Jump to content

L'Amarante 1749 by giampieroricci - FINISHED - 1:30 - French Corvette


Recommended Posts

Giampiero,

 

Brilliant work. An absolute pleasure to follow along.

 

Michael

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Thank you, friends!!

 

I started working at the Captain's cabin; I also wanted to try out the mattress.
For the body of the mattress I used a small piece of sponge for dishes coated with the thin cloth and sewing the edge.
This is just an attempt, I'll probably have to do it a few millimeters bigger
 
post-7696-0-62751900-1452361908_thumb.jpg
 
post-7696-0-30898000-1452361910_thumb.jpg
 
post-7696-0-92570800-1452361911_thumb.jpg
 
post-7696-0-10690700-1452361914_thumb.jpg
 
post-7696-0-47786700-1452361915_thumb.jpg
 
post-7696-0-06397800-1452361917_thumb.jpg
 
Link to comment
Share on other sites

Very nice result !I look forward to see it in the cabin.

Jean-Philippe (JP)

 

Current build: Syren , HMS Victory Cross Section, Essex

 

:dancetl6:Please visit and subscribe to my YouTube Channel

 

On Hold: Rattlesnake (Scratch built)
Completed:   Armed Virginia Sloop, Viking ship,  The Flyer, Pilot BoatKrabbenkutterMarie-JeanneSloup, The Smasher

Mayflower

Link to comment
Share on other sites

I went a bit 'forward in the construction of the Capitain's cabin, but first I had to prepare the bulkhead separating the boardroom by the bridge battery

post-7696-0-72707800-1452452905_thumb.jpg

 

post-7696-0-63131700-1452452907_thumb.jpg

 

post-7696-0-92708200-1452452909_thumb.jpg

 

post-7696-0-31010700-1452452912_thumb.jpg

 

 

 

The interior of the Capitain's cabin: this is the small wall of the bunk where will placed the mattress, with the drawer on the bottom

post-7696-0-89268800-1452452913_thumb.jpg

 

post-7696-0-45112100-1452452915_thumb.jpg

 

 

Macro

post-7696-0-80573300-1452452916_thumb.jpg

Link to comment
Share on other sites

Beautiful work on the Captain's bunk, Giampiero.  I like that drawer that actually opens.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Dirk,

 

Yes, as always your work is such a pleasure for the eyes (and brain-I'm learning a lot).

 

Michael

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

The drawings do not notice the hinges outside the doors, I presume, are recessed, so I've thought of an alternative system; I do not know if it can be appropriate, but it sure is effective: the pictures explain better than words:

post-7696-0-91849900-1452965159_thumb.jpg

 

post-7696-0-64788700-1452965158_thumb.jpg

 

post-7696-0-34735600-1452965157_thumb.jpg

 

post-7696-0-07907500-1452965156_thumb.jpg

 

post-7696-0-35745200-1452965154_thumb.jpg

 

post-7696-0-87809700-1452965152_thumb.jpg

 

post-7696-0-73361900-1452965151_thumb.jpg

 

 

 

The desk:

post-7696-0-54179800-1452965150_thumb.jpg

 

post-7696-0-21306700-1452965149_thumb.jpg

 

post-7696-0-27862300-1452965147_thumb.jpg

Link to comment
Share on other sites

I decided to change the system for opening doors by mounting the external hinges. Now the door opens fully:

post-7696-0-55433400-1453570192_thumb.jpg

 

post-7696-0-39084500-1453570189_thumb.jpg

 

 

I started the construction of the hanging cabinets. Everything is still temporarily resting, I have not glued nothing:

post-7696-0-31376600-1453570186_thumb.jpg

 

post-7696-0-27005100-1453570183_thumb.jpg

 

post-7696-0-40634300-1453570180_thumb.jpg

 

post-7696-0-82061800-1453570176_thumb.jpg

 

post-7696-0-93356900-1453570174_thumb.jpg

 

post-7696-0-71319600-1453570173_thumb.jpg

 

Link to comment
Share on other sites

What craftsmanship! !

Jean-Philippe (JP)

 

Current build: Syren , HMS Victory Cross Section, Essex

 

:dancetl6:Please visit and subscribe to my YouTube Channel

 

On Hold: Rattlesnake (Scratch built)
Completed:   Armed Virginia Sloop, Viking ship,  The Flyer, Pilot BoatKrabbenkutterMarie-JeanneSloup, The Smasher

Mayflower

Link to comment
Share on other sites

I just finished going through your log Giampi and find it very enlightening.  Fantastic workmanship and I think this is the first time I have heard of using scrapers on frames. 

David B

Link to comment
Share on other sites

This is fantastic work, Giampiero.  The working cabinet doors and drawers is impressive.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

  • 3 weeks later...

I completed the preparation of the Captain's cabin, with many difficulties. I have yet to finish the warehouse and then I can definitely fix

 

The door handles. Photos in super macro!

post-7696-0-37781600-1455733955_thumb.jpg

 

post-7696-0-32201700-1455733954_thumb.jpg

 

post-7696-0-79688400-1455733952_thumb.jpg

 

post-7696-0-47702900-1455733951_thumb.jpg

 

 

The bunk with the mattress view from the inside

post-7696-0-05049200-1455733950_thumb.jpg

 

post-7696-0-36053200-1455733948_thumb.jpg

 

post-7696-0-96568900-1455733946_thumb.jpg

 

post-7696-0-28037900-1455733945_thumb.jpg

 

post-7696-0-02251700-1455733943_thumb.jpg

 

post-7696-0-76717500-1455733940_thumb.jpg

 

Link to comment
Share on other sites

Your work continues to amaze and inspire me, Giampiero.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...