JesseLee Posted April 11, 2018 Author #1081 Posted April 11, 2018 15 hours ago, BETAQDAVE said: How did you get that realistic sag in the ratlines and how did you get it to stay put? I "paint" them with watered down white glue. This holds the hitches and the shape. I sort of shape them with the paintbrush before it dries. They dry pretty quick. If you need to re-shape them just dip the brush in water and go back over it so you can work on the shape of the sag. Jesse GaryKap, Tom E, Chasseur and 10 others 13 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
JesseLee Posted April 12, 2018 Author #1082 Posted April 12, 2018 Clove hitch, clove hitch, clove hitch, clove hitch, clove hitch.............clove hitch, clove hitch, clove hitch, clove hitch, clove hitch................. Jesse Elijah, Piet, Tigersteve and 17 others 20 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
Nirvana Posted April 12, 2018 #1083 Posted April 12, 2018 But it looks so good popeye the sailor, mtaylor, JesseLee and 4 others 7 Quote Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Piet Posted April 12, 2018 #1084 Posted April 12, 2018 Boring for sure - - - but look at the results, just outstanding. Cheers, cog, JesseLee, popeye the sailor and 4 others 7 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
cog Posted April 12, 2018 #1085 Posted April 12, 2018 Keep it up, a few more to the top ... and then the other side ... you are doing marvelous popeye the sailor, Piet, JesseLee and 4 others 7 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ...
usedtosail Posted April 12, 2018 #1086 Posted April 12, 2018 Jesse, those ratlines look so real. Seizing the ends to the shrouds to me is the real key here. I always have trouble with some of the ends coming undone if I just use a clove or a luggage hitch on them. Next time, I am going to use your technique for sure. Thank you. BTW, I used to think that tying the clove hitches was a lot of work, but I think if I counted the number of seizings I have had to do on the Constitution rigging, it would be a lot more than the number of clove hitches in the ratlines. Canute, Pogy647, popeye the sailor and 4 others 7 Quote - Tom - Current Build: Ochre Beagle Completed: Vanguard Speedy, Vanguard Duchess of Kingston, Stove Project, Ships Wheel Project, NRG Capstan Project, Billings Half Moon, Dumas Chris Craft 1938 27' Triple Cockpit Barrel Back, Panart Santa Lucia , Model Shipways Constitution , MS Bounty Launch , Mamoli HMS Beagle Member: Nautical Research Guild
JesseLee Posted April 26, 2018 Author #1087 Posted April 26, 2018 I finished the ratlines. Did them on the futtock shrouds too. On 4/10/2018 at 6:23 PM, BETAQDAVE said: How did you get that realistic sag in the ratlines and how did you get it to stay put? I failed to give enough detail. After tying off the lines the watery glue is brushed on and let dry to seal all the line ends where they are tied and hitched. Shape as needed as the glue gets about half-way dry. When the whole thing is done I water brushed them to thin down any areas where the glue may show on the knots and hitches. You want them to look like you just tied them. After all this I usually do another light brushing of water with a drop or two of paint to match the original rope color to mask any glue washed look to them. This is a very light wash. I immediately dry it by lightly pressing front and back sides between my fingers where space allows this. I try to have cut pieces of cloth like handkerchief material around my fingers. You can also use cotton swabs in hard to reach areas. I have chosen dark brown instead of black rope for my standing rigging so I had a drop of black and brown in the wash. This can sometimes slightly tighten it up when the wet ropes dry. I learned this from my flagpole ropes outside. You can also use a stain for this if you want instead of the water/paint wash. I don't like it as well because to me the ropes turn out looking more wet/oily looking from the stain. The water paint wash leaves them flat and dry looking like regular rope. I know some will think this overkill but I love the final resulting look. Jesse cog, lmagna, DenPink and 22 others 25 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
SGraham Posted April 26, 2018 #1088 Posted April 26, 2018 Jesse, this build is absolutely breathtaking. Steve Piet, popeye the sailor, mtaylor and 3 others 6 Quote completed models: Shenandoah (Corel) waiting on the shelf: La Sirene (Corel) Half Moon (Corel) Puritan (Mamoli) Patsy (derisively): "It's only a model." Arthur: "Sshhh."
cog Posted April 26, 2018 #1089 Posted April 26, 2018 (edited) Super job Jesse Edited April 26, 2018 by cog popeye the sailor, Canute, JesseLee and 2 others 5 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ...
Tim Curtis Posted April 26, 2018 #1090 Posted April 26, 2018 Love your build. Love your wonderful attention to detail. Ratlines seem to have just right amount of slack....beautiful. Tim popeye the sailor, BETAQDAVE, JesseLee and 4 others 7 Quote
popeye the sailor Posted April 26, 2018 #1091 Posted April 26, 2018 clove hitch.........two words you will never misspell again {not that you did......just say'in}. super job on the ratz........they look great! cog, Piet, mtaylor and 3 others 6 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
Vivian Galad Posted April 26, 2018 #1092 Posted April 26, 2018 Great work Jesse! Old Collingwood, JesseLee, popeye the sailor and 4 others 7 Quote Current: Red Dragon (modified) by Vivian Galad - Artesania Latina - 1:60 Oseberg (modified) by Vivian Galad - Amati (1:50)Cocca Veneta by Vivian Galad - Corel - 1:70 Finished 15th Century Latin Caravel kit model from Artimanha models
Piet Posted April 27, 2018 #1093 Posted April 27, 2018 Those ratlines look magnificent JesseLee, masterfully done. Cheers, popeye the sailor, mtaylor, Canute and 1 other 4 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
JesseLee Posted May 22, 2018 Author #1094 Posted May 22, 2018 It has been a while again. Health and wife....umm...I mean life, keeping from the workbench. I have been working on the Main and Fore Topmast Shrouds. Got 2 sets on the fore and while working on the main there were some kids in the house wanting to see trying to climb all over me and they made me accidentally cut the shroud right in the middle. Part of it was served, both deadeyes already tied on and I did not want to have to re-do all this. Very frustrated. Jesse Piet, CDW, Canute and 6 others 9 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
JesseLee Posted May 22, 2018 Author #1095 Posted May 22, 2018 The next day before starting all over I thought I would test an idea I've had but never tied. I have read in books how they spliced ropes together sometimes. This would be a good time to see if I can do this at this scale. I untwisted the strands of the other end of the shroud that had a lot extra still on the end that had not been cut off. Untwisted the cut side, spaced these two together to the correct length and re-twisted the rope together. Luckily this line naturally went right back in place very well. I painted it with watered down white glue and CA the spot at each end where the splicing ended. When the glue dried ans everything was trimmed up it was good as new. Jesse Gahm, egkb, pythagoras and 18 others 21 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
cog Posted May 22, 2018 #1096 Posted May 22, 2018 Sorry to hear about wife ... uhhh , excuse me, life getting in the way. Looks a very good .. double splicing ... should have known you come up with something like that Pogy647, JesseLee, Piet and 4 others 7 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ...
Altduck Posted May 22, 2018 #1097 Posted May 22, 2018 Nice Save! Looks good, and a new trick in your bag. Canute, JesseLee, cog and 4 others 7 Quote Richard
popeye the sailor Posted May 23, 2018 #1098 Posted May 23, 2018 things happen for a reason.........testing you to see if you can outwit the model I'd give anything to have my grand kids climb all over me......I just don't see them enough { I'm sure to get my fill when I do see them though } nice repair........there is no real rule that all dead eyes are equal in length. if they are off a tad, it's fine. I feel it makes the model look more life like. I hope all is better now......your dedication to this model is highly admired you've done a superb job on her ! JesseLee, cog, BETAQDAVE and 5 others 8 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
Piet Posted May 24, 2018 #1099 Posted May 24, 2018 Beautiful work on the splice JesseLee. Yeah, stuff happens sometimes but - they say it builds character Cheers, popeye the sailor, BETAQDAVE, JesseLee and 3 others 6 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
HIPEXEC Posted May 24, 2018 #1100 Posted May 24, 2018 Looking good! Hammocks are a very nice touch. Canute, JesseLee, Piet and 1 other 4 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
BETAQDAVE Posted May 25, 2018 #1101 Posted May 25, 2018 23 hours ago, Piet said: Beautiful work on the splice JesseLee. Yeah, stuff happens sometimes but - they say it builds character I guess that I would second that assessment! Of course that was just another opportunity to use some more of that innovative problem solving that you are so good at. That is something that we have in common and it's one of my favorite things about modeling. Piet, Canute, JesseLee and 1 other 4 Quote Dave “You’ve just got to know your limitations” Dirty Harry Current Builds: Modified MS 1/8” scale Phantom, and modified plastic/wood hybrid of Aurora 1:87 scale whaling bark Wanderer. Past Builds: (Done & sold) 1/8” scale A.J. Fisher 2 mast schooner Challenge, 1/6” scale scratch built whaler Wanderer w/ plans & fittings from A.J. Fisher, and numerous plastic kits including 1/8” scale Revell U.S.S. Constitution (twice), Cutty Sark, and Mayflower. (Done & in dry dock) Modified 1/8” scale Revell U.S.S. Constitution w/ wooden deck and masting [too close encounter w/conc. floor in move] Hope to get to builds: MS 3/16” scale Pride of Baltimore II, MS 1/2” scale pinky schooner Glad Tidings, a scratch build 3/16” scale Phantom, and a scratch build 3/16" scale Denis Sullivan.
JesseLee Posted June 25, 2018 Author #1102 Posted June 25, 2018 Thanks for all the comments and likes. It has been a while. Health condition is slowing me down. The hardest part is getting used to the fact that getting less done is probably going to be the new norm. I have started working on the topmast shrouds and ratlines. Very slow but plugging along! Jesse BETAQDAVE, mtaylor, Vivian Galad and 18 others 21 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
Peter Bloemendaal Posted June 25, 2018 #1103 Posted June 25, 2018 Looking Great Jesse. Peter. JesseLee, popeye the sailor, cog and 5 others 8 Quote Current Build: USF Confederacy 1778 - Model Shipways - 1:64 Completed: US Brig Syren - Model Shipways - 1:64 San Francisco Cross Section - Artesania Latina - 1:50 Future build: HM Granado - Caldercraft - 1:64 LeRenard - Artesania Latina - 1:50
Jim Rogers Posted June 26, 2018 #1104 Posted June 26, 2018 Hang in there Jesse. She is looking divine. mtaylor, Chasseur, Canute and 4 others 7 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut.
Piet Posted June 26, 2018 #1105 Posted June 26, 2018 Keep on plugg'n JesseLee, we're with you. Cheers, Canute, cog, Ryland Craze and 5 others 8 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
cog Posted June 26, 2018 #1106 Posted June 26, 2018 You straightened out the shrouds very neatly. Job well done. Up to the next step. You are doing fine! Keep it up. Piet, Canute, Chasseur and 3 others 6 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ...
HIPEXEC Posted June 26, 2018 #1107 Posted June 26, 2018 Damn the health issues....full speed ahead! (I Know what you mean) Tigersteve, Piet, popeye the sailor and 5 others 8 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
popeye the sailor Posted June 26, 2018 #1108 Posted June 26, 2018 any progress is good progress Jesse...........there are no rules on speed amazing work your doing........! super job my friend! mtaylor, Canute, Pogy647 and 5 others 8 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
Beef Wellington Posted June 26, 2018 #1109 Posted June 26, 2018 lovely job, can't rush this stuff. mtaylor, Chasseur, Canute and 4 others 7 Quote Cheers, Jason "Which it will be ready when it is ready!" In the shipyard: HMS Jason (c.1794: Artois Class 38 gun frigate) Queen Anne Royal Barge (c.1700) Finished: HMS Snake (c.1797: Cruizer Class, ship rigged sloop)
JesseLee Posted July 11, 2018 Author #1110 Posted July 11, 2018 Working on the upper shrouds on the port side. My work area is way too cluttered, lol Jesse CDW, Vivian Galad, Tigersteve and 11 others 14 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.