Piet Posted June 1, 2017 #811 Posted June 1, 2017 Great job JesseLee! That tie-down hook surely is tiny, well done. Like the pics of your tiller rigging, it shows everything clearly. Cheers, Salty Sea Dog, JesseLee, Elijah and 3 others 6 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
JesseLee Posted June 21, 2017 Author #812 Posted June 21, 2017 When fitting the stern davits they didn't fit as good as they should. found that I needed to add a strip under them made them sit at the right height much better. I didn't feel the pegs beneath the kit supplied cleats were deep enough to hold well when rigging is pulling on them so I snipped them off, drilled them out and glued wire pins in that will sit deeper and grab the wood better. Stern davits and cleats on and painted. Jesse Beef Wellington, Dubz, CDW and 20 others 23 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
JesseLee Posted June 21, 2017 Author #813 Posted June 21, 2017 Shaped and added timberheads. Used a strip of paper to space them out evenly. Jesse KennyH78, Ryland Craze, BETAQDAVE and 26 others 29 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
kscadman Posted June 21, 2017 #814 Posted June 21, 2017 Very nice work Jesse. I enjoy seeing the detail you are putting into your Syren. Where did you find the information on tying down the binnacle? mtaylor, CaptainSteve, Elijah and 5 others 8 Quote Current Build - U.S. Syren 2nd Build - HMS Bounty Launch When organizing your thoughts, never use the Dewey Decimal system.
cog Posted June 21, 2017 #815 Posted June 21, 2017 And more very crisp detail. You are moving along quickly, Jesse. I especially like the way made the cleats and how sharp they turned out. Elijah, CaptainSteve, Canute and 5 others 8 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ...
JesseLee Posted June 21, 2017 Author #816 Posted June 21, 2017 Hello Richard, from your post I discovered your Syren and will be following it. I saw someone else tie the binnacle on their build log. I checked it out doing Google searches and found it was commonly done so I added it to mine for some extra detail. Jesse BETAQDAVE, cog, Elijah and 5 others 8 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
popeye the sailor Posted June 21, 2017 #817 Posted June 21, 2017 very nice Knight heads Jesse I see the cut out you did at the stem.......bow spirit coming soon! your moving right along.......glad to see your feeling better Piet, Canute, Salty Sea Dog and 4 others 7 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
kscadman Posted June 21, 2017 #818 Posted June 21, 2017 Thank you Jesse. It's my first build so I have a lot to learn. I may try tying down my pinnacle mtaylor, Salty Sea Dog, Canute and 3 others 6 Quote Current Build - U.S. Syren 2nd Build - HMS Bounty Launch When organizing your thoughts, never use the Dewey Decimal system.
JesseLee Posted June 21, 2017 Author #819 Posted June 21, 2017 Just when I started to get some momentum going my father-in-law passed away last night. Everything will be on hold for a little while. Jesse Piet 1 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
Jack12477 Posted June 21, 2017 #820 Posted June 21, 2017 My condolences to your wife, yourself and your family, Jesse. CaptainSteve, Elijah, Ryland Craze and 5 others 8 Quote Jack "No one is as smart as all of us" - Is ón cheann a thagann an cheird The craft comes from the head --------------------------------------------- Current build: US Constellation Non-ship builds: USCG UH-65A Dolphin M16 Multi-gun motor carriage diorama M4A3 Sherman Tanks dioramas 1936-1939 Mercedes Benz 540K 1934 Rolls-Royce Phantom II JSDF Light Armor Vehicle Figures: The Last Bridge: Raider Reaper Edge of Universe: Ianis The Last Bridge: Vadim with cart Completed build log(s): 18th Century Longboat , Marie Jeanne, Willie L Bennett 1888 50 ft Gaff-rigged Ice Yacht Scratch Build The Sullivans (DD 537) Liberty Ship SS John W Brown USS England (DE 635), Artesania Latina Titanic Lifeboat Gallery: Swift , Armed Virginia Sloop, Santisima Trinidad Captain's Launch , 18th Century Longboat , Marie Jeanne Other: Rhinebeck Aerodrome Tour
kscadman Posted June 21, 2017 #821 Posted June 21, 2017 I'm sorry to hear it. My condolences. JesseLee, Canute, CaptainSteve and 4 others 7 Quote Current Build - U.S. Syren 2nd Build - HMS Bounty Launch When organizing your thoughts, never use the Dewey Decimal system.
jablackwell Posted June 21, 2017 #822 Posted June 21, 2017 Sincere condolences to you, your spouse and family. ~john CaptainSteve, Piet, Elijah and 4 others 7 Quote Builds: U.S. Brig Syren - 1803 - Model Shipways - First PoB Build Sopwith Camel F.1 - 1916 - Model Airways - Not a Ship!, Completed Kate Cory - 1856 - Model Shipways - Second Build, completed Sultana - 1767 - Model Shipways - First shipbuild, completed
HIPEXEC Posted June 21, 2017 #823 Posted June 21, 2017 Sorry to hear about your loss. cog, Salty Sea Dog, Elijah and 4 others 7 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
Tigersteve Posted June 21, 2017 #824 Posted June 21, 2017 So sorry. Steve CaptainSteve, Piet, cog and 4 others 7 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
reklein Posted June 21, 2017 #825 Posted June 21, 2017 Aww Shucks Jesse. We're sorry . Tough break. cog, Salty Sea Dog, JesseLee and 4 others 7 Quote Bill, in Idaho Completed Mamoli Halifax and Billings Viking ship in 2015 Next Model Shipways Syren
ccoyle Posted June 21, 2017 #826 Posted June 21, 2017 Sorry to hear that, Jesse. Canute, cog, Elijah and 4 others 7 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, DS Børøysund
Salty Sea Dog Posted June 22, 2017 #827 Posted June 22, 2017 So sorry to hear that news Jesse. Sending thoughts of strength your way so you can be the rock your family can lean on. Canute, Elijah, CaptainSteve and 3 others 6 Quote -Buck Current build: AL Morgan's Whaleboat (1st build) Kits in the ships locker: I cannot confirm nor deny that there may be a few kits in there...
alde Posted June 22, 2017 #828 Posted June 22, 2017 Sorry for your loss Jessy. My thoughts and prayers are with you and your family. cog, CaptainSteve, Salty Sea Dog and 5 others 8 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
Canute Posted June 22, 2017 #829 Posted June 22, 2017 Jesse, my heartfelt condolences to you and your family. Piet, Elijah, Salty Sea Dog and 4 others 7 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
popeye the sailor Posted June 22, 2017 #830 Posted June 22, 2017 sorry to hear Jesse.....condolences to you and your family cog, JesseLee, Canute and 3 others 6 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
Piet Posted June 25, 2017 #831 Posted June 25, 2017 So sorry hearing about the sad tidings. Our condolences and prayers to you and the family. Cheers, Salty Sea Dog, CaptainSteve, cog and 2 others 5 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
exwafoo Posted June 25, 2017 #832 Posted June 25, 2017 Sorry to hear this Jesse; my condolences to you all Best Alan Piet, Salty Sea Dog, cog and 4 others 7 Quote
mtaylor Posted June 25, 2017 #833 Posted June 25, 2017 My condolences, Jesse. It's tough to lose someone like that especially when you've been ill also. Canute, Piet, CaptainSteve and 6 others 9 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
ca.shipwright Posted June 25, 2017 #834 Posted June 25, 2017 Jesse, My condolences. Michael CaptainSteve, Canute, JesseLee and 4 others 7 Quote ca.shipwright Michael Zemmel Midlothian. VA http://modelshipworld.com/index.php/topic/11562-hmb-endeavour-by-cashipwright-corel-160/ http://modelshipworld.com/index.php/topic/15329-hms-victory-by-cashipwright-panart-art-738-1:78/ "Buy all your toys before you retire"
Chasseur Posted June 26, 2017 #835 Posted June 26, 2017 My condolences Jesse, my Father in Law passed late February this year. Really tough on my wife so I can relate to you. My the good Lord give you a peace that passes all understanding and richly bless you and yours ... Jeff Elijah, Salty Sea Dog, mtaylor and 6 others 9 Quote A mighty fortress is our God a bulwark never failing!
JesseLee Posted July 7, 2017 Author #836 Posted July 7, 2017 Many things have kept me from my building. Fighting my illness then my father-in-laws passed away. We got invited to the coast for a few days and jumped at the chance. I really wanted to visit the Maritime Museum while there but others weren't as interested as I was and it didn't happen. A little disappointed. We got back and we had a major problem with the air conditioning for the 4th time this year. Hopefully everything will get somewhat back to normal now. I have been squeezing in a few min. here and there over a while on the build waiting for things to allow me to start posting again. Trying to remember to take pictures but half the time forgetting to for part of the steps. Jumping around a bit from the order of the instructions. Constructing the longboat. Glued the pre-cut lifts together per instructions (forgot to take pics of some of the steps. Shaping these boats just right has always been a problem for me. i made templates for the shape changes from the instruction sheets. to guide me. Sanding it down to the proper thinness didn't work out well. I took off too much material in the front and didn't get the shape right in the rudder area. Didn't want to start all over so I built up and puttied areas too thin, did some other re-shaping and patch up work. This didn't look very well and even though the lower areas would be painted on the outside it wouldn't have that planked look so I re-planked it inside and out to hide all the flaws. Using scrap pieces I used darker strips where it will be hidden by the white paint later. Jesse BETAQDAVE, ccoyle, CaptainSteve and 17 others 20 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
cog Posted July 7, 2017 #837 Posted July 7, 2017 Very impressive Jesse. I wouldn't be able to duplicate that even if I had to! Marvelous Elijah, BETAQDAVE, Canute and 2 others 5 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ...
SGraham Posted July 7, 2017 #838 Posted July 7, 2017 Great longboat, Jesse! Steve Canute, Salty Sea Dog, Piet and 3 others 6 Quote completed models: Shenandoah (Corel) waiting on the shelf: La Sirene (Corel) Half Moon (Corel) Puritan (Mamoli) Patsy (derisively): "It's only a model." Arthur: "Sshhh."
GaryKap Posted July 8, 2017 #839 Posted July 8, 2017 Hi Jesse - Nicely done, so far. The frames, floor boards, thwarts, and oarlocks etc, will really make the ship's boat stunning. I do have a recommendation for you. The instructions on page 74 tell you "With these details completed the boat can be glued on top of the gallows bits". I waited until after I had completed the running rigging to do this, and was glad that I did. I believe the boat on the gallows bits would really get in the way and make it more difficult to belay many of the lines during rigging. But as always, there is more than one "right way" to build a model ship. I'm glad to see you back in the shipyard. <<Gary>> Elijah, popeye the sailor, Canute and 6 others 9 Quote current build: SYREN nearly done: Fair American, Benjamin W. Latham future builds: Emma C. Berry completed builds: Rattlesnake, Newsboy, Sultana
Gahm Posted July 10, 2017 #840 Posted July 10, 2017 That boat is really coming together very nicely! The planking makes a big difference! Thomas Heronguy, popeye the sailor, Canute and 5 others 8 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.