Jump to content

Granado by rafine - FINISHED - Caldercraft - 1:64


Recommended Posts

I spent a good deal of time trying to decide what to do for my next project. The choices ranged through scratch builds and modified kits, cross sections and full ships, and even some thought about doing a plastic or resin warship. In the end, I quickly rejected the modern ships because I just don't think that at my age (76) with arthritic hands and diminishing eyesight, I could do justice to anything in those very small scales.

 

A framed scratch build had strong appeal, but ,as I've explained in other logs, after doing the Triton cross section, I concluded that without power tools (I have nothing but a Dremel) a full framed model was just more than I wished to take on. That left the possibility of another cross section. I was drawn to the Admiralty Models Echo project and the Granado cross section project. The Granado held particular appeal, both because of it's unique subject and the wonderful models that had been turned out by Rusty, Grant and Mobbsie. I was almost set to do this when I realized, while doing the Cheerful rigging, just how much I enjoy rigging and would miss doing it on a cross section.

 

All of that led me to look at the build logs and great models of Granado done by Joe V. and Timmo. I was really impressed at what could be done with the kit with some modifications. Thus, the choice was made.

 

I now have the kit and the AOTS Granado book and I'm trying to figure out just what I'm going to do. I've not done a Caldercraft kit before or any kit with the ply gunport strips. Nor have I done any model with double planking in many years. Some things are clear: I will replace the kit wood with boxwood for the second upper hull planking and holly for the deck planking, as I've done on my recent builds. I'm still undecided as to what to do for the second lower hull planking. I'm inclined to use holly as I did on Fair American, rather than painting some other wood white, but this would also involve replacing the kit's stem, keel and sternpost parts with scratch built holly parts at the outset of the build. A quick decision is in order.

 

I'm looking forward to getting started, and hope that you'll follow along with me.

 

Bob

Link to comment
Share on other sites

A nice introduction to your new project Bob,.....

 

I will with pleasure be following along, wish you a good keellaying session in due time and just as much fun with the build as you had with the "Cheerful"

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

Ah... this is where you went.   :)   And it looks like there's still some chairs open....

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Okay, got my seat in the front row! Great choice Bob, and with your planned additions/variations, I'm sure it will be something very special. I like your idea of using Holly for the lower hull, even with extra work that will cause.

Link to comment
Share on other sites

Bob, I'd like to follow along, too. I look forward to your educational departures from the basic kit. Play on!

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

I look forward to following yuour build and learning much.

 

Best, Ian

Link to comment
Share on other sites

I just checked out Joe's Granado build. Looks like a beautiful ship and he did a great job.

Can't wait to see you work your magic with this one.  I'll be following along.

Good luck....

Steve

Till next time.....     😎

Steve

 

Finished:              Artesania Latina Constellation;   Model Shipways USF Confederacy:  Medway Longboat 1742 - Syren Ship Model Company

Current Build:     Syren's Winchelsea 

Link to comment
Share on other sites

Hi Bob. Great choice. I've thought about this model myself.

 

I'm looking forward to following along with everyone else. :)

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

This should be good! Good thing I got here early, I get a front row seat as well!

Edit: Any popcorn? Also, maybe I won't get a front seat…

Edited by Elijah

-Elijah

 

Current build(s):

Continental Gunboat Philadelphia by Model Shipways

https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/

 

Completed build(s):

Model Shipways Phantom

http://modelshipworld.com/index.php?showtopic=12376

 

Member of:

The Nautical Research Guild

N.R.M.S.S. (Nautical Research and Model Ship Society)

Link to comment
Share on other sites

Whatever you decide.  You are one of the 'Masters'.

March on!

Ken

 

NO PIRACY 4 ME! (SUPPORTING CHUCKS' IDEA)

 

Current Build:  

Washington 1776 Galley

Pilot Boat Mary of Norfolk

Completed Builds:

Continental Boat Providence   (from Completed Gallery)  (from MSW Build)

Continental Ship Independence  (from Completed Gallery)  (from MSW Build)

Rattlesnake   (from Completed Gallery)  (from MSW Build)

Armed Virginia Sloop  (from Completed Gallery)

Fair American (from Completed Gallery)  (from MSW Build Log)

 

MemberShip Model Society of New Jersey

                  Nautical Research Guild

Link to comment
Share on other sites

Pffffffffff,

 

On time !

 

He is not started yet.....yippie !!!!!!!!!!

 

Bob,

 

If you don't mind or if you mind, let me know and I will remove the popcorn machine.

What is a build without popcorn !!!!!

 

Sjors

 

 

nootjes_en_popcorn_18.gif

Link to comment
Share on other sites

Link to comment
Share on other sites

Hi Bob -- Great to see you picking it right up again.  Your thought process shows a clear deductive process operating, counselor.  ^_^

 

Sjors, pass that popcorn!

 

Martin

Current Build:  HMS FLY 1776

 

Previous Builds:  Rattlesnake 1781

                        Prince de Neufchatel

Link to comment
Share on other sites

HI Bob,

 

Granado, fantastic choice mate, most definitely my favourite build to date.

 

With the modifications you have planned she's gonna pop.

 

Depending on how you want to display your mortars you may want to give some thought to the storage of the mortar covers, there's no space on deck for them.

 

Good luck with this build mate.

 

Be Good

 

mobbsie

mobbsie
All mistakes are deliberate ( me )


Current Build:- HMS Schooner Pickle

 

Completed Builds :-   Panart 1/16 Armed Launch / Pinnace ( Completed ),  Granado Cross Section 1/48

Harwich Bawley, Restoration,  Thames Barge Edme, Repair / Restoration,  Will Everard 1/67 Billings 

HMS Agamemnon 1781 - 1/64 Caldercraft KitHM Brig Badger,  HM Bomb Vessel Granado,
Thames Steam Launch Louise,  Thames Barge Edme,  Viking Dragon Boat


Next Build :-  

Link to comment
Share on other sites

Work on Granado has now begun. As always, the initial work is fairly routine and a "just get through it" process. The ply framing pieces are good, although the slots are a little loose. This was easily corrected by my usual practice of overdoing bracing of the bulkheads with stripwood pieces. I also added pieces to box the mast holes.

 

The point of interest to me was that I decided to plank the lower hull in holly. As a result, I needed to do the stem and keel in holly, as well. The stem was cut from holly sheet, using the kit part as a template. The keel was cut from holly strip, with a boxwood strip added for a false keel, as shown in AOTS.

 

Now it's on to the dreaded gunport strips.

 

Bob

post-186-0-69070600-1460638195_thumb.jpg

post-186-0-89988100-1460638216_thumb.jpg

post-186-0-61700600-1460638237_thumb.jpg

Link to comment
Share on other sites

sweet looking frame Bob.    what are the half circles in bulkhead #9 for?

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Link to comment
Share on other sites

Looks good Bob!

-Elijah

 

Current build(s):

Continental Gunboat Philadelphia by Model Shipways

https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/

 

Completed build(s):

Model Shipways Phantom

http://modelshipworld.com/index.php?showtopic=12376

 

Member of:

The Nautical Research Guild

N.R.M.S.S. (Nautical Research and Model Ship Society)

Link to comment
Share on other sites

Another of the tedious tasks out of the way. The ply gunport strips have been installed. They actually turned out to be less troublesome than I had expected. I first did the fairing of the bulkheads to achieve a smooth run.Then, following the lead of prior builders of this kit, I glued (using medium CA) and clamped only the lower portions of the strips to the bulkheads. This seemed to avoid kinking. Since the upper extensions of the bulkheads will be removed later, this will also ease that process.

 

It is time now to turn to doing the first planking on the hull.

 

Bob

post-186-0-58292900-1460895191_thumb.jpg

post-186-0-91831300-1460895225_thumb.jpg

Link to comment
Share on other sites

Nice start. Looks good. I have myself looked at this ship a couple of times.

Regards, Scott

 

Current build: 1:75 Friesland, Mamoli

 

Completed builds:

1:64 Rattlesnake, Mamoli  -  1:64 HMS Bounty, Mamoli  -  1:54 Adventure, Amati  -  1:80 King of the Mississippi, AL

1:64 Blue Shadow, Mamoli  -  1:64 Leida Dutch pleasure boat, Corel  -  1:60 HMS President Mantra, Sergal

 

Awaiting construction:

1:89 Hermione La Fayette AL  -  1:48 Perserverance, Modelers shipyard

Link to comment
Share on other sites

nice progress and good work Bob,

 

looks like a good quality kit with sturdy well approved design, certainly you`ll turn it into another jewel under your hands...

Do you perhaps have an side- overview plan pic, so as to show what she looks like, with masts and rigging ?

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

Thanks so much Thomas, Scott and Nils and the "likes". 

 

Thomas, I must say that it seems like framing the bulwarks and ports would be as easy as using the ply parts, but that probably doesn't fit with the double planking method.

 

Nils, so far the kit seems good, although I will be replacing the wood for the hull and deck planking. A copy of a photo from the manual is attached so you can see what she looks like completed.

 

Bob

post-186-0-21825900-1460999900_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...