Jump to content
NRG Photographic Model Ship Competition - All eligible to enter - Reduced memberhsip fee - JULY 31 ENTRY DEADLINE ×

mtaylor

Moderators
 View Profile  See their activity

  • Posts

    26,270

  • Joined

  • Last visited

 Content Type 

Everything posted by mtaylor

  1. mtaylor
    I'm hoping for opinions.. and fear not, I can take critique... I've sanded and shaped quite a bit on the last cant frame and the transoms. Is this better? Does it need more work? I removed 5 planks, the 3 now installed are only tacked into place and will need beveling, etc. But I wanted to get an opinion. I'm thinking they look 100% better, but not sure how "accurate" it is. Do I need more work on this area? I managed to sort out what my references show (unfortunately, no planking expansion but that's to be expected) for plank that's now wrapped around a bit. Which what the references seem to show. Thanks in advance.
  2. mtaylor
    Richard, Best information is that the company is gone. The owners were killed in a car wreck and I guess the kids decided to close the business rather than run it themselves. It was basically a two-person shop that catered to the RR hobby.
  3. mtaylor
    Looking sweet Popeye. I'm glad you figured out that fascia problem without going nuts.
  4. mtaylor
    Mick, Looks super nice. Re-check your breeching line length. The look short to my eye. The gun should be able to recoil back so that the muzzle is inside the gunport.
  5. mtaylor
    Just.... wow!!!! I go along with Danny.. only one of you? !!!!! Your model room is a museum.. better than some museums I've seen.
  6. mtaylor
    The catheads look fantastic Nenad. Impressive work, my friend. Do stay cool... I think you're right about the seventh circle of hell.
  7. mtaylor
    Beautiful work, Igor. The stopper just a wonderful touch.
  8. mtaylor
    Nice kevels, Frank. I hate to sound like a party pooper but the pinrails seem awful thick. Take some appropriate size line and fake a belaying and make sure it grabs and holds the bottom of the pin. Maybe it's just angle of the picture....
  9. mtaylor
    Jay, I remembered where I'd seen hammocks... Toni's log: http://modelshipworld.com/index.php/topic/198-hms-atalanta-by-tlevine-1775-148-scale-from-tffm-plans/page-24#entry177468 It might help. There's discussion after that post. I think yours look good but you seem to be not a happy camper.. I hope the link helps.
  10. mtaylor
    Have a look here: http://modelshipworld.com/index.php/topic/6633-john-bowen-retires-at-shipwright/ I don't think there will one....
  11. mtaylor
    Wow! I like that lighting effect.
  12. mtaylor
    Nice work, Mike and a nice catch on the frame ends. You're doing a super job on the frames.
  13. mtaylor
    Hold fast, Popeye. You'll get it solved and fixed before we know it.
  14. mtaylor
    Thanks Dan for the wishes. Status at this point: While sanding down the tuck and bending wood, I got to thinking... Dangerous, I know. And what with Druxey getting me thinking outside the box a bit.. a lot actually and re-shape things, I re-looked overall the plans in detail even the obscure things... Hahn's build article and pictures... Druxey's input.. other builds.. and it dawned on me that one thing I missed was Hahn's severe beveling of the last cant frame. See attached. Once it soaked in what I needed to do, I realized it's only possible way to get that outside edge and the rest of the tuck to work right. While digging around in the hard copy files... I found part of the problem in a post-it note I stuck to the frame drawings . I hadn't pre-beveled it as radical as needed as the frame was flimsy and taking off halt the material on the trailing edge didn't seem like a good idea at the time. Well, actually, I did try it during construction and broke both sides twice and told myself "not now". Thus, the post-it note. I should have hung a big sign on the wall: "Bevel last aft frame, dummy!!" I'm beveling even more than what's been suggested and things are coming more into line. I sometimes really need a slap upside the head. I'm currently cleaning things up such that the fashion piece, existing planking (well.. the bits I haven't ripped off anyway) and framing and transoms. I'm also cleaning up the aft end of the existing wide planking. As soon as I can get one side put together, I'll post a photo Giampiero, Dan and Druxey, I owe you your favorite adult beverages for your help in spotting problems and your input. And I owe everyone for their support. Frame 53.pdf
  15. mtaylor
    Tom, Do it the way you are most comfortable with. Many of us build the mast up as much as possible (all sections, some do yards at this point, some don't, tops) and then install. Others do that and add as much rigging (carefully labeled, of course) then install the mast. Others build it one piece at a time, on the ship. I find it's easier to build the mast up as much as possible on the bench first. Including the upper shrouds and ratlines. I save the lower ones for after installation but I hold off on the ratlines and they are the last thing done.
  16. mtaylor
    Yes... books (there's 4 in the series) are available from Seawatch Books. The plans can be ordered from the Admiralty Models website.
  17. mtaylor
    It's all doable and it's all good... And to be very blunt, if it weren't for MSW, I would never, ever tried scratchbuilding. The help and encouragement is priceless. So a big thank you to everyone.
  18. mtaylor
    The lumber itself and if we go to the original frigates, look no further than the Confederacy.. green wood was the culprit.
  19. mtaylor
    Ben, Don't feel bad. I put the blade on backwards and generated max smoke... recently.
  20. mtaylor
    Thanks Druxey. Will do some more. Getting a bit thin but I pack from the other side if need be. And it's looking a whole lot better in the testing.
  21. mtaylor
    Being the conservative builder that I am especially when it comes to major changes, I've done some serious reshaping of the transoms. I think I'm close but I'd like some other opinions. I've blue taped down some thin battens. If it looks good, I'll start bending the real wood and planking. The ends of the existing planking are not a problem. I have some fashtion pieces that cover the counter timber ends and the hull planking timber ends.
  22. mtaylor
    I just discovered your log... looking very shipshape and Bristol fashion. Back the lathe, just get some old hacksaw blades and use them on the lathe like a scraper for trim. Put the design on the blade and cut it with a dremel. It works a treat for duplicating and won't wear out.
  23. mtaylor
    It seems as if there's an unwritten law in model shipbuilding..."There will be blood". I think we've done that.
  24. mtaylor
    It's indeed cold comfort, Druxey. I should have paid more attention when I was planning this build but I plead ignorance. I've stumbled upon several issues already and this is just one more. But... it's wood, it can be fixed. Time to go make some more sawdust..... and a template or two for symmetry.
  25. mtaylor
    I think you hit it dead center. That sofa looks great. Don't show it to any Admiral.. EVER!!! Because the next thing you know, they'll want one full size somewhere.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...