KORTES Posted December 3, 2018 #1 Posted December 3, 2018 Greetings my honorable colleagues. Asking the admittance to “the Dutch club”🙂 I have found the drawing in the internet, scale 1:30. I’m planning on working with the pear tree and black hornbeam. I would be very grateful for the advices and constructive critics. For the moment the model has a certain level of readiness. I will download the report in the chronological order. I also wanted to say that English is not my native language and I would have to use the translator sometimes. Due to this the terminology and information could be mistranslated. In advance, my sincere apologies if this may happen. Respectfully yours. Mirabell61, Valeriy V, Baker and 16 others 19 Quote
ccoyle Posted December 3, 2018 #2 Posted December 3, 2018 You're in luck -- we have a number of Dutch members on this forum, and some of them are bound to be knowledgeable on this type of vessel. Cheers! FrankWouts, Piet, BETAQDAVE and 1 other 4 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, DS Børøysund
KORTES Posted December 3, 2018 Author #3 Posted December 3, 2018 The body is made of plywood frame, attached together on the board. The space between the frame was filled in with the aspen. hexnut, Seventynet, paulsutcliffe and 12 others 15 Quote
KORTES Posted December 3, 2018 Author #4 Posted December 3, 2018 Covering. The cover is made of 2 mm pear batten butt joint. I decided to start the cover from the keel. hexnut, paulsutcliffe, Piet and 11 others 14 Quote
KORTES Posted December 3, 2018 Author #5 Posted December 3, 2018 Only the first panel was set up easily, the rest had to be bent beforehand. yvesvidal, hexnut, mtaylor and 7 others 10 Quote
KORTES Posted December 3, 2018 Author #6 Posted December 3, 2018 Bended battens were attached on the edges to the frame with the superglue and fixed with stapler. Afterwards, under the steam, I bent them by the frame of the ship. The “Dutchmen” are very roundframed.🙂 paulsutcliffe, Mirabell61, druxey and 14 others 17 Quote
druxey Posted December 3, 2018 #7 Posted December 3, 2018 Ver nice planking on a tricky shaped hull! Mirabell61, hexnut, Keith Black and 2 others 5 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
KORTES Posted December 3, 2018 Author #8 Posted December 3, 2018 The final belt. dvm27, yvesvidal, Siggi52 and 28 others 31 Quote
KORTES Posted December 4, 2018 Author #9 Posted December 4, 2018 22 hours ago, druxey said: Ver nice planking on a tricky shaped hull! Thank you very much. druxey, mtaylor and Piet 3 Quote
KORTES Posted December 4, 2018 Author #10 Posted December 4, 2018 Rubbing strips. They were bent using the black hornbeam. I had to work on refining them afterwards. Landlubber Mike, mtaylor, BETAQDAVE and 13 others 16 Quote
Mirabell61 Posted December 4, 2018 #11 Posted December 4, 2018 Hi Kortes, beautiful build, nice and clean planking job. I like the way you tacked the planks down (next to the planks themselves), so there remain no holes in the planks, Thanks for sharing.... Nils BETAQDAVE, hexnut, Piet and 2 others 5 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
KORTES Posted December 4, 2018 Author #12 Posted December 4, 2018 Preparing for the nailing. Ondras71, Rik Buter, paulsutcliffe and 18 others 21 Quote
KORTES Posted December 4, 2018 Author #13 Posted December 4, 2018 16 minutes ago, Mirabell61 said: Hi Kortes, beautiful build, nice and clean planking job. I like the way you tacked the planks down (next to the planks themselves), so there remain no holes in the planks, Thanks for sharing.... Nils Hi Nils, always glad to help. Mirabell61, mtaylor, BETAQDAVE and 2 others 5 Quote
Baker Posted December 4, 2018 #14 Posted December 4, 2018 Beautifully made Kortes I can help you with the names in Dutch It is : Friesch boeierjacht Sperwer "Friesch" comes from "Friesland", a province in the northern part of the Netherlands "Boeier" is the type of ship that you make. "Sperwer" is the name of the ship (a bird, sparrow) paulsutcliffe, reklein, mtaylor and 3 others 6 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
michael mott Posted December 4, 2018 #15 Posted December 4, 2018 Lovely clean looking hull Kortes. Michael BETAQDAVE, Keith Black, mtaylor and 1 other 4 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
KORTES Posted December 4, 2018 Author #16 Posted December 4, 2018 4 hours ago, Backer said: Beautifully made Kortes I can help you with the names in Dutch It is : Friesch boeierjacht Sperwer "Friesch" comes from "Friesland", a province in the northern part of the Netherlands "Boeier" is the type of ship that you make. "Sperwer" is the name of the ship (a bird, sparrow) My greetings, Patrick, Thank you very much for your valuable refiniment, I would be very glad to benefit from your assistance! Only doesn't "Sperwer" mean hawk, not a sparrow? My best regards Piet, Baker and mtaylor 3 Quote
KORTES Posted December 4, 2018 Author #17 Posted December 4, 2018 1 hour ago, michael mott said: Lovely clean looking hull Kortes. Michael Dear Michael. I’m very touched by your attention to my work . Alexander. Piet and mtaylor 2 Quote
flying_dutchman2 Posted December 4, 2018 #18 Posted December 4, 2018 This boat has clean lines and you did an excellent job of planking her. Both the bluff bow and stern are an exercise on its own. I know this from building yachts and presently building a Boyer. You are correct, a sperwer is a type of hawk. Did you get the plans from het Friese Scheepvaart museum online or if not where? Marcus Piet, BETAQDAVE and mtaylor 3 Quote Current Built: Zeehaen 1639, Dutch Fluit from Dutch explorer Abel J. Tasman Unofficial motto of the VOC: "God is good, but trade is better" Many people believe that Captain J. Cook discovered Australia in 1770. They tend to forget that Dutch mariner Willem Janszoon landed on Australia’s northern coast in 1606. Cook never even sighted the coast of Western Australia).
KORTES Posted December 4, 2018 Author #19 Posted December 4, 2018 My greetings, Marcus, Unfortunately, in my disposal I have only two sheets of plans, which i found in internet. Also lots of photos of Dutch yachtsmen are a big help for me. Respectfully yours. mtaylor, BETAQDAVE and Piet 3 Quote
KORTES Posted December 4, 2018 Author #20 Posted December 4, 2018 Finished nailing. I haven’t finished refining them yet, because no matter how hard you try - there would be left marks on them, so I will finish all the refiniments before coating them with oil. hexnut, Siggi52, druxey and 11 others 14 Quote
KORTES Posted December 4, 2018 Author #21 Posted December 4, 2018 Have made a temporary holding frame for proceeding with working on the deck. mtaylor, druxey, Siggi52 and 8 others 11 Quote
KORTES Posted December 4, 2018 Author #22 Posted December 4, 2018 I have made certain pieces for constructing broadside. The piece for the breast, for the extra strength, was glued from several pieces, because I used it as a pattern for bending battens. Rudolf, Piet, tarbrush and 9 others 12 Quote
KORTES Posted December 4, 2018 Author #23 Posted December 4, 2018 The broadsides, in this particular case, were made from large battens. I will try making them again. I made a pattern, cut it and bent it under steam. BETAQDAVE, Mirabell61, aviaamator and 11 others 14 Quote
KORTES Posted December 5, 2018 Author #24 Posted December 5, 2018 Covering the deck. BETAQDAVE, druxey, yvesvidal and 9 others 12 Quote
KORTES Posted December 5, 2018 Author #25 Posted December 5, 2018 Is awaiting the nailing. Before the installation of the detent pins. Mirabell61, Baker, Katsumoto and 16 others 19 Quote
KORTES Posted December 6, 2018 Author #26 Posted December 6, 2018 I have installed the detent pins on the deck. EricWilliamMarshall, druxey, yvesvidal and 13 others 16 Quote
KORTES Posted December 6, 2018 Author #27 Posted December 6, 2018 In order to proceed with working on the deck, I decided to finish working on the cabin interior, because otherwise it would be hard to get to it. G.L., Rik Buter, Valeriy V and 16 others 19 Quote
KORTES Posted December 6, 2018 Author #28 Posted December 6, 2018 Соnstructed mastluik. BETAQDAVE, G.L., KeithAug and 21 others 24 Quote
druxey Posted December 6, 2018 #29 Posted December 6, 2018 Very neat! mtaylor, Keith Black, BETAQDAVE and 1 other 4 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
michael mott Posted December 6, 2018 #30 Posted December 6, 2018 beautifully executed. Michael mtaylor, BETAQDAVE and Piet 3 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.