KORTES Posted July 9, 2019 Author #241 Posted July 9, 2019 Now I understand the captain who loses the mast on the final stage of the regatta. Probably every modelist faces this kind of fail. archjofo, BETAQDAVE, billocrates and 6 others 8 1 Quote
druxey Posted July 9, 2019 #242 Posted July 9, 2019 Oh, no! Battle damage already? That's not good. I hope it's easily repaired. mtaylor and Keith Black 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
KORTES Posted July 9, 2019 Author #243 Posted July 9, 2019 Its good that I have made the topmast dismountable, just like on a real schooner. I haven't had any problems with the dismantlement. The knot has been disassembled. archjofo, GrandpaPhil, JOUFF and 18 others 21 Quote
Dowmer Posted July 10, 2019 #244 Posted July 10, 2019 What happened? Quote Able bodied seaman, subject to the requirements of the service. "I may very well sink, but I'm damned if I'll Strike!" JPJ My Pacific Northwest Discovery Series: On the slipways in the lumberyard Union, 1792 - 1:48 scale - POF Scratch build 18th Century Longboat - circa 1790 as used in the PNW fur trade - FINISHED Future Builds (Wish List) Columbia Redidiva, 1787 HM Armed Tender Chatham, 1788 HMS Discovery, 1789 Captain Vancouver Santiago, 1775 - Spanish Frigate of Explorer Bruno de Hezeta Lady Washington, 1787 - Original Sloop Rig
mtaylor Posted July 10, 2019 #245 Posted July 10, 2019 17 hours ago, KORTES said: Its good that I have made the topmast dismountable, just like on a real schooner. I haven't had any problems with the dismantlement. The knot has been disassembled. That was a very good thing on making and mounting the mast. I hope the repairs go well. J11 and Keith Black 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
amateur Posted July 10, 2019 #246 Posted July 10, 2019 Not a very nice thing to see.... It looks as if the glue failed between two parts. Hope your replacement will be a bit stronger. Jan mtaylor 1 Quote
BETAQDAVE Posted July 10, 2019 #247 Posted July 10, 2019 On 7/7/2019 at 1:58 PM, KORTES said: When I was working on the La Jacinthe, I was following the principle - all that I could make myself, was made by myself. As was shown by your ingenuity at making an ordinary clothes pin into a custom clamp to hold your blocks! Reminds me of my grandfather who, due to necessity during the depression, had to make many of his own tools for his woodworking projects. Keith Black, billocrates, mtaylor and 1 other 4 Quote Dave “You’ve just got to know your limitations” Dirty Harry Current Builds: Modified MS 1/8” scale Phantom, and modified plastic/wood hybrid of Aurora 1:87 scale whaling bark Wanderer. Past Builds: (Done & sold) 1/8” scale A.J. Fisher 2 mast schooner Challenge, 1/6” scale scratch built whaler Wanderer w/ plans & fittings from A.J. Fisher, and numerous plastic kits including 1/8” scale Revell U.S.S. Constitution (twice), Cutty Sark, and Mayflower. (Done & in dry dock) Modified 1/8” scale Revell U.S.S. Constitution w/ wooden deck and masting [too close encounter w/conc. floor in move] Hope to get to builds: MS 3/16” scale Pride of Baltimore II, MS 1/2” scale pinky schooner Glad Tidings, a scratch build 3/16” scale Phantom, and a scratch build 3/16" scale Denis Sullivan.
KORTES Posted July 10, 2019 Author #248 Posted July 10, 2019 17 hours ago, Dowmer said: What happened? My hand had accidentaly got caught on the assembled fore-tompast stay. The outrigger remained in place , but the topmast didn't.. mtaylor 1 Quote
KORTES Posted July 10, 2019 Author #249 Posted July 10, 2019 (edited) On 10.07.2019 at 08:45, amateur said: Not a very nice thing to see.... It looks as if the glue failed between two parts. Hope your replacement will be a bit stronger. Jan There was a small rounded cut in this palce, so that when painting the line dividing the colors was clearly difined. Edited July 12, 2019 by KORTES mtaylor 1 Quote
KORTES Posted July 10, 2019 Author #250 Posted July 10, 2019 I made a device for the axial drilling. I’ve managed to maintain a coaxial alignment. A pin is made from a nail. FriedClams, GrandpaPhil, JOUFF and 9 others 12 Quote
KORTES Posted July 10, 2019 Author #251 Posted July 10, 2019 After consideration, I decided to glue using PVA glue. For several reasons - cyanoacrylate glue, even gel, binds very fastly, and I was afraid that the pin will be fastened sooner than it enters fully, on its full depth. The second reason is that once the cyanoacrylate glue is binded is gets very fragile and the junction may crack even at a slight bend. PVA glue is more flexible even after drying, and if there are few gashes on the pin it will hold tightly and more so as the binding time is long enough it allows to put the piece right in place. There’s only one thing bothering me - how much time does it take to bind inside the wood? Perhaps it would be better if i heat up the place where the pin is set? My best regards. BETAQDAVE, FriedClams, G.L. and 8 others 11 Quote
KORTES Posted July 10, 2019 Author #252 Posted July 10, 2019 I have gone back to square one. Ondras71, dvm27, Keith Black and 21 others 24 Quote
John Cheevers Posted July 10, 2019 #253 Posted July 10, 2019 very elegant repair Keith Black, BETAQDAVE, druxey and 2 others 5 Quote John Member: Hampton Roads Ship Model Society Current Builds: Tugboat Dorothy Newport News Shipbuilding Hull #1 (complete) Iron Clad Monitor (complete) Sardine Carrier which I will Name Mary Ann (complete) Pilot Boat John H. Estill Newport News Shipbuilding Hull #12 (my avatar) Harbor tug Susan Moran Coast Guard 100' patrol boat
TOM G Posted July 11, 2019 #254 Posted July 11, 2019 Is this model going to a museum ? and on a other note, have you heard from Doris, the lady building that fantastic card model ship....... she has not posted anything since march............ i pray no miss fortune has come to her. mtaylor, aviaamator and Keith Black 3 Quote
ccoyle Posted July 11, 2019 #255 Posted July 11, 2019 16 minutes ago, TOM G said: have you heard from Doris, the lady building that fantastic card model ship She tends to check in intermittently. mtaylor, TOM G and Keith Black 3 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, DS Børøysund
mtaylor Posted July 12, 2019 #256 Posted July 12, 2019 Beautiful recovery, Kortes. Looks great. FriedClams, Keith Black and John Cheevers 3 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
KORTES Posted July 15, 2019 Author #258 Posted July 15, 2019 While the topmast was drying out, I made a cat-block. piter56, Captain Poison, oneslim and 22 others 24 1 Quote
G.L. Posted July 15, 2019 #259 Posted July 15, 2019 Kortes, Your blocks are impeccable. mtaylor, billocrates, FriedClams and 2 others 5 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
Dowmer Posted July 16, 2019 #260 Posted July 16, 2019 Beautiful work. What kind of wood do you use for the blocks? mtaylor, billocrates, mcpwilk and 1 other 4 Quote Able bodied seaman, subject to the requirements of the service. "I may very well sink, but I'm damned if I'll Strike!" JPJ My Pacific Northwest Discovery Series: On the slipways in the lumberyard Union, 1792 - 1:48 scale - POF Scratch build 18th Century Longboat - circa 1790 as used in the PNW fur trade - FINISHED Future Builds (Wish List) Columbia Redidiva, 1787 HM Armed Tender Chatham, 1788 HMS Discovery, 1789 Captain Vancouver Santiago, 1775 - Spanish Frigate of Explorer Bruno de Hezeta Lady Washington, 1787 - Original Sloop Rig
KORTES Posted July 17, 2019 Author #261 Posted July 17, 2019 (edited) Thank you very much. Pear blocks. Edited July 17, 2019 by KORTES Dowmer, Keith Black and mtaylor 3 Quote
FriedClams Posted July 21, 2019 #262 Posted July 21, 2019 As always, your modeling is as close to perfect as it gets. Terrific work on the blocks Alexander. Gary mtaylor and Keith Black 2 Quote Current Build Pelican Eastern-Rig Dragger Completed Scratch Builds Rangeley Guide Boat New England Stonington Dragger 1940 Auto Repair Shop Mack FK Shadowbox
KORTES Posted July 22, 2019 Author #263 Posted July 22, 2019 Thank you very much, Gary. FriedClams and mtaylor 2 Quote
KORTES Posted July 22, 2019 Author #264 Posted July 22, 2019 (edited) While working on the installation of riggings, I made the flag and pennant. Taking my wife’s advice I bought a rayon of three different colors, instead of using the dye, luckily it’s not the British flag, so I glued the rayons together, just like the sails. I made it in two variations. Edited July 22, 2019 by KORTES FriedClams, G.L., yvesvidal and 19 others 22 Quote
KORTES Posted July 28, 2019 Author #265 Posted July 28, 2019 I have made a stand. I would like to point out that it had to be done before installing the riggings and mast-and-sparts. Adjusting the profile of the stand with a finished model is very hard. Material - pear tree. JpR62, JOUFF, Keith Black and 5 others 8 Quote
KORTES Posted July 28, 2019 Author #266 Posted July 28, 2019 I have ink painted it and covered with 2 layers of tung oil. bruce d, FriedClams, mtaylor and 9 others 12 Quote
KORTES Posted July 28, 2019 Author #267 Posted July 28, 2019 It is time to change the building berth to the stand. Dowmer, Peta_V, Valeriy V and 21 others 24 Quote
paulsutcliffe Posted July 28, 2019 #268 Posted July 28, 2019 Beautiful TOM G, mtaylor, billocrates and 3 others 6 Quote The clerk of the cheque's yacht of sheerness Current build HMS Sirius (1797) 1:48 scratch POF from NMM plans HMS Winchelsea by chuck 1:48 Cutter cheerful by chuck 1:48 Previous builds- Elidir - Thames steam barge Cutty Sark-Billings boats Wasa - billings boats Among others 😁
KORTES Posted August 2, 2019 Author #269 Posted August 2, 2019 I have finished with the leading end on the deck. JpR62, davyboy, Keith Black and 15 others 17 1 Quote
G.L. Posted August 2, 2019 #270 Posted August 2, 2019 Fantastic details. billocrates and Keith Black 2 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.