Jump to content

IJN Hatsuzakura by Landlubber Mike - FINISHED - Pit Road - 1/700 - PLASTIC - with FiveStar PE


Recommended Posts

Nicely done Mike. Especially the aft AA gun. I also think it is an improvement over the kit gun.

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Link to comment
Share on other sites

5 hours ago, cog said:

That AA gun is a hughe improvement, just like Lou wrote

Adding a Third note of approval  - looking Superb Mike,   when you get your eyesight back  can't wait to see what you build next.

 

OC.

Edited by Old Collingwood

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

Sorry the above should have said  note   - its ammended now.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

I had a little time last night and put together a few of the 25mm triple MGs.  These were built up using four PE pieces and I think I counted 16 folds, but weren't too bad.  Like the other guns, I think the PE gives a little more detail and the barrels at least are more in scale.  Under extreme magnification like in the pictures they don't look very crisp, but without any optical help, they actually look quite nice.

 

I only have to make four of these, and then can start putting together the single MGs.

 

IMG_0614.JPG.80382940b8444137ac3390d961ba814e.JPG

 

IMG_0616.JPG.ff31946abaef35a95e921f553165f0a8.JPG

 

IMG_0618.JPG.c244715b48b49756fbe198abbfea2875.JPG

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

holy moly Mike!  amazing work with such small parts!  I'd be daunted to try one.........:blink:

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

 

1 minute ago, popeye the sailor said:

holy moly Mike!  amazing work with such small parts!  I'd be daunted to try one.........:blink:

 

With your skills, you should definitely try it!  You have done a great job with the 1/72 scale planes, this is just a bit smaller :) 

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Add me to the list. I would be challenged to do those at 1/350th. Time to pat yourself on the back Mike. It's well earned. 

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Link to comment
Share on other sites

The only advantage youhave at this scale is the numbe of parts. Where at 1/350 you might have some 16 - 20 individual parts, you have but 4. However, the size would drive me nuts! Well done, not to say, very well done

Carl

"Desperate affairs require desperate measures." Lord Nelson
Search and you might find a log ...

 

Link to comment
Share on other sites

Stunning!! I didn’t know there was etched bits for such small scale and size! It seems insane, so my hat’s off to you. What is the basic tool kit for you work with PE? 

Link to comment
Share on other sites

5 hours ago, cog said:

The only advantage youhave at this scale is the numbe of parts. Where at 1/350 you might have some 16 - 20 individual parts, you have but 4. However, the size would drive me nuts! Well done, not to say, very well done

 

It is easier in some cases, but it's almost by necessity because the pieces are so small.  Beyond the folds, what is tricky is cutting them out of the fret.  You have to be careful to press straight down or you might cause serious bends to the rest of the piece.  For an example, here is a picture of the base unit of the triple MGs (part C4) - this wasn't so bad, but some of the others like the tower pieces which involved long thin brass, were extremely tricky.  Even then, I find i have to flatten or rework the piece to get back to the original shape once out of the fret.

 

IMG_0619.JPG.27e554b31395f7dab18d5d03357cbe5d.JPG

 

Here are the instructions for the various guns and rangefinder.  If you look at part C4, you can see what was involved - 14 folds!

 

IMG_0620.JPG.6fb6d643819b616722ec56d8f1ab104e.JPG

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

5 hours ago, EricWilliamMarshall said:

Stunning!! I didn’t know there was etched bits for such small scale and size! It seems insane, so my hat’s off to you. What is the basic tool kit for you work with PE? 

 

There is actually a huge aftermarket for 1/700 ships, probably at least as big as that for 1/350 thought the players are a bit different.  It's amazing what people are putting out in terms of sets.  You can get wooden decks, deck masks, resin-cast guns and other deck items, etc.  Sometimes the manufacturer has sets that are included in the kit or available separately, but generally, it seems that the more comprehensive sets are available from third parties - Five Star, Rainbow, Artist Hobby, Flyhawk, Shipyard Model Works etc.  For me, I've generally been seeing what's out there in terms of aftermarket and then buying the associated kit, rather than start with a kit and get the aftermarket.  You can, however, add generic detail sets for ships like carriers or seaplane tenders if you have a kit that doesn't have a dedicated PE set - places like Toms Model Works and White Ensign make a number of very good generic sets.  You can also buy various detail items a la carte if you want more detail for a particular item from places like Fine Molds, Rainbow, Ocean Hobby, etc.

 

People are also starting to put out resin sets which have limited PE, but the hull, guns, funnels, etc. are cast in resin.  The detail is amazing, and less to obviously remove from a fret, fold, glue, etc.  Take a look at Niko models - I just picked up a couple of their kits and was really impressed with what they are pulling off in resin at this scale.

 

I've mentioned this before, but what is great about 1/700 is the incredibly diverse range of subjects you can build that aren't available at 1/350 or bigger scales, especially things like auxiliary ships like oilers, seaplane and submarine tenders, minelayers, etc.  I personally find those workhorses a little more interesting than something bristling with guns.  

 

Sorry for the digression.  For tool kit:

 

-- Optivisor

 

-- Good tweezers are a must!  Get the finest tweezers you can get.  I have some Swiss ones that I picked up a while back that work nicely.  The general hobby ones you see will be too big, ooo imprecise, etc.  I sometimes use a self-locking one to hold a part, while using a standard tweezer to make folds.

 

-- Then you will need something to remove the pieces from the fret.  They have clipper type tools you can use, but I think they will be too big as 1/700.  I use a #10 X-acto type blade (the one that has a bigger profile and a curved cutting surface at the end.

 

-- Cut off set - to help see the piece and remove it from the fret, I find the black acetate and hold downs to be incredibly helpful.  You can get them from The Small Shop:  https://thesmallshop.com/collections/photo-etch-cut-off-sets

 

-- For folding, at 1/700 I can get away with mostly using tweezers, though sometimes I use Tamiya PE folding pliers (they come in two sizes) especially if I have to flatten out a piece that got bent on removal.  I also have a couple of "Hold and Fold" PE bending sets from The Small Shop:  https://thesmallshop.com/oollections/photo-etch-bending-tools  I haven't needed to use them yet, but they will come in handy when I get to larger scales.

 

-- Glue - I generally use medium CA that I apply via a pin.  You can use white glues too like Gator Glue, but I've found medium CA to be a little better dealing with the small parts in 1/700.  Thin sets way too fast to be able to adjust a piece, and white glues take too long (at least at 1/700).  I'll be using Gator Glue when I start my 1/350 kits.

 

-- Wax pencil - one other thing I found helpful at times is using one of those wax pencils to help you pick up tiny parts.  They have just enough adhesion to lift a part, but not too much that you have a hard time getting the part off.

 

 

 That's about it.  Not too complicated.

 

Edited by Landlubber Mike

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Mike, Are you cutting the frets on your cutting mat or something less likely to give. I've been working on a brass flatcar and cut the big pieces out on one of my cutting mats. Now, I have to cut out finer details, like brake levers. I've bent some of the large pieces in places as I've cut them out, but they're not too obvious and easily fixable. I'm dealing with HO (1/87) scale parts, so it's probably not as intense as dealing in 1/700 scale. Plenty of light and an Optivisor are definitely needed.

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

I don't cut them on the cutting mat, but use this black acetate set from The Small Shop:

 

https://thesmallshop.com/collections/photo-etch-cut-off-sets/products/sms016-photo-etch-cut-off-set-large-by-the-small-shop

 

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Just incredible what you are achieving Mike, hats off to you dealing with that insane PE at that scale, looks great though.  How do you fold the PE at this scale?

Cheers,
 
Jason


"Which it will be ready when it is ready!"
 
In the shipyard:

HMS Jason (c.1794: Artois Class 38 gun frigate)

Queen Anne Royal Barge (c.1700)

Finished:

HMS Snake (c.1797: Cruizer Class, ship rigged sloop)

Link to comment
Share on other sites

50 minutes ago, Beef Wellington said:

Just incredible what you are achieving Mike, hats off to you dealing with that insane PE at that scale, looks great though.  How do you fold the PE at this scale?

 

Thanks Jason!  I generally use very fine tweezers to do the folds, often times with the part being held by very fine reverse tweezers (not sure what they are called - the ones that start closed and when you squeeze them they open).  Sometimes I can hold a part in my left fingers and fold via tweezers.  

 

What's nice about the PE (at least in this Five Star set) is that the fold lines are already preset with very shallow grooves so you don't have to guess or exert much force to start the bend.  Amazing that they can pull that off in such scale.

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

2 hours ago, EricWilliamMarshall said:

Thanks ever so much for overview ; most useful! I think I have to take the plunge now!

 

Go for it!  Definitely post a log on here so that I'm not the only one in the insane asylum.

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Mike, that's what I thought you meant on the cutting surface. I'm looking for mine. I saw the box, but now it's missing in action. Along with my sprue cutting pliers and a scale ruler. I put them away some place safe and now....

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

Break them out!  Maybe us lunatics can do a group build project 🤔

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

I've been on a roll moving this project forward this week, so continued it again the last couple of nights.  I've added what I think I can in the middle of the ship, including single AA guns, rangefinders, on deck davits, railings, etc., as well as the anchors.  I've been debating whether to add the outer hull details like the steps for fear of knocking them off, but I think I'll take the chance to add them now rather than later and have to touch up the paint to cover glue marks.  

 

Once all that is on, I think I can paint and prime the ship.  Then I'll remove the masking, and add the remaining deck details.  For those details, I think I'm going to have to prime and paint them on the fret, and then assemble and add to the ship.  Given portions of the deck are linoleum, I can't just add all those details now as many sit on the linoleum portions.

 

Here are some pictures of where things stand.  My apologies for the quality - it's a little hard to take them using my iPhone at such high magnification, though frankly, I'm impressed that the pictures even came out this well.  Thanks for looking in!

 

IMG_0621.JPG.c63fd9691ada211ca7ce5c9ad6a98217.JPG

 

IMG_0622.JPG.e1efc440498db884842b5143b9ac6886.JPG

 

IMG_0623.JPG.87d48f7e617863bc619fd210d94f52bf.JPG

 

IMG_0624.JPG.7ee5fd0ce747354c207b55eb333c0d35.JPG

 

IMG_0625.JPG.4ca9fe5a301918ff917a66444205cf30.JPG

 

IMG_0626.JPG.883358939334194233a9d938a1c15ee1.JPG

 

IMG_0627.JPG.a9e0fb912076b36f2b68eb9b8219d876.JPG

 

IMG_0628.JPG.b21f70c166e176fcbecbd7838049239a.JPG

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

That's a lot of gold showing Mike. You have been a busy little beaver. Looking forward to seeing how it starts looking when you add the other colors!

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Link to comment
Share on other sites

I think when you're done with this model, you'll be qualified for micro-surgery, Mike.   My eyes and mind cross every time I see this log.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

On 1/14/2021 at 4:21 PM, Canute said:

Mike, Are you cutting the frets on your cutting mat or something less likely to give. I've been working on a brass flatcar and cut the big pieces out on one of my cutting mats. Now, I have to cut out finer details, like brake levers. I've bent some of the large pieces in places as I've cut them out, but they're not too obvious and easily fixable. I'm dealing with HO (1/87) scale parts, so it's probably not as intense as dealing in 1/700 scale. Plenty of light and an Optivisor are definitely needed.

Ken - Mike, I have seen  ceramic tile recomended to cut the PE from the frets.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

While waiting for other models to dry in the spray booth, I have been plugging along on this one.  Lots added - front post, the larger davits, a few more single AA guns, depth charge rack, etc.  I think this is about all I can do at this stage before painting everything, and then separately adding the remaining details - which there are still a bunch!  I thought a destroyer would be a good entry to the 1/700 world, but there's actually tons of details peppered throughout what is a smaller ship.  Some fun comparison pictures...

 

Comparison of kit depth charge rack (left) with PE:

 

IMG_0637.JPG.b42700ebf83227850c52b134c217f40a.JPG

 

Davits - these are created with two pieces, the top part which you fold two halves together to build up the thickness, and then the base. The base is only maybe 3-4mm long, and you have to fold the two ends in to make it a U shape.  Then you take the top part and insert it through a very tiny hole in the top of the base, and have it settle into an even smaller hole at the bottom of the base.  I had the dreaded "ping" off the tweezers on one of them, but fortunately I was able to find it.  I don't know what I would have done if I lost it, but all is good.

 

IMG_0639.JPG.4ee15860a15b297dc28e6d0562797bc2.JPG

 

I almost forgot that the front funnel had a long pipe that attached along the port side, so scratch built one since the kit one was way out of scale now that I added the PE rings.  I think I did this in 0.30mm brass wire - probably a tad underscale, maybe I should have gone with 0.50mm.  I'm worried about trying to remove it and ripping out some of the other brass on the funnel, so I'm just going to leave it.  I am wondering though about the kit radar on the top of the bridge - seems a bit overscale.  I might have a resin replacement I can use from FineMolds, will have to check the stash.  It's probably not too bad, and will look smaller once painted and no longer stark white.

 

IMG_0642.JPG.1459732687608234427ef98d1603a9f1.JPG

 

Some other pictures.  I have to remind myself that these are taken at extreme magnification because they look a bit disappointing in the pictures, but to the normal eye, they look fine.

 

IMG_0643.JPG.6cc9e1e22a8b095706cf9c50b64063a3.JPG

 

IMG_0645.JPG.2e511649ce30365d4c37c538a131bc3e.JPG

 

IMG_0640.JPG.c6956355d1e8e2911a5ea5fbb81cbe1f.JPG

 

IMG_0641.JPG.0e65e62072007d7e86cff0b906905e11.JPG

 

IMG_0644.JPG.cb105bec4f1cf24d67438b404095141f.JPG

 

I think at this stage I'll prime and paint, then add the remaining details which include another 10 AA guns, the rails on the deck to cart munitions, small boats, rails, a bunch of things that look like crates, etc.  Then there are some optional details like ammo boxes.  Thanks for looking!

Edited by Landlubber Mike

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Impressive progress Mike!

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Link to comment
Share on other sites

Have you got a chrysanthemum for the tip of the bow? IJN ships had them for the Emperor.

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...