rafine Posted March 11, 2015 Author #1321 Posted March 11, 2015 Thanks so much Rusty. Your continuing interest is always appreciated. Thanks also to the "likes". Bob Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
Mirabell61 Posted March 11, 2015 #1322 Posted March 11, 2015 well done Bob! Nils Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
UpstateNY Posted March 11, 2015 #1323 Posted March 11, 2015 Hi Bob, Late to your build, but starting to follow along. Your Essex is amazing and I love the detailed pictures showing your beautiful rigging work. Great stuff. Looking forward to seeing the yards! Cheers, Nigel. Current Build Logs: H.M.S. Triton Cross Section, USF Confederacy Model Shipways Completed Log: Red Dragon Artesania Latina Gallery: Red Dragon: Artesania Latina Member: Nautical Research Guild
Gahm Posted March 11, 2015 #1324 Posted March 11, 2015 What a beauty! Thomas Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864)
Sjors Posted March 11, 2015 #1325 Posted March 11, 2015 I know it now for sure.......Aggy is on his way to you Bob !!!! Great rigging work !! Sjors Martin W 1 Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre
Martin W Posted March 11, 2015 #1326 Posted March 11, 2015 Very tidy work, Bob. Your skill is matched only by your patience in turning out such exemplary rigging. Cheers, Martin Current Build: HMS FLY 1776 Previous Builds: Rattlesnake 1781 Prince de Neufchatel
rafine Posted March 11, 2015 Author #1327 Posted March 11, 2015 Thanks so much Nils, Nigel, Thomas, Sjors and Martin for the very nice comments and also the "likes". Martin, I have no patience at all -- just persistence, like all of us have. Bob Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
rafine Posted March 14, 2015 Author #1328 Posted March 14, 2015 I've now made, mounted and rigged the spritsail and sprit topsail yards. The yards themselves were easy, since they are round in section throughout and only required tapering before adding the yard and arm cleats. I pre- rigged the yards by adding the halliard block, parrel, lifts and braces before mounting them on the pins previously set in the bowsprit and jibboom. The parrels were then completed and the halliards and lifts were led through their respective blocks/thimbles and back to the bow pinrail, where they were tied off and separate rope coils added.The braces were led back through the the blocks under the fore top (an incredibly fiddly job), but won't be tied off until sometime during the fore mast rigging. The last task was to complete the rigging of the jibboom and flying jibboom guys by leading them through eyebolts on the yards back to blocks and tackles at the bows that were tied off on the pinrail and coils added. Next will be the foremast yards and rigging. Bob Leo-zd, Remcohe, Ryland Craze and 34 others 37 Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
augie Posted March 14, 2015 #1329 Posted March 14, 2015 Nice work all around. Love the neat rope coils. Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956
Mirabell61 Posted March 14, 2015 #1330 Posted March 14, 2015 I love your rigging Bob, it Looks so clean and accurate, the sprit- and jib Yards are great, also the belaying in the bow area Nils Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
jwvolz Posted March 14, 2015 #1331 Posted March 14, 2015 Nice and clean Bob. Very nice. Joe Volz Current build: Model Shipways "Benjamin W. Latham" Completed builds on MSW: Caldercraft HMS "Cruizer" Caldercraft HMBV "Granado" Model Shipways "Prince De Neufchatel"
Sjors Posted March 14, 2015 #1332 Posted March 14, 2015 Your usual standard Bob ! Very, very nice. Sjors Currend builds: USS Constitution by Sjors - Model Shipways - Scale 1:76 HMS Victory by Sjors - Jotika - Scale 1:72 On hold: VOC Reconnaisance yacht Duyfken by Sjors - Kolderstok - Scale 1:50 Finished builds: HMS Snake (1797) by Sjors - Caldercraft - Scale 1:64 Nuestra Señora del Pilar by Sjors & Anja - OcCre - Scale 1:64 H.M. Brig-Sloop Flirt 1782 by Sjors - Vanguard Models - Scale 1:64 HMS Agamemnon by Sjors - Caldercraft / Jotika - 1:64 San Ildefonso - OcCre Le Mirage - Corel Smit Rotterdam (sea tug) - Billing Boats - 1:75 Sovereign of the seas - De Agostini Spirit of Mississippi - OcCre Santissima Trinidad - OcCre Corsair - OcCre
rafine Posted March 14, 2015 Author #1333 Posted March 14, 2015 Thanks so much Augie, Nils Joe and Sjors for the nice comments and also the "likes". Bob Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
gjdale Posted March 15, 2015 #1334 Posted March 15, 2015 Just lovely Bob. Up to your usual high standard I see! Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout
rafine Posted March 15, 2015 Author #1335 Posted March 15, 2015 Thanks so much Grant and the "likes". Bob egkb 1 Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
Trussben Posted March 17, 2015 #1336 Posted March 17, 2015 Sweet Ben Current builds: HMS Pegasus TFFM. Completed builds: HMS Winchelsea. ECHO cross section.18th C Longboat. QA Barge. Medway Longboat.
rafine Posted March 18, 2015 Author #1337 Posted March 18, 2015 Thanks so much Ben and the "likes". Bob Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
rafine Posted March 24, 2015 Author #1338 Posted March 24, 2015 I've begun on the fore mast running rigging by making and mounting the topgallant and royal yards and adding their rigging to the extent that I'm going to do it. It's my intention to do the yard rigging ( trusses, parrels, halliards, foot ropes, lifts, braces) and certain of the sail rigging ( clews, sheets, but no bunt, leech or reef lines). This has been my practice for quite a while and is entirely arbitrary, based upon my feelings about appearance and feasibility. I am also not doing any of the headsail and staysail rigging on this build. These first two yards, like the previously done spritsail and sprit topsail yards, are relatively simple, since they are round in section throughout. I added the cleats, foot ropes (on the topgallant), clew and sheet blocks, lift blocks (on the topgallant), halliard ties, one end of the parrels and brace pendants (on the topgallant) before mounting the yards on their pins on the mast. I then added blocks for the lifts at the mastheads and various blocks for the braces at the main topgallant mast, main topmast stay and fore top. I then ran the lifts, clews, halliards and royal sheets and tied off those that are belayed in the fore top. Rope coils were added for each belayed line. Lastly, I ran the braces, but didn't tie them off at this point. I'm now in the process of making the topsail yard and lower yard. Bob Martin W, NMBROOK, Barbossa and 19 others 22 Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
Mirabell61 Posted March 24, 2015 #1339 Posted March 24, 2015 Very nice work Bob, it Looks perfact at what percentage would you consider your rigging complete by now ? , must be nearly done.... Nils Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
rafine Posted March 24, 2015 Author #1340 Posted March 24, 2015 Thanks so much John, Nils and the "likes". John, having seen a good deal of your work, I have no doubt that you will do at least as well as me. Nils,It's not even close to done. I'm only on the first of the three masts -- and less than half done with that one. I'm thinking of months, not weeks. Bob Mirabell61 1 Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
NenadM Posted March 25, 2015 #1341 Posted March 25, 2015 Just dropped ... with my jaws down Masterpiece In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic
Gahm Posted March 25, 2015 #1342 Posted March 25, 2015 I can only agree . . . it is a fantastic model! And your building speed leaves me speechless! Thomas Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864)
rafine Posted March 25, 2015 Author #1343 Posted March 25, 2015 Thanks so much Nenad, Thomas and the "likes". It's easier to keep moving forward Thomas, when model building is basically your day job. The joy of retirement. Bob CaptainSteve 1 Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
NMBROOK Posted March 27, 2015 #1344 Posted March 27, 2015 Truly excellent work Bob Sadly I am not around much of late,due to supposedly moving.The buyer dropped out at last minute,so we are now back to square one with half of my tools now packed away Kind Regards Nigel Currently working on Royal Caroline
rafine Posted March 27, 2015 Author #1345 Posted March 27, 2015 Thanks so much Nigel. It's good to hear from you again. I'm sorry both about your lost buyer and your inability to devote time or attention to modeling. We miss you. Bob NMBROOK and CaptainSteve 2 Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
rafine Posted March 31, 2015 Author #1346 Posted March 31, 2015 Work continues on the fore mast yards and rigging. I have been doing the topsail and lower yards. The lower is now done and mounted and the rigging begun. The attached photos show the progression of work on the lower yard. It follows my usual scheme of starting with a round dowel, then cutting and filing a square section. adding wood strip to build up the square section, then filing that eight sided, then tapering and shaping the yard and finally adding the cleats. After completion of that work, the yard was prepared for mounting by painting it black, adding the foot ropes, the various blocks and lines attached to the yard and the studdingsail boom brackets and booms. Quite a tangle when it got done. The lower yard has now been mounted and I've begun running the rigging lines, but won't do photos until I've done the topsail yard, which is now in process. Bob cristikc, Barbossa, Leo-zd and 22 others 25 Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
Mirabell61 Posted March 31, 2015 #1347 Posted March 31, 2015 Very nice looking Yards Bob, looking foreward to seeing both foremast Yards rigged Nils Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
rafine Posted March 31, 2015 Author #1348 Posted March 31, 2015 Thanks so much Nils and John for the nice comments and also to the "likes". Bob Mirabell61 1 Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
KenW Posted March 31, 2015 #1349 Posted March 31, 2015 Great work as usual. Whenever I attempt to cut and file the square section, I can never get a proper square. The angles are always off. Do you have any shortcuts/advise? Thanks. Ken NO PIRACY 4 ME! (SUPPORTING CHUCKS' IDEA) Current Build: Washington 1776 Galley Completed Builds: Pilot Boat Mary (from Completed Gallery) (from MSW Build) Continental Boat Providence (from Completed Gallery) (from MSW Build) Continental Ship Independence (from Completed Gallery) (from MSW Build) Rattlesnake (from Completed Gallery) (from MSW Build) Armed Virginia Sloop (from Completed Gallery) Fair American (from Completed Gallery) (from MSW Build Log) Member: Ship Model Society of New Jersey Nautical Research Guild
rafine Posted April 1, 2015 Author #1350 Posted April 1, 2015 Thanks so much Ken and the "likes". Like everything else I do, Ken, this is low tech, seat of the pants. Basically I line out the area, clamp the piece in a vise and try to file to the lines. I will check it with a small square as I work my way around. It seems to come out square enough to work. Bob KenW 1 Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now