Jump to content

Recommended Posts

Posted

Absolutely fantastic work on the stove Gary! I'm salivating already just thinking about the roast pork you're about to serve up!

Posted

"Don't be too hard???  Gary, that excellent work and a fine example of good craftsmanship!  Going to add the slops bucket :) ?

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Posted

Thanks every one and those folks for there likes. I have got the stove further along and do think  I have come close to the cast iron look, at least as close as my skill will let me. Well back to work on her gun deck guys. Here is some updated photo's guys, and Mr Jones finally got a paint job along with the stove. Some were he seem to have picked up a slop bucket. Now I wonder where he got that from. Thanks again guy's.

 

Gary

post-264-0-55674300-1389307135_thumb.jpg

post-264-0-43063300-1389307164_thumb.jpg

post-264-0-54576800-1389307193_thumb.jpg

post-264-0-96058600-1389307222_thumb.jpg

post-264-0-06041600-1389307252_thumb.jpg

Posted (edited)

Hi Mark and thank you sir.

 

I had some metal priming paint that I sprayed it with and then sprinkled it with baby powder, not to much and most was blown off before the final coat of flat black was put on. I do believe that David in vol 2, TFFM, talked about putting some on the mould before he poured the metal for cannon's, to give them a cast look, so figure why not. I did do a little dry brushing with  a couple of different paint colors on top of that to help  high light certain area's. My wife thinks its a cute little stove, which is okay with me, being that she is my biggest critic.

 

 Thanks druxey. 

 

Gary

Edited by garyshipwright
Posted

Very nice work on the stove sir!

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Posted

Hi Gary, that is a wonderfull stove, looks absolutely realistic! Also good to see you updates, congrats for finishing deck planking! Fantastic work on pumps too!

 

Alex

Current build: HMS Sphynx, 20 gun ship launched in 1775 at Portsmouth, Hampshire.

 

On the drawing board: HMS Anson, 64 gun third rate ship of the line, launched in 1781 at Plymouth

 

Banner_AKHS.png

Posted

Thanks Michael, Pat and Alex. Well good sirs other then pot's and pan's the stove it complete, accept for the  stack. I finally added the pully's and chain, for the pit, which was just a little touche. Most of the new parts are made out of metal accept for the pulley's which are wood. Couldn't find any brass round stock big enough. Well back to the pump's. Gary

post-264-0-91887900-1389428905_thumb.jpg

post-264-0-11330100-1389428933_thumb.jpg

post-264-0-08463800-1389428960_thumb.jpg

post-264-0-21886000-1389428987_thumb.jpg

post-264-0-73272800-1389429013_thumb.jpg

post-264-0-06357100-1389429041_thumb.jpg

post-264-0-55946000-1389429068_thumb.jpg

Posted

Gary,

 

   Excellent work on the stove, one of the best I have seen. Keep the pictures coming. I have been following this build since MSW1, glad you still working on her. Thank you.

Wacko

Joe :D

 

Go MSW :) :)

Posted

With that stove, you can almost smell the dried peas and salt pork boiling away...  Impressive stove, Gary!!!

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Posted (edited)

Hi everyone,  I went and made a few items to go with the stove but after looking in on Remco stove and pot's, find his to be a lot cuter so going to have to do a little face lift on mine to make them just a tad cuter, if that's possible  ^_^  Beside got to thinking, whats a stove with out  pot's and pan's. :D  Remco see what you went and made me do. ^_^ Gary

post-264-0-50307500-1424494316_thumb.jpg

post-264-0-93166700-1424494330_thumb.jpg

Edited by garyshipwright

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...