Member: Ship Model Society of New Jersey Link to comment Share on other sites More sharing options...
Beckmann Posted February 2, 2021 Author Share #217 Posted February 2, 2021 Thank you Mike, I corrected that. Stuntflyer and FrankWouts 2 Link to comment Share on other sites More sharing options...
Beckmann Posted February 9, 2021 Author Share #218 Posted February 9, 2021 (edited) The next thing for me to do is the panels and flooring of the captains cabin. I wanted to use my ivory for the panels and started with the starbord panel. I made a base from a thin veneer and cut out door and gunport in the right position. Then I glued small strips of veneer onto it, for the placement of frames and panels. The ivory parts were cut and profiled on the saw and afterward sanded an glued on the base. Here you see the result. My material will be enough for the captains cabin, but not for the rooms infront of the cabin. I plan to make that with wooden panels like this one here: One thing I still have to add, before gluing the starbord panel in position is the door to the Quartergalerie. I am thinking of a sliding door like this one: After that, I will make the checkerbord flooring, using the material of the panels and some ebony. I started the preparation on this one: Here you see the strips glued together and sandet roughly, next they will be cut apart and glued on a veneer-basebord as well and then sanded and polished. Matthias Edited February 9, 2021 by Beckmann Jorge Diaz O, JpR62, Saburo and 10 others 13 Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted February 9, 2021 Share #219 Posted February 9, 2021 8 hours ago, Beckmann said: The next thing for me to do is the panels and flooring of the captains cabin. I wanted to use my ivory for the panels and started with the starbord panel. I made a base from a thin veneer and cut out door and gunport in the right position. Then I glued small strips of veneer onto it, for the placement of frames and panels. The ivory parts were cut and profiled on the saw and afterward sanded an glued on the base. Here you see the result. My material will be enough for the captains cabin, but not for the rooms infront of the cabin. I plan to make that with wooden panels like this one here: One thing I still have to add, before gluing the starbord panel in position is the door to the Quartergalerie. I am thinking of a sliding door like this one: After that, I will make the checkerbord flooring, using the material of the panels and some ebony. I started the preparation on this one: Here you see the strips glued together and sandet roughly, next they will be cut apart and glued on a veneer-basebord as well and then sanded and polished. Matthias wow your panels look fabulous Mathias. I will try to mimic same idea though.V. Link to comment Share on other sites More sharing options...
Beckmann Posted February 9, 2021 Author Share #220 Posted February 9, 2021 I glued the panel to the model now and added the sliding door. Next will bet the port side panel. Jack H, Jorge Diaz O, dvm27 and 19 others 21 1 Link to comment Share on other sites More sharing options...
Beckmann Posted February 23, 2021 Author Share #221 Posted February 23, 2021 (edited) I Edited February 23, 2021 by Beckmann FrankWouts 1 Link to comment Share on other sites More sharing options...
Beckmann Posted February 23, 2021 Author Share #222 Posted February 23, 2021 Hello everybody, I made the checker floor for the captains cabin. I wanted it like on the pictures on the captains cabins: First thing was to provide the stripes and cut them without breaking them. Next step was to stick them upside down on a tape. after that was done, a veneer template, wich had the size of the later flooring was glued to it upside down. Afterwards the edges were cut and sanded in shape and the surface was polished. Her you see the flooring on the model: Matthias Rustyj, Ron Burns, Jorge Diaz O and 21 others 24 Link to comment Share on other sites More sharing options...
jfhealey Posted February 23, 2021 Share #223 Posted February 23, 2021 That is looking superb Matthias. Really well done. Fred FrankWouts 1 Link to comment Share on other sites More sharing options...
Chuck Posted February 23, 2021 Share #224 Posted February 23, 2021 Nicely done. FrankWouts 1 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
Rustyj Posted February 24, 2021 Share #225 Posted February 24, 2021 That looks really good Matthias! FrankWouts 1 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
scrubbyj427 Posted February 25, 2021 Share #226 Posted February 25, 2021 I wasn’t going to paint my panels white but that really pushed me in the other direction after seeing yours. Wow! JJ FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Beckmann Posted March 8, 2021 Author Share #227 Posted March 8, 2021 (edited) Hello Everybody, I finished the captains cabin rear gallery with the installation of the rudder trunk and the benches. For the small panels between the windows, I made small ebony decoration strips as framing. First picture is the rudder trunk befor installation: Here you can see the Captain Sir C. Passaro is giving order for the next work to do The paneled front of the bench were glued against a curved template, to follow the curved edge of the flooring. And the finished arrangements: A little talk after everything is done. Matthias Edited March 8, 2021 by Beckmann FrankWouts, Vladimir_Wairoa, rafine and 24 others 27 Link to comment Share on other sites More sharing options...
captain_hook Posted March 8, 2021 Share #228 Posted March 8, 2021 Very beautiful finish! FrankWouts 1 Current Build: HM Brig Badger 1/48 from Caldercraft plans Le Coureur 1/48 by CAF — Completed Build: Armed Virginia Sloop 1/48 by Model Shipways / Gallery HM Cutter Sherbourne 1/64 by Caldercraft / Gallery Link to comment Share on other sites More sharing options...
scrubbyj427 Posted March 8, 2021 Share #229 Posted March 8, 2021 That looks excellent!! Wow! FrankWouts 1 Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship Link to comment Share on other sites More sharing options...
Chuck Posted March 8, 2021 Share #230 Posted March 8, 2021 Excellent work...that just shows how you can make your model very unique. Well done. Chuck Vladimir_Wairoa and FrankWouts 2 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted March 9, 2021 Share #231 Posted March 9, 2021 On 3/8/2021 at 9:56 AM, Beckmann said: Hello Everybody, I finished the captains cabin rear gallery with the installation of the rudder trunk and the benches. For the small panels between the windows, I made small ebony decoration strips as framing. First picture is the rudder trunk befor installation: Here you can see the Captain Sir C. Passaro is giving order for the next work to do The paneled front of the bench were glued against a curved template, to follow the curved edge of the flooring. And the finished arrangements: A little talk after everything is done. Matthias congratulations. beautiful. FrankWouts 1 Link to comment Share on other sites More sharing options...
dvm27 Posted March 10, 2021 Share #232 Posted March 10, 2021 Captain Sir C. Passaro's figure is more anatomically correct than that skinny stick figure you substituted. No wonder he gave it a thumbs up. Love the way your treatment of the cabin makes your model unique. scrubbyj427, FrankWouts and Chuck 3 GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752 Link to comment Share on other sites More sharing options...
AnobiumPunctatum Posted March 10, 2021 Share #233 Posted March 10, 2021 Really nice progress. The color of the ivory looks fantastic. FrankWouts 1 Regards Christian Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36 On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777 Paused: HMS Triton, 1771 - 1/48 "Have no fear of perfection - you'll never reach it." Salvador Dali Link to comment Share on other sites More sharing options...
Beckmann Posted April 26, 2021 Author Share #234 Posted April 26, 2021 Hi all, I added the coamings and made the planking of the deck. That was a nice work to do. Rustyj, dvm27, Ron Burns and 14 others 17 Link to comment Share on other sites More sharing options...
Chuck Posted April 26, 2021 Share #235 Posted April 26, 2021 That is quite nice. Well done. FrankWouts 1 Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
Rustyj Posted April 26, 2021 Share #236 Posted April 26, 2021 Beautiful work! FrankWouts 1 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
Beckmann Posted May 3, 2021 Author Share #237 Posted May 3, 2021 Thank you all for the likes and comments, I proceeded with the rudder, wich was so incredibly well designed by Chuck. Just following the step by step instructions She loves doing the fiddly things and her eyes are better than mine anyway... Not much left to do, and I can turn the hull back over and mount the rudder in its place. Matthias Edwardkenway, Jorge Diaz O, Jack H and 14 others 17 Link to comment Share on other sites More sharing options...
Beckmann Posted May 5, 2021 Author Share #238 Posted May 5, 2021 (edited) Here we go with the rudder mounted at the model. Matthias Edited May 5, 2021 by Beckmann dvm27, JpR62, egkb and 18 others 21 Link to comment Share on other sites More sharing options...
Rustyj Posted May 5, 2021 Share #239 Posted May 5, 2021 Great job! egkb and FrankWouts 2 Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
Beckmann Posted May 6, 2021 Author Share #240 Posted May 6, 2021 The grating is about 1,6 mm or 1/16" thick now. Is that how you do it Chuck? coxswain, Saburo, Matt D and 2 others 5 Link to comment Share on other sites More sharing options...
Recommended Posts