Sloop Speedwell 1752 by Chuck - Ketch Rigged Sloop - POF - prototype build

[hmcarlin]

Any chance (with possible time frame) for others of us to get started on this beautiful project?  I'd love the opportunity to start working on chapter one while the rest of the prototype is getting finished!  Thanks.

 

[Chuck]

Chapter 4 instructions and materials list...

 

Chapter four materials.pdf

 

SpeedChapFourMono.pdf

[Chuck]

When chapter 5 comes out.  All of you guys building the model will get a complimentary figure to show scale.  I will randomly select one of these and include it in your order for that chapter.

 

[Freebird]

That's awesome Chuck! Thank you!

 

Question, when will chapter 4 be available? TIA!

 

Best Regards .... Rick

[Chuck]

Soon…I have a few other things ahead of making another batch.

 

chuck

[Freebird]

Cool, thank you Chuck!

 

Best Regards .... Rick

[Chuck]

I am actually in a comfortable position with my inventory so I could start spending time working on the model again.  I cant tell you how good that feels.

 

I am not doing any heavy stuff yet...but its a start.  I had time to finish rigging those last four cannon on the port side.   That alone was a great thing to have completed. That actually finished up chapter 8.

 

Its a good thing because chapter 9 is where the real fun begins.  Its basically all about those fun little deck fittings.  So I started slow..

 

 

There are four ladders to be built.   Two leading to the poop, and two leading to the fcastle deck.  These were made exactly like the others we have made for speedwell.  Everything is laser cut.  I just cleaned the char and assembled them.  One note however...because of the deck roundup, the ladders leading to the poop deck need some tweaking after being built.  The bottom of each side was left a tad longer so you can sand the inboard side shorter.  You will need to do this so your ladder doesnt slant when you place it against the bulkhead.  You want it vertical with the columns of the bulkhead behind them.  So that inboard side will need its bottom edge shortened slightly.

 

Its the little details.

 

Here is the shorter ladder up to the fcastle deck...and you can see the guns that I finally finished rigging.  Those are my Swiss Pear color 3D printed blocks used for the guns this time.  I switched them out to try both colors.  I think I will fully rig her with the Swiss Pear blocks now that I see them on the model.

In addition, I also finished the stack for the fire hearth...I had built this a while back when I made the fire hearth but it must have gotten lost during the move.  So I made a new one...I will also include those parts in chapter 9 in case anyone loses theirs as well.  Nothing difficult here...fake it till you make it.  We wont be using a real coaming here.  Its just a laser cut boxwood square basically.  Sand the char off and apply some WOP.  Then center the hearth stack where the laser etched reference is and you are finished.  I also knocked off the top edge all around this simulated coaming.  No hard edges for me!!

 

Here is what the stack looks like on the model.   

 

And here is an overall shot of the progress to date although I have some paint touch-up to do and some dust clean-up.  But its really nice to making some progress again.  Next up I will be finishing up the fcastle deck fittings.

 

[KentM]

Good for you Chuck. Don’t be like me.  I’m 721/2 yo.  I have been. Under the weather for 8 months and in hospital for 45 days with 2 very major heart surgeries.  I now have an LDVA implanted in my heart….bionic man.  I have on client left but I am going to focus on family and modeling…. I started POF back in 1986 but no longer on hold. Starting with Speedwell and going next to your other models and also Chris’s.  So happy to hear that you have a retirement plan.  If you would like to sell another Speedwell Battle Station I would be interested. I hope to be a regular contributor to the forum. Good luck. It is harder than you think so listen to your wife. 
have a good retirement

thank you

Kent

[scrubbyj427]

Really looks good Chuck!

[Chuck]

Thanks guys.  Kent I hope you are on the mend.  I really cant make any more battlestation kits because it was given away as a limited edition.  All 25 went fast and are being built which is great but they were signed and numbered.  
 

I doubt the guy who got kit number 7 of 25 would be very happy with me if I suddenly made another 25 kits.

 

But I could be wrong.

 

chuck

[glbarlow]

Limited Edition series 2? 😎

 

I’d be interested too should things change. Something I could build with my grandson. 

[Desertanimal]

That explains why I couldn’t find one on the site for sale! 👍

I would have liked one also. 
Chris

[Trussben]

Nice to see you back working on the Speedwell.

[Chuck]

Work continues on the model.  I am working on the hood for the fcastle hatch currently.  But I realized I hadnt yet posted an image of my new workspace for building the actual models.  This is probably the largest work bench I have ever had.  Its actually a ping pong table.  LOL

 

BUT its a pleasure to have such a large uncluttered surface to build on top off.   Speedwell at 3/8” scale is a very big model but it looks puny on my bench.
 

 

Oh and these new and inexpensive LED lights from Amazon are a real treat.  I have them on the forward side of the table and they can be manipulated in so many ways.  Its also very bright (up to 6000 lumens) and can be adjusted in intensity and other colors etc. 

 

In addition I have about 30 green cutting mats many are large and many are small.   I bought these for when my local club members come by for a workshop.  So everyone gets a cutting mat.   But in the meanwhile I can cover the whole front side of the space to keep everything safe and clean.

 

So now I can start being productive on my models again….until I am

compelled to beat my high score in pinball.  Which isnt that high actually.

 

Chuck

[scrubbyj427]

Looks awesome Chuck, you could start construction on a 1/48 ocean liner with that table. And a nice view to go along with it when you just need to do anything but stare at the ship models!

[yvesvidal]

Chuck, I love your new workplace but mostly the Bally Old chicago pinball machine, in the corner. It is one of my coveted machines, as I already own a Bally Mata Hari, Playboy, Silverball, Xenon and Medusa plus a Spanish machine from Recel. 

 

Yves

[Hubac's Historian]

That is definitely a dream of a work space, Chuck!  I am sure you could fill that whole space with WIP, when you’re fully up and going 😁.

 

As ever, the progress on the project is inspiring, and above all - informative.

Edited yesterday at 12:39 AM by Hubac's Historian

[Chuck]

Thanks guys…yes things are finally getting into a routine again.  My sons wedding in a few weeks will be the last bit of excitement.  
 

That old pinball machine was left by the previous owners.  It works but needs a bit of love repair.  The lights arent working on the back part but other than that its all good.  A nice distraction.  And yes another pet project should I need one.  I am Hoping the kids will take it off my hands so it becomes their project.

 

Chuck
 

 

[ChrisLBren]

Looks great Chuck - congrats on the new space.  I might want to pick up some of those LED lights - can you share the link ?

Thanks

Chris

[Chuck]

Heres the link…

 

https://www.amazon.com/stores/EPABINA/page/A1C50E56-00C9-494E-AADD-520D80BCC2A8?lp_asin=B0D2618676&ref_=ast_bln&store_ref=bl_ast_dp_brandLogo_sto

 

Chuck

 

https://www.amazon.com/gp/aw/d/B0D2618676?psc=1&ref=ppx_pop_mob_b_asin_title

[Chuck]

Making the hood for the fcastle companionway it is pretty straight forward but you have to be careful to align the sides properly before adding the top planks.

 

 

It is all laser cut.  Here are the pieces.

 

The two thick squares are crucial to its fit when completed. They are laser cut slightly wider than the coaming.  You need to sand the sides until the square is a nice press fit inside the coaming as shown below.

 

Then you can glue the two squares together to form an "L".  This "L" is the proper width if your squares were a nice fit in that coaming.   Then clamp the two side panels to them so you can start gluing the thin cover boards to it that form the roof.  The one thing you must be sure of when clamping the sides onto this fixture....dont glue it to the fixture!!!  Its just used to properly align the two sides the correct distance apart.  In addition, the two sides are no the same height. One side is longer than the other....the starboard side is longer.  This is because of the deck round-up.  So when clamping them to the fixture you must make sure the top edges are lined up and even.  See it below in relation to the squares on the mat.  The bottom edge shows each side being a different length.  But the top must be squared up and even.

 

Then start gluing the cover boards onto the sides.   One at a time.  But as you proceed, you must bevel the side as you are placing them on a rounded shape.  But dont over-do the bevel.  You dont need too much.

 

When you are almost done with the boards, the last final board is laser cut wider and at an angle to compensate for the bottom of the hood being at an angle.

 

When its all done you can sand the sides flush which were slightly longer than needed to clean it all up.   Then its time to test its alignment on the model.  It sits on top of the coaming...not within the coaming.   Look at it from dead on and from the side.  Make sure its straight and vertical and leaning to one side when viewed from the bow.   Make sure it is not leaning when viewed from the side.  You can sand the angle of the bottom of the hood to adjust any leaning.  Once satisfied, move onto the next step.

 

Now its time to cut small lengths from a 1/8 x 1/64" strip.  This is glued half onto the inside of the hood with the other half forming a nice lip.  This will be inserted into the coaming when done.  It should fit perfectly if your two squares and fixture was the correct width.

 

I am guessing that this hood was portable and removable.  So you dont even have to glue it in position if you have a good fit.  You can leave it natural or paint it bulwark red.  Its your choice.   I have painted it red to continue following the look and color scheme of the contemporary model.  The seams and joints and nails do show through after painting it but its very subtle which I prefer.  Mine is not glued in and it will prove useful as I may be removing it from time to time as it may get in the way of doing other work up there.  Now onto the bowsprit step....and belfry.