Jump to content

Bristol Pilot Cutter by michael mott - 1/8 scale - POF


Recommended Posts

Michael, 

 

If I lived anywhere near you instead of 2500 miles away, you’d never be able to get me to go home. I’m not sure which I like the most, your model building skills or your tools ( which of course you had to go and make yourself!). The Renaissance man. I’m sure you write symphonies and correct Einstein’s equations just for whimsy. You are my role model IF and when I should ever grow up. 

 

Its just all so nice.

 

Kurt

 

Member: Ship Model Society of New Jersey

Link to comment
Share on other sites

Hi Mark the shooting board is made from a bunch of scrap pieces of 1/4 inch plex The styrene strips are 1/2 x 3/16 stacked glued with microweld

 

IMG_5285x1024.jpg.71fae03d7be29b364e0f085ca38e10bc.jpg

 

I like to clean up the edges of the styrene with a plane because it leaves a perfectly smooth square edge

 

150785759_CopyofDCP07100.thumb.JPG.585968946705060b243b55086aa0147c.JPG

 

Michael

 

 

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Kurt you would not like the winters here!

I had a chunk of Teak salvaged from a friends Columbia 8.6 meter sailboat. So decided that the seats needed to be teak so stipped up a little and thicknesses it with the block plane thickness jig down to 1/8th.

 but as I was loading the pictures into the cockpit folder noticed this picture from 2013

 

IMG_9443x800.jpg.1862d65537b51f7c6a2704ca2afd6e13.jpg

 

The cockpit has gone through a number of iterations since then but I think I am on the home stretch now.

 

IMG_5669x1024.thumb.jpg.8db08f15adca690498bbd82d8dcd43b7.jpg

 

IMG_5674x1024.thumb.jpg.7efddc97dd580b1c81d6318e3c87e7d5.jpg

 

IMG_5676x1024.thumb.jpg.fcf4e7bda8f56b6c4e901a518c664f5e.jpg

 

I am wondering about bleaching it......or using some teak oil.

 

Michael

 

Edited by michael mott
photo out of sequence

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Michael, nice idea, using plexiglass for the shooting board. Mine is baltic birch ply, and the surface the plane slides along is starting to get pretty grungy from the metal of the plane. Works, but unsightly.

 

I forgot to ask: did I read somewhere correctly that "clocking" screws means lining up the slots with each other?

 

Best wishes,

 

Mark

Link to comment
Share on other sites

25 minutes ago, SJSoane said:

I forgot to ask: did I read somewhere correctly that "clocking" screws means lining up the slots with each other? 

Hi Mark, I have never heard that expression, so being the curious chap that I am I did a search and found some surprising answers, it seams that it depends on who you follow. the watch and clock folk or the fine woodworkers. So Thanks for asking the question. One learns something every day.

 

For myself it was basically an aesthetic decision.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Slight digression on the alignment of slot screwheads: When I was young my father, who was a mechanical and electrical engineer, taught me to always align screw heads on wall switch plates vertically. The reason? Vertical slots gather less dust than horizontal ones!

Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series  http://trafalgar.tv

Link to comment
Share on other sites

I am not actually into watchmaking/-repair, but due to my heavy involvement with watchmaking machinery I have been frequently involved with that community too. I also remember my father telling me something about aligning screw-slots ... his father was a precision mechanic.

 

Anyway, it is impractical to align screw-slots in metal, as you simply cannot tighten them beyond a certain point without risking to either shear off the head, or damage the slot - conversely, it you don't tighten them enough, they will become loose. Thus it is virtually impossible to line-up countersunk screws, particularly when also their top has to be flush with the surrounding material. In the case of cheese-head screws watchmaker have a special tool with which they can shave of a bit from the underside of the head until the slots align. It is a trial-and-error procedure that is very time consuming and you also risk to damage the slot by repeated tightening and loosening.

 

On the other hand, it is usually no problem to align slots in wood screws. The wood is elastic enough to just turn the screw a bit more. One has to be cautious, of course, also, as you may rip out the whole screw, if you overdo it - guess how I know this 😏

Edited by wefalck

wefalck

 

panta rhei - Everything is in flux

 

 

M-et-M-72.jpg  Banner-AKHS-72.jpg  Banner-AAMM-72.jpg  ImagoOrbis-72.jpg
Link to comment
Share on other sites

welfalck, that explains very nicely the difference between the metal and wood workers regarding this clocking idea. Thanks.

 

Mark

Link to comment
Share on other sites

I have been gluing the base retaining strip around the cockpit shell, once it is finished being glued I will add the screws to give it some shear strength.

I was originally thinking of bending the strip but did not want to lay up a number of layers and so opted to build up the corners with segments. The test experiments with bending through the sharp curve with Mahogany proved to be a failure. 1/32 yellow cedar bent beautifully but it is the wrong colour.

 

I cut some strips of Pacific Yew, I had some nice tight grained stuff, the profile is approx 2 inches high by 3/4 (1/4 x 3/32)

 

IMG_5678x1024.jpg.6b32e2440dbdbc2f45666df379ee2ca7.jpg

 

I put a small bevel on the top with the mini plane.

 

IMG_5692x1024.thumb.jpg.110b4aa72d77f7e94ae74b897ea7e651.jpg

 

After the four flat pieces are glued I will add the corners.

 

IMG_5693x1024.thumb.jpg.0e8bf9e23cc679e7c91731a31869a73a.jpg

 

I did do some work thinning down a piece of Green leather and after an hour where I did get about 4 square inches down to .022" but decided that the green was the wrong colour.

 

I am doing some tests with some very thin Brown and tan coloured leather. The plan being to make the tops and bottoms brown with tan sides. Testing the method of stitching.

 

IMG_5695x1024.jpg.9ecbbf7780d6e1800a571f49e895d2e0.jpg

 

Michael

 

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Nice work Michael, the scarfed joint on top of the cockpit shell look fantastic

 

The clerk of the cheque's yacht of sheerness

Current build HMS Sirius (1797) 1:48 scratch POF from NMM plans

HMS Winchelsea by chuck 1:48

Cutter cheerful by chuck 1:48

Previous builds-

Elidir - Thames steam barge

Cutty Sark-Billings boats

Wasa - billings boats

Among others 😁

 

Link to comment
Share on other sites

Michael, another source for thin leather is modelmotorcars.com Marvin has a selection of leathers used for upholstery for Pocher car kits.

Edited by xken

Ken

Current build: Maersk Detroit"
Future builds:  Mamoli HMS Victory 1:90
Completed builds: US Brig Niagara, Dirty Dozen, USS Constitution, 18th Century Armed Longboat
https://modelshipworld.com/index.php?/topic/11935-uss-constitution-by-xken-model-shipways-scale-1768/

 

Link to comment
Share on other sites

4 hours ago, druxey said:

Do you actually need to use leather to imitate leather?

Ah...... yes because I am not simulating it, these cushions will be soft just miniature versions of the same.

 

4 hours ago, paulsutcliffe said:

the scarfed joint on top of the cockpit shell look fantastic

 

Paul I used some apple wood and cut the wood out from around a knot when i did this because I did not like the first attempts

 

IMG_2631x800.jpg.2bf133390eb3dd42838de920fa3448e6.jpg

 

1 hour ago, xken said:

Michael, another source for thin leather is modelmotorcars.com

Ken, thanks for this I will check them out.

 

1 hour ago, TBlack said:

BTW, how do you thin down leather?

Hi Tom, My Brother who is in the film industry in special effects, taught automobile upholstery in England before he came to Canada told me that the process is call skieving (Spelling?) and that they have machines to do it. before he told me that yesterday I did it like this with a utility knife by laying it over the short bit of standard brass plumbing tube and slicing it down.

IMG_5684x1024.thumb.jpg.661b9753cbc0bda264d5ede8382b89b9.jpg

 

IMG_5685x1024.thumb.jpg.1288168ca5cd962a8bb272522d84eb6e.jpg

 

So I know it can be done for small amounts, but as I noted earlier the brown is a more compatible colour for me. That said, I would be OK with Burgundy. But I have brown and tan so depending on how it turns out, I'll see.

 

9 hours ago, wefalck said:

Did I get you onto something with the saddlery ... ?

Eberhard, I do enjoy these little side trips that this model takes me on.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Hi Michael 

 

How thin do you need the leather to be? My wife has some very fine (and thin) leather gloves - would gloves be a potential source?

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

Hi Keith, the old thin ladies leather cloves are the perfect source for the thin leather. that is where I got the tan leather from. the brown leather came from a ladies leather shirt that I picked up at a thrift store for $20 a few years ago.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

I hope @archjofo doesn't mind that I show here the tool he uses to split leather for some leathering work on his rig:

 

f358t643p158857n3_bDFCslpq.jpg

I also seem to have seen on ebay some tool for splitting leather from Chines sources - there appear all sorts of unusual or tools not seen for decades in Western Europe on Chinese ebay-shops.

I think there used to be a sort of scraper with a half-round blade to thin out leather - if they were still alive I would ask my grand-aunt or my great-grandfather, they had a glove-factory.

Edited by wefalck

wefalck

 

panta rhei - Everything is in flux

 

 

M-et-M-72.jpg  Banner-AKHS-72.jpg  Banner-AAMM-72.jpg  ImagoOrbis-72.jpg
Link to comment
Share on other sites

You can also purchase leather in any color from Model Motorcars https://model-motorcars.myshopify.com/products/real-leather. Also, spend a few minutes looking at these scale masterpieces.

Greg

website
Admiralty Models

moderator Echo Cross-section build
Admiralty Models Cross-section Build

Finished build
Pegasus, 1776, cross-section

Current build
Speedwell, 1752

Link to comment
Share on other sites

Very nice joinery on those corners of the cap rail Michael,  very nice complimentary choice of woods.

 

Thanks for the learning experience on the leather folks; another tid-bit to store away.

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Thanks for all the information about the leather. Griphos, I shall check out Tandy because there is an outlet not far from me. Greg, I went to the Site you linked to and I was not able to find the size of the sheets that they are selling and at $50 per sheet I am thinking that there might be some better solutions.

Eberhard I did also note the device that Johann made good for narrow strips, I am not sure about wider sheets though. Pat, Thanks.

 

I am starting to glue the corners on the outside of the cockpit now, once they are all glued i will do the final finishing all round then ad some Teak oil to finish.

 

IMG_5700x1024.thumb.jpg.30df82a232f0eba9ee0f7ef5e3eb5f17.jpg

 

IMG_5703x1024.thumb.jpg.fb8bea7ad5876860927a25b24421adf3.jpg

 

IMG_5707x1024.thumb.jpg.8d29df8cf099edde535a9182f5659655.jpg

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Beautiful work Michael...just fine.

Question:  Are you making leather seats or leather cushions?  Wouldn't salt water be rough on them?

 

Rob

Current build:

Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196

 

 

Finished build:

Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/#

 

Current build(On hold):

Build log: 1/96  Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/

 

Completed build:  http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/

The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts."

Link to comment
Share on other sites

Hi Rob, just cushions.

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

I have a whole new appreciation for quilters.

First a new tool to punch holes in the leather, using some  scraps of ebony, brass and Drill rod.

IMG_5714x1024.thumb.jpg.a12a3e9d6adeaefb0e925859c416ee39.jpg

 

The tip was polished and hardened and tempered to a straw colour, and the very tip left flat about .010"

 

IMG_5717x1024.thumb.jpg.3f981d3605fc765d0a87115b58c8ab3c.jpg

 

IMG_5718x1024.thumb.jpg.3472fcbdea67a41be7151da9d4607b5c.jpg

 

Next the holes were punched along the edges.

 

IMG_5722x1024.jpg.25d6cd14bb1824c9452a38a10f2de8ef.jpg

 

Then hand stitched, with a dull needle.

 

IMG_5725x1024.thumb.jpg.438e08de6d6d09a300c1a86edcbcf62a.jpg

 

I think this will work out OK

 

IMG_5727x1024.thumb.jpg.ac1f945d58821e1374108d02546c6f54.jpg

 

Off to pick up my new hearing aids and play with the grandkids this afternoon.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Nice work Michael. May be better to fit hearing aid after playing with grandchildren. Or maybe they are beyond the noisey stage?

Keith

 

Current Build:-

Cangarda (Steam Yacht) - Scale 1:24

 

Previous Builds:-

 

Schooner Germania (Nova) - Scale 1:36

https://modelshipworld.com/topic/19848-schooner-germania-nova-by-keithaug-scale-136-1908-2011/

Schooner Altair by KeithAug - Scale 1:32 - 1931

http://modelshipworld.com/index.php/topic/12515-schooner-altair-by-keithaug-scale-132-1931/?p=378702

J Class Endeavour by KeithAug - Amati - Scale 1:35 - 1989 after restoration.

http://modelshipworld.com/index.php/topic/10752-j-class-endeavour-by-keithaug-amati-scale-135-1989-after-restoration/?p=325029

 

Other Topics

Nautical Adventures

http://modelshipworld.com/index.php/topic/13727-nautical-adventures/?p=422846

 

 

Link to comment
Share on other sites

Very nice Michael; I have a couple of chairs back here that need reupholstering ;)  I like the adapted tool; great idea as a pointed awl simply does not open the hole as such.

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...