Jump to content

Recommended Posts

Posted

This will be my version of Chuck's Cheerful. In addition to Chuck's prototype build log, there are already a couple of other logs started, and I'm sure there will be many more. It should be fun to work along with the others.

 

While waiting for the lantern parts that I needed to complete Essex, I decided to jump the gun and begin Cheerful. Since I lack power tools, and am reluctant to cut all of the framing by hand, I chose to use Chuck's laser cut bulkhead and former set. They are as near to perfect as you can get. The ply is uniform and the fit is precise. It was a simple matter to assemble the structure. Being a creature of habit, I added bracing at the bulkhead-former joints, as I've always done. Chuck didn't do this, and I'm sure that it wasn't necessary.

 

Before adding the bulkheads, but after adding the rabbet strip, I assembled and added the boxwood stem and keel.

 

I will be doing the hull planking and fixtures and furniture in boxwood and the decking in holly. I obtained the boxwood from Crown Timberyard, and it looks great. I chose not to get the offered package, because it is entirely composed of wood sheets from which the strips must be cut. Once again, my lack of tools caused me to get the wood mostly in milled strips, with some sheets.

 

I'm now starting to fair the hull.

 

Bob

post-186-0-47466400-1434200910_thumb.jpg

post-186-0-17313500-1434200936_thumb.jpg

post-186-0-05218500-1434200963_thumb.jpg

Posted

Great start...as always dont hesitate to ask me any questions.    :)   Knowing how fast you work you should be catching up to me in no time at all.

 

Chuck

Posted

Another Bob 'rafine' log.  Great.  I will follow along.

Best of luck.

Ken

 

NO PIRACY 4 ME! (SUPPORTING CHUCKS' IDEA)

 

Current Build:  

Washington 1776 Galley

Completed Builds:

Pilot Boat Mary  (from Completed Gallery) (from MSW Build)

Continental Boat Providence   (from Completed Gallery)  (from MSW Build)

Continental Ship Independence  (from Completed Gallery)  (from MSW Build)

Rattlesnake   (from Completed Gallery)  (from MSW Build)

Armed Virginia Sloop  (from Completed Gallery)

Fair American (from Completed Gallery)  (from MSW Build Log)

 

MemberShip Model Society of New Jersey

                  Nautical Research Guild

Posted

Hi Bob,

 

Great to see that you have started on your Cheerful. You sure don't let any grass grow under your feet!

 

I'm looking forward to following along with you and eventually building too. :) 

 

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Posted

Excited to start following this log from the start!

 

Mercdaddy

 

Past Builds: Corel's Victory, Mamoli's Friesland, Mantua's San Felipe, Model Shipways USS Constitution

Current Project:  Model Shipways USS Syren

Future Project: USF ESSEX

Posted
Posted

Great to see your new log started Bob. I'll be following your progress with interest.

Posted

Hi Bob,

 

wish you fun and much pleasure in building this beautiful cutter....

I`m sure you shall enjoy it, and congratulate you to the keellaying sequence on your model shipyard

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Posted

This will be a future build for me as well Bob! Hope you don't mind if I pull up a stool. post-12186-0-77159000-1434230894.gif

GEORGE

 

MgrHa7Z.gif

 

Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn.

 

Member of the Nautical Research Guild

Posted

post-76-0-97128600-1434239147.gif

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Posted

Hi Bob.

This should keep you going for a few weeks :)

Very nice start to the build.

Your skill's will overcome the lack of Power tools. Just look back at your past builds...

Will be watching this build with interest.

 

Regards Antony.

Best advice ever given to me."If you don't know ..Just ask.

Completed Mayflower

Completed Fun build Tail boat Tailboat

Completed Build Chinese Junk Chinese Pirate Junk

Completed scratch built Korean Turtle ship 1/32 Turtle ship

Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia

On hold. Bounty Occre 1/45

Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section

Completed H.M.S. Victory X section by Coral. HMS Victory cross section

Completed The Black Pearl fun build Black Queen

Completed A large scale Victory cross section 1/36 Victory Cross Section

Posted

Hi Bob! I am looking forward to watching this build! Cheerful is a beautiful ship!

 

Thomas

Current Built:   Model Shipways  Syren  (US Brig 1803)

 

Last Built:        Anfora (kit bashed)  Ictineo II  (1st steam powered submarine 1864)

 

Posted

Making my way through the tedious, but necessary, early steps. I first rough faired the hull using various sanding sticks. Then I added the gunport framing, trying to be careful to maintain a smooth flowing line. Next, I cut the forward most ports in the filler pieces at the bow and faired the gun ports. Lastly, I "finished" fairing the hull. I expect to need some minor adjustments when I begin the hull planking.

 

Next up will be the stern framing.

 

Bob

post-186-0-59450500-1434795323_thumb.jpg

post-186-0-61912300-1434795356_thumb.jpg

post-186-0-80785800-1434795380_thumb.jpg

post-186-0-92229700-1434795412_thumb.jpg

post-186-0-81579400-1434795439_thumb.jpg

post-186-0-32850900-1434795468_thumb.jpg

post-186-0-15212200-1434795490_thumb.jpg

Posted

Very nice start Bob.

 

Careful you don't get caught speeding and get a ticket! ;)

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Posted

I'm continually impressed by your craftsmanship. 

It also seems to me that this is a well designed kit.  Must be a pleasure after the Essex.  (Although your Essex is an outstanding model.)

Ken

 

NO PIRACY 4 ME! (SUPPORTING CHUCKS' IDEA)

 

Current Build:  

Washington 1776 Galley

Completed Builds:

Pilot Boat Mary  (from Completed Gallery) (from MSW Build)

Continental Boat Providence   (from Completed Gallery)  (from MSW Build)

Continental Ship Independence  (from Completed Gallery)  (from MSW Build)

Rattlesnake   (from Completed Gallery)  (from MSW Build)

Armed Virginia Sloop  (from Completed Gallery)

Fair American (from Completed Gallery)  (from MSW Build Log)

 

MemberShip Model Society of New Jersey

                  Nautical Research Guild

Posted

Good work Bob,

 

clean, accurate, precise, as usual, a delight to see....

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...