michael mott Posted April 17, 2013 Share #331 Posted April 17, 2013 Exquisite Dan!! are those bolts properly threaded? Michael Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
newbuilder101 Posted April 17, 2013 Share #332 Posted April 17, 2013 Every time I stop by your build I'm amazed - such precision on such a small piece! Absolutely spectacular! The capstan plans for my San Felipe show the bars placed on the deck around the capstan...I'm guessing to keep them out of the way until needed. Was this common practice on the British ships as well, or just something unique to Spanish ships or maybe just the manufacturer of the plans? Quote Sherry Every goodbye is the birth of a memory... Current Build: San Felipe Finished Builds: Mayflower Build Log Gallery: Mayflower Link to comment Share on other sites More sharing options...
BANYAN Posted April 18, 2013 Share #333 Posted April 18, 2013 Now that is one very nice finish Danny; thanks for the feedback. cheers Pat Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64) Link to comment Share on other sites More sharing options...
lagrayjr Posted April 18, 2013 Share #334 Posted April 18, 2013 Can you link the upper deck and lower deck capstans together for heavy lifting? Laman Quote Link to comment Share on other sites More sharing options...
Dan Vadas Posted April 21, 2013 Author Share #335 Posted April 21, 2013 Thanks John, Druxey, lamarvalley, TJ, Michael, Sherry, Pat and Laman - much appreciated . where are the retaining pins for the capstan bars? I'll leave those for Remco . are those bolts properly threaded? Of course they are . Just kidding . The capstan plans for my San Felipe show the bars placed on the deck around the capstan...I'm guessing to keep them out of the way until needed. Was this common practice on the British ships as well, or just something unique to Spanish ships or maybe just the manufacturer of the plans? Common to all Sherry - They take up a LOT of space when in use. Can you link the upper deck and lower deck capstans together for heavy lifting? Yes, they are linked for that purpose. Danny Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
Ponto Posted April 21, 2013 Share #336 Posted April 21, 2013 Very, very impressive!!!!!.....and always look forward to future updates. JP Quote Built & De-Commissioned: HMS Endeavour (Corel), HMS Unicorn (Corel), Abandoned: HMS Bounty (AL) Completed : Wappen Von Hamburg (Corel), Le Renommee (Euromodel)... on hold Current WIP: Berlin by Corel On Shelf: HMS Bounty (Billings), Link to comment Share on other sites More sharing options...
Dan Vadas Posted April 22, 2013 Author Share #337 Posted April 22, 2013 where are the retaining pins for the capstan bars? I'll leave those for Remco . OK, I took Druxey's challenge after all - here's a prototype REPRESENTATION of a Bar Pin and "Chain" which took me about half an hour to make. I used 0.2mm (blackened) copper wire wrapped around a 0.25mm drill bit for the "chain", and made two "eyebolts" from the same wire : And here's an approximation of how it looks by the naked eye : I'm going to do another one using a simplified method (no actual Pin and Bolt, just one curled wire). If I can get it down to 5 minutes each and they look OK I'll do all 15. Stay tuned . Danny WackoWolf, druxey, garyshipwright and 1 other 4 Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
Jim Lad Posted April 22, 2013 Share #338 Posted April 22, 2013 Certainly will stay tuned as you take up the 'Druxey pin challenge'.! John Quote Link to comment Share on other sites More sharing options...
Dan Vadas Posted April 22, 2013 Author Share #339 Posted April 22, 2013 Thank you John and Brian. Here's #2 - about 10 minutes worth, including blackening. It's the one on the left in pic 4 and looks even better than #1, so I'm going ahead with all 15. Am I going crazy ??? :D : Danny garyshipwright, Shazmira and Sjors 3 Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
mtaylor Posted April 22, 2013 Share #340 Posted April 22, 2013 I guess Remco will now have to "catch up" to you? I think you rose to the "Druxey Challenge" and exceeded it . Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Jim Lad Posted April 22, 2013 Share #341 Posted April 22, 2013 Nicely done, Danny. I wonder if there's a Druxey Challenge Cup? John Quote Link to comment Share on other sites More sharing options...
WackoWolf Posted April 22, 2013 Share #342 Posted April 22, 2013 Also if there is such a cup can Danny drink his Ale from it. Danny, Excellent detail work as always, and I agree Remco is now going to have to catch up to you LOL. Keep the pictures and post coming. Quote Wacko Joe Go MSW :) Link to comment Share on other sites More sharing options...
lamarvalley Posted April 22, 2013 Share #343 Posted April 22, 2013 Alrighty then... can't wait to see how those 'springs' play out. Quote Link to comment Share on other sites More sharing options...
gjdale Posted April 22, 2013 Share #344 Posted April 22, 2013 Nice Danny! Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout Link to comment Share on other sites More sharing options...
Remcohe Posted April 22, 2013 Share #345 Posted April 22, 2013 Very nice Danny! I guess Remco will now have to "catch up" to you? I think you rose to the "Druxey Challenge" and exceeded it . alarenverse.gif We'll see when I get there, my capstans 1.0 definitely don't have retaining pins. I think Danny is pushing me now to make 2.0 Remco mtaylor 1 Quote Treat each part as if it is a model on its own, you will finish more models in a day than others do in a lifetime. Current build HMS Kingfisher MSW 1.0 log click here Link to comment Share on other sites More sharing options...
Dan Vadas Posted April 23, 2013 Author Share #346 Posted April 23, 2013 Thanks Mark, John, Joe, lamarvalley (you got a name? ), Grant and Remco. I think Danny is pushing me now to make 2.0 No need for a remake Remco, just drill a few more holes in the ones you've already made . Here's the final results - they look pretty realistic in real life. One tip - Birchwood Casey Brass Black doesn't work on copper (I should have remembered this). It turns black all right, but it flakes off straight away leaving a mess behind . I'll have to get some Liver of Sulphur for future work with copper : Danny mtaylor 1 Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
BANYAN Posted April 23, 2013 Share #347 Posted April 23, 2013 Nice work Danny, they look good. You may have opened yourself up here mate; what's the next challenge going to be cheers Pat Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64) Link to comment Share on other sites More sharing options...
mtaylor Posted April 23, 2013 Share #348 Posted April 23, 2013 Looks super nice, Danny. I think the next order of business is to design the "Druxey Challenge Cup". Maybe something at 1:48? Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Dan Vadas Posted April 23, 2013 Author Share #349 Posted April 23, 2013 Thank you Pat, Mark and Crackers. You may have opened yourself up here mate; what's the next challenge going to be? Compared to the bar pins, quite an easy one - the Capstan Pawls. These prevent the capstan from turning back, they were very simple things that were pushed into place with the foot of the sailor nearest to them. Later ships had more complex arrangements. These were made from a piece of 1/16" square brass, filed down to 1/32" for most of their length - they step up to full height on the end that locks into the capstan whelps. They are held in place with a 3/4" bolt. Note how one pawl locks into place whilst the other is almost halfway across a whelp - this gave them two bites with a smaller rotation between. I've also made the two for the upper capstan with these. That concludes the work on the capstans for now - all that's left is to fit them, which I'll do after I've placed the Guns in this area (I'm still waiting on the barrels before I can start on them). Next job will be the Rudder and associated works. Danny druxey, st george, avsjerome2003 and 3 others 6 Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
WackoWolf Posted April 23, 2013 Share #350 Posted April 23, 2013 Danny, I know it has already been said, but this is an excellent build you are doing. I also like the fact that you also show everyone that you are human just like the rest of us. Keep the pictures coming. Quote Wacko Joe Go MSW :) Link to comment Share on other sites More sharing options...
druxey Posted April 23, 2013 Share #351 Posted April 23, 2013 Caramba!!!! I only expected the pins in their holes, not their chains as well, Dan. You've exceeded the challenge; which was only in jest, by the way! Well done. Now, what fiendish detail can I think of? Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv Link to comment Share on other sites More sharing options...
Padeen Posted April 23, 2013 Share #352 Posted April 23, 2013 I have only one word that comes to mind: waw! Is this even possible? Well done Danny... The chains were there so that the bar pins would not be lost, right? Will you make a working rudder assembly? (trying to contribute to the "druxey challenge cup" ) Quote Padeen (Adeline) "When there is a will, there is a way" Completed build: Le Camaret - Constructo - static wood 1:35 (build log, gallery) Current build (very limited modelling time at the moment...): HMS Fly - Amati/Victory Models - static wood 1:64 (build log) Projected build: HMS Victory - Chris Watton's design - static wood 1:64 (when available..., no rush!) Link to comment Share on other sites More sharing options...
rekon54 Posted April 23, 2013 Share #353 Posted April 23, 2013 wonderful job sincere congratulations rekon54 Quote If a day will be reproached you that your job has not been done with professionalism, you answer that the ark of Noè has been built by dilettantes and the Titanic by professionals. my web site: http://www.modellismodarsenale.com Link to comment Share on other sites More sharing options...
Geoff Matson Posted April 23, 2013 Share #354 Posted April 23, 2013 Well done Danny, your capstan is truley a work of art. Quote Geoff NRG member #2666Current build : USS Constitution Finished builds: Armed Virginia Sloop (in gallery) Link to comment Share on other sites More sharing options...
Dan Vadas Posted April 23, 2013 Author Share #355 Posted April 23, 2013 Thanks Joe, Druxey, Adeline, reckon54 and Geoff. You've exceeded the challenge; which was only in jest, by the way! I knew that Druxey . The chains were there so that the bar pins would not be lost, right? Correct . Will you make a working rudder assembly? Yes Adeline - it's not very difficult to do, apart from the rigging to the ship's wheel. Rudder The rudder is made from two main pieces of timber which are "tabled" together. I've made a simplified joint, there should be alternating tables in each piece but as only one side is seen at a time the difference isn't noticeable : Danny Quote Cheers, Danny ________________________________________________________________________________ Current Build : Forced Retirement from Modelling due to Health Issues Build Logs : Norfolk Sloop HMS Vulture - (TFFM) HMS Vulture Cross-section 18 foot Cutter Concord Stagecoach 18th Century Longboat in a BOTTLE CARD Model Build Logs : Mosel Sydney Opera House (Schreiber-Bogen) WWII Mk. IX Spitfire (Halinski) Rolls Royce Merlin Engine Cape Byron Lighthouse (HMV) Stug 40 (Halinski) Yamaha MT-01 Yamaha YA-1 HMS Hood (Halinski) Bismarck (GPM) IJN Amatsukaze 1940 Destroyer (Halinski) HMVS Cerberus Mi24D Hind (Halinski) Bulgar Steam Locomotive - (Modelik) Tanker and Beer Wagons (Modelik) Flat Bed Wagon (Modelik) Peterbuilt Semi Trailer Fender Guitar Restorations for Others : King of the Mississippi HMS Victory Gallery : Norfolk Sloop, HMAT Supply, HMS Bounty, HMS Victory, Charles W. Morgan, 18' Cutter for HMS Vulture, HMS Vulture, HMS Vulture Cross-section, 18th Century Longboat in a Bottle Other Previous Builds : Le Mirage, Norske Love, King of the Mississippi Link to comment Share on other sites More sharing options...
Shazmira Posted April 23, 2013 Share #356 Posted April 23, 2013 Danny, you continue to astound me. My hat is off, and I bow to your mastery!! Keep the pics coming please...I am trying to soak some of that skill through the computer into my own fingers! Quote Robbyn If you risk nothing, you risk everything! Current builds Syren (Model Shipways) version 2.0 AL San Francisco II Mordaunt (Euro Model) Completed Builds 18th Century Longboat designed by Chuck Passaro In the closet Battle Station Al Charles Morgan (1980s version) Link to comment Share on other sites More sharing options...
michael mott Posted April 24, 2013 Share #357 Posted April 24, 2013 Very nicely done Danny. Michael Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
Jim Lad Posted April 24, 2013 Share #358 Posted April 24, 2013 Horror! Shock! Danny took a short cut with the rudder tabling! John lamarvalley 1 Quote Link to comment Share on other sites More sharing options...
mhegazi Posted April 24, 2013 Share #359 Posted April 24, 2013 NICE it's amazing how wood obeys u , keep up the good work Quote Link to comment Share on other sites More sharing options...
gjdale Posted April 24, 2013 Share #360 Posted April 24, 2013 NICE it's amazing how wood obeys u , keep up the good work He trains it specially! Wait until you see his performing wood worms!!! :D mtaylor, newbuilder101, Sjors and 1 other 4 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.