BANYAN Posted September 19, 2018 #61 Posted September 19, 2018 Coming along very nicely Daniel; your joinery is very well done. cheers Pat mtaylor 1 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
Forlani daniel Posted September 19, 2018 Author #62 Posted September 19, 2018 Ciao e grazie a tutti, siete tutti molto gentili, queste ultime coste sono abbastanza difficili da realizzare perché ho pochi punti di riferimento, infatti queste coste non sono disegnate. Hello and thank you all, you are all very kind, these last coasts are quite difficult to achieve because I have few landmarks, in fact these coasts are not drawn. Un Saluto John Allen, Mirabell61, davec and 17 others 20 Quote
druxey Posted September 19, 2018 #63 Posted September 19, 2018 Beautiful work! mtaylor and Mirabell61 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Forlani daniel Posted September 22, 2018 Author #64 Posted September 22, 2018 Ciao e grazie a tutti, altre foto. Hello and thanks to everyone, more photos. Un Saluto yvesvidal, Captain Poison, kees de mol and 14 others 17 Quote
mtaylor Posted September 23, 2018 #65 Posted September 23, 2018 Beautiful, precise framing. Very well done, Daniel. John Allen and Bob Legge 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Forlani daniel Posted September 23, 2018 Author #66 Posted September 23, 2018 Ciao e grazie a tutti, altre foto. Hello and thanks to everyone, more photos. Un Saluto albert, oneslim, Captain Poison and 17 others 20 Quote
druxey Posted September 23, 2018 #67 Posted September 23, 2018 Excellent! That must be the last frame. mtaylor 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Forlani daniel Posted September 25, 2018 Author #68 Posted September 25, 2018 Ciao e grazie a tutti. Hello and thank you all. Un Saluto davyboy, druxey, Jeronimo and 14 others 17 Quote
BANYAN Posted September 26, 2018 #69 Posted September 26, 2018 very nice work; this is an exemplar in how to make well fitting joints! cheers Pat Jeronimo and druxey 2 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
Amalio Posted September 26, 2018 #70 Posted September 26, 2018 Fantastic work. mtaylor and druxey 2 Quote AMALIO
Forlani daniel Posted September 30, 2018 Author #71 Posted September 30, 2018 Ciao e grazie a tutti, altre foto. Hello and thanks to everyone, more photos. Un Saluto Bob Legge, Jeronimo, Valeriy V and 16 others 19 Quote
Mirabell61 Posted September 30, 2018 #72 Posted September 30, 2018 Excellent work Daniel, its a pleasure to watch this model grow !! Nils Jeronimo 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
Forlani daniel Posted October 8, 2018 Author #73 Posted October 8, 2018 Hi everyone, thanks Nils, finally I've come to the end, now I'll start with the nailing. Un Saluto. yvesvidal, druxey, mtaylor and 21 others 24 Quote
tabycz Posted October 11, 2018 #74 Posted October 11, 2018 Daniel, great job! I enjoy your precious work and look forward to your next progress. ;) Quote
Forlani daniel Posted October 15, 2018 Author #75 Posted October 15, 2018 Hello everyone and thank you for all your likes. Un Saluto oneslim, paulsutcliffe, Hubac's Historian and 23 others 26 Quote
luc Posted October 15, 2018 #76 Posted October 15, 2018 Very nice indeed, are you still using walnut wood for nailing, and what's the thickness? Quote
Forlani daniel Posted October 15, 2018 Author #77 Posted October 15, 2018 Ciao, grazie Dirk e Luc, stò utilizzando il legno di noce per la chiodatura in tutte e due i lati della costa, per simulare un perno passante, lo spessore è di 0,5mm. nella realtà 24mm. circa. Un Saluto. Hi, thanks Dirk and Luc, I'm using the walnut wood for nailing on both sides of the coast, to simulate a through pin, the thickness is 0.5mm. in reality 24mm. about. Greetings. mtaylor and druxey 2 Quote
Forlani daniel Posted October 21, 2018 Author #79 Posted October 21, 2018 Ciao e grazie a tutti Hello and thanks to all Un Saluto oneslim, yvesvidal, Ondras71 and 19 others 22 Quote
druxey Posted October 21, 2018 #80 Posted October 21, 2018 I assume you must mark the positions of the drainage holes very carefully before cutting them off the model! Beautiful work, Daniel. mtaylor 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Forlani daniel Posted October 22, 2018 Author #81 Posted October 22, 2018 (edited) Hi druxey, it was not easy to trace the drainage channel because it is only 1 mm wide anyway it went well, thanks to all for like. Greetings Edited October 22, 2018 by Forlani daniel BANYAN, mtaylor, paulsutcliffe and 1 other 4 Quote
Forlani daniel Posted November 16, 2018 Author #82 Posted November 16, 2018 Ciao a tutti, il cantiere prosegue, altre foto. Hello everyone, in the pipeline continues, more photos. Un Saluto michael mott, Mirabell61, druxey and 15 others 18 Quote
BETAQDAVE Posted November 16, 2018 #83 Posted November 16, 2018 On 8/2/2018 at 7:38 AM, Forlani daniel said: Hello everyone, this is the system I adopted to paste the various pieces of the coast. That is an ingenious little clamping system you've got there for making your frames! And while most people using those layout forms actually try to cut notches for the frames, you just use spacer blocks. It appears that by leaving the smooth curve of the hull form intact makes it easier to get your frames to also remain aligned in a smooth curve. Smart! mtaylor 1 Quote Dave “You’ve just got to know your limitations” Dirty Harry Current Builds: Modified MS 1/8” scale Phantom, and modified plastic/wood hybrid of Aurora 1:87 scale whaling bark Wanderer. Past Builds: (Done & sold) 1/8” scale A.J. Fisher 2 mast schooner Challenge, 1/6” scale scratch built whaler Wanderer w/ plans & fittings from A.J. Fisher, and numerous plastic kits including 1/8” scale Revell U.S.S. Constitution (twice), Cutty Sark, and Mayflower. (Done & in dry dock) Modified 1/8” scale Revell U.S.S. Constitution w/ wooden deck and masting [too close encounter w/conc. floor in move] Hope to get to builds: MS 3/16” scale Pride of Baltimore II, MS 1/2” scale pinky schooner Glad Tidings, a scratch build 3/16” scale Phantom, and a scratch build 3/16" scale Denis Sullivan.
Forlani daniel Posted November 22, 2018 Author #84 Posted November 22, 2018 Hello and thanks to everyone, more photos Un Saluto Jeronimo, Ondras71, Siggi52 and 17 others 20 Quote
michael mott Posted November 22, 2018 #85 Posted November 22, 2018 Hello Daniel, I just found your build. What a superb job you are doing, I am inspired by the way you are able to use manual control on your mill to create a curve, I know that it is not easy to do. Your assembly of the frames looks like a very good way to clamp them. The exploded view of the successively smaller frames for the bow is almost like an installation sculpture. beautifully executed wood work. I shall continue to follow along. Michael popash42, mtaylor, druxey and 4 others 7 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
archjofo Posted November 22, 2018 #86 Posted November 22, 2018 Fantastic work! druxey, Mirabell61, paulsutcliffe and 2 others 5 Quote Best regards Johann Video: La Créole - Scale 1/48, French corvette of 1827 - naval artillery La Créole - Scale 1/48, French corvette - Construction of long boat La Créole - Scale 1/48, French corvette - Construction of the masts La Créole - Scale 1/48, French corvette - 2019 La Créole - Scale 1/48, French corvette - standing rigging - part 1 La Créole - Scale 1/48, French corvette - standing rigging - part 2 La Créole - Scale 1/48, French corvette - standing rigging - part 3 See also our german forum for Sailing Ship Modeling and History: www.segelschiffsmodellbau.com
Forlani daniel Posted November 26, 2018 Author #87 Posted November 26, 2018 Ciao e grazie a tutti, siete troppo gentili. Altre foto. Hello and thank you all, you're too kind. More photos. Un Saluto Jolley Roger, KORTES, Jeronimo and 24 others 27 Quote
Mirabell61 Posted November 26, 2018 #88 Posted November 26, 2018 Wundebar Daniel, !! Nils mtaylor 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
BANYAN Posted November 26, 2018 #89 Posted November 26, 2018 Very nice workmanship Daniel. cheers Pat mtaylor 1 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
Forlani daniel Posted November 29, 2018 Author #90 Posted November 29, 2018 Hello and thanks to everyone, more photos Un Saluto. Mirabell61, tadheus, paulsutcliffe and 23 others 26 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.