Jump to content

US Brig Syren by Gahm - Model Shipways


Recommended Posts

Thank you so much Carl and Dirk! And thanks for all the likes.

- Carl, you are right, it takes a bit of patience to get all these hammocks done. But it is good practice for other repetitive tasks such as the ratlines :)

- Dirk, complaints need to go to Jesse . . . he started this :D

 

Thomas

 

Current Built:   Model Shipways  Syren  (US Brig 1803)

 

Last Built:        Anfora (kit bashed)  Ictineo II  (1st steam powered submarine 1864)

 

Link to comment
Share on other sites

  • 4 weeks later...
  • 2 months later...

After a break of about 2 months enforced by several unexpected events I finally found some time and built the 3 remaining hammock nettings. I already described that the ‘unframed’ sides of the nettings were attached via black 100wt silk thread and CA glue to the rope which spans from the boarding panel to the last hammock crane. I neglected to say that it was not quite easy to get a clean finish there. At least I was not able to cut off the net along the rope in a satisfactory manner using fine scissors (img 1, left side). Part of the net was always protruding beyond the rope. I finally ‘stiffened’ the protruding ends with CA glue and removed them via a rotary tool with a fine diamond burr (img 1, right side). After a little touch up with black paint the result turned out acceptable (img 2, 3).

 

Thomas

 

IMG_01.thumb.JPG.c45d9c5855c81d6be9b7c2e2874ebb24.JPG

Image 1

 

IMG_02.thumb.JPG.63508f07a42afecc58731c1f771edafb.JPG

Image 2

 

IMG_03.thumb.JPG.a3cd91d580ae40faf4dbf7d6eb117945.JPG

Image 3

 

 

Current Built:   Model Shipways  Syren  (US Brig 1803)

 

Last Built:        Anfora (kit bashed)  Ictineo II  (1st steam powered submarine 1864)

 

Link to comment
Share on other sites

Thomas,

 

Nice belated update - You hammocks are, as well as everything else, so beautifully scaled. Brilliant work.

 

Regards, 

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Greetings Gahm, I just caught up on your excellent log. Your hammocks are really outstanding as is the description and pictures of the methodology you used to create them. Having seven ties on the hammocks was the detail icing on the cake.

Thanks for sharing.

Harley

Cheers, Harley<p 

Under Construction:    USS Yorktown CV-5 1/200 by Trumpeter                                

Completed:              USS Curtis Wilbur DDG-54 1/200 by ILoveKit

                                USS Atlanta CL-51 1/350 by Very Fire 

                                Liberty Ship John W. Brown 1/350 by Trumpeter

                                HMS Spiraea K-08 1/350 

                                 USS Arizona BB-39 1/200 by Trumpeter/Mk1 Design

                                 HMS Sir Gareth 1/350 by Starling Models

                                 USS Missouri BB-63 1945 1/350 by Joy-Yard, 9/11/21

                                 USS Indianapolis CA-35 1945 1/350 by Trumpeter

                                 USS Kidd DD-661, 1945, 1/350, on The Sullivans kit by Trumpeter

                                 USS Alaska CB-1, 1/350, Hobby Boss, Circa 2/1945

                                 US Brig Syren 1/64 Model Shipways, Wood 

Started, On Hold:  Frigate Confederacy 1/64 Model Shipways, Wood

Link to comment
Share on other sites

  • 1 month later...

Hammocks are finally finished (see images below)!

Thomas

 

IMG_1.thumb.JPG.42e54dc86e09cebbf55ccb18486a3af2.JPG

Image 1

 

IMG_2.thumb.JPG.cb2738ff40b329a1d01c02ce6de0cd7f.JPG

Image 2

 

IMG_3.thumb.JPG.9d97b29c920079754b18323a1c233b92.JPG

Image 3

 

IMG_4.thumb.JPG.32af880c26488b287f631d25a4dedf3c.JPG

Image 4

 

 

Current Built:   Model Shipways  Syren  (US Brig 1803)

 

Last Built:        Anfora (kit bashed)  Ictineo II  (1st steam powered submarine 1864)

 

Link to comment
Share on other sites

Jason, Jim, Carl, B.E., thank you so much for your kind words! And thanks for all the 'likes'! After weeks of building nothing else but hammocks I am really happy to have them finished, and encouraged to get this kind of feedback! It is much appreciated.

 

Thomas

Current Built:   Model Shipways  Syren  (US Brig 1803)

 

Last Built:        Anfora (kit bashed)  Ictineo II  (1st steam powered submarine 1864)

 

Link to comment
Share on other sites

Thank you, Dirk! Where the color is concerned the hammocks look whiter in the images than they really are. I chose an eggshell colored fabric, the silkspan is kind of yellowish too, and the white glue (in spite of its name 😉) did not really whiten up the end result either. I know, Mondfeld states that the hammocks should be brownish because of all the dirt. But then he also describes the making of a hammock as simply 'folding a little roll of fabric . . . ' ☺️

 

Thomas 

Current Built:   Model Shipways  Syren  (US Brig 1803)

 

Last Built:        Anfora (kit bashed)  Ictineo II  (1st steam powered submarine 1864)

 

Link to comment
Share on other sites

  • 3 months later...

Wow -amazing work !  - look forward to following along.

Edited by gerty

Current Build: Willie L. Bennett - Model Shipways

 

Future Interests:  Friendship Sloop - BlueJacket Ship Crafters

                            Cape Cod Catboat - BlueJacket Ship Crafters 

                       

Link to comment
Share on other sites

  • 5 months later...

I spent some time building a jolly boat prototype for the Syren. I wanted to find out what it would look like to hang a jolly boat from her rear davits, and also to experiment with a few techniques needed for some of the boat details (also applicable to the long boat construction). To build the jolly boat I bought the Master Korabel kit. This is a kit for a highly detailed jolly boat, which additionally is very similar to the jolly boat plans shown in the ‘Anatomy of the Ship – Frigate Diana’ book. However, the scale of the kit is 1:72 and therefore not directly usable. As the kit does not come with a useful plan I put the 3 sheets of laser cut pear- and ply-wood on a copy machine, increased the copy by a factor 1.25x to get to the correct boat dimensions and then built the boat according to this ‘plan’. The different boat building stages are shown in images 1 – 7. Images 8 and 9 present the finished result. Image 10 shows a direct comparison between the jolly boat built from the kit at scale 1:72 based on the kit provided laser cut parts and the scratch built ‘enlarged version’ potentially suitable as Syren jolly boat.

 

Thomas

 

img_1.thumb.JPG.a804609ac21a6264f3c335242fe25e32.JPG

Image 1

 

img_2.thumb.JPG.f6f0b21ccc34949da376057e8c04666f.JPG

Image 2

 

 

img_3.JPG.d33b89a3c6b5a8d63326d3db1ad79037.JPG

Image 3

 

img_4.jpg.f821c1bfa252afe5c408ec91079dac88.jpg

Image 4

 

img_5.JPG.3f7fa53ecb9bbaa672037bc77b43b07d.JPG

Image 5

 

img_6.thumb.JPG.2421a8f370b7cacba3fc108725189cd6.JPG

Image 6

 

Img_7.thumb.jpg.6a4650cb311031c53805e9648f500f55.jpg

Image 7

 

img_8.thumb.jpg.842a58a2cc9ba719acafe152506ed59e.jpg

Image 8

 

1184358350_Img_9.thumb.jpg.9ea3978c19ce0ad48f2cc0df9f9eb6e6.jpg

Image 9

 

Img_10.thumb.jpg.69eefcc39144329a8dab84853e02eb5d.jpg

Image 10

 

 

Edited by Gahm

Current Built:   Model Shipways  Syren  (US Brig 1803)

 

Last Built:        Anfora (kit bashed)  Ictineo II  (1st steam powered submarine 1864)

 

Link to comment
Share on other sites

Wonderful job. This jolly boat is a beauty !

Jean-Paul

 

'You are not carving a bear with a chain saw here folks',

Chuck Passaro, ´Queen Anne Style Barge´ manual of instructions

 

Current builds :

 

Finished build :

 

Next on list :

  • HMS Winchelsea 1764 - Syren Ship Model - 1:48
Link to comment
Share on other sites

Those are just stunning Thomas, well done, such precise work at a small scale.

Cheers,
 
Jason


"Which it will be ready when it is ready!"
 
In the shipyard:

HMS Jason (c.1794: Artois Class 38 gun frigate)

Queen Anne Royal Barge (c.1700)

Finished:

HMS Snake (c.1797: Cruizer Class, ship rigged sloop)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...