-
Posts
25,991 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by mtaylor
-
Nice work, Mike. It's great to see progres. One thought though it's too late now. When you're drilling holes for sheaves and fixed blocks, while still on the mill after drilling holes, you can connect the holes (instead of using a gouge or files) by using the drill bit (or change out to a mill bit of the same size) and make that groove. Try it on some scrap next time and you'll see what I mean.
-
Fantastic micro work. I'm surprised you could make something that tiny functional. Very well done.
-
Cutty Sark by NenadM
mtaylor replied to NenadM's topic in - Build logs for subjects built 1851 - 1900
It sounds a like a great adventure to do this. I'll go read the link, look up the names you mentioned and not clog your build log.- 4,151 replies
-
- cutty sark
- tehnodidakta
-
(and 1 more)
Tagged with:
-
NIce scarph joints, Mike. Always better to be a bit tight than too loose. Tight can be fixed.
- 901 replies
-
- hahn
- oliver cromwell
-
(and 1 more)
Tagged with:
-
It's good to see that you get to make a bit of sawdust, Walter. You're off with a good start...
-
Pat, Faking it will work. I've set up the parrels and trucks off ship such that there ends up a single line coming off each end of the parrels much like a necklace. I then wrap and tie the parrels to the yard. I hope that makes sense. If not I'll try to find a picture or make a quick drawing.
-
Brig USS Enterprise 1799 info gathering
mtaylor replied to CharlieZardoz's topic in Nautical/Naval History
Then they should scan it so they have the drawing for when that one falls apart. Engineering departments do that all the time for that very reason. -
Pat, If it's not too late, pin the yard to the mast. It'll give you some stability and hold the mast in position.
-
Brig USS Enterprise 1799 info gathering
mtaylor replied to CharlieZardoz's topic in Nautical/Naval History
Oh... a copy... that changes everything then. -
Brig USS Enterprise 1799 info gathering
mtaylor replied to CharlieZardoz's topic in Nautical/Naval History
Alex, I don't think your wrong... but there might be other stipulations on the plans or with whoever gave them the plans. Perhaps the issue is that they're worried that someone will take the plans and turn around and sell them like certain pirate sites do? Might be worth a short email explaining that they're for personal use... Then again, some museums are really protective which limits their usefulness as a research resource from a distance. -
Thanks for the comments and "likes". It's mostly just fiddly work in Corel Draw. No programming as such, David. Which makes me very happy. Well, all has not been quiet here in the shipyard. making progress. On the down side, it is slow, slightly maddening work to translate a 2D drawing into a 3D part.... Luckily, when the first side is done, the second side should go a lot faster. I've got two of the three windows glazed and in place. The third is currently somewhere in the workshop with the glazing drying (I'm using liquid glaze). I've probably cut and re-worked, and re-cut 20 or wo windows to get to this point and I find them very fiddly indeed. I've started working on the gallery roof(s) and drop(s) for both sides but have nothing to show in photos yet. So here's the two windows in place. Feel free to speak up if something is awry while I can still get access to the part. The slight (ahem) misfit at the bottom of the taffrail where the lower molding meets will be hidden by carvings. I've started those also....
-
Amen to the manta, Greg. I was thinking the same thing about cross-sections, etc. It reminded me of Jeronimo's Bon Homme Richard done in 3 sections.
- 887 replies
-
On the actual ship plans (and not all kit plans have them) there's the lines drawings. If you'll go here and look at Russell Barnes article on interpreting line drawnigs, you'll see them. What Ben is doing is using those type of drawings. The waterlines on the body plan give references (not actual waterlines as we think about it) to height above the keel. Then he's using the warterlines drawing to get the shape of the hull for beveling. I think that with most kits, most builders just fair the bulkheads using a batten strip and don't go to this trouble.
-
Can i live without a BYRNES TABLE SAW
mtaylor replied to shihawk's topic in Modeling tools and Workshop Equipment
Al, Have a look here: http://www.hobbymillusa.com/byrnes-saw-operation.php Jeff has guidlines for teeth count for different thicknesses of wood. -
I too, know next to nothing about sailing these but what you're showing seems reasonable and less complicated than what the plan called for.
- 64 replies
-
- 18th century longboat
- model shipways
-
(and 1 more)
Tagged with:
-
It's still amazing work you're doing, Greg. Wood kits require a lot of bashing also along with all the poor fit of parts, etc. I'm not sure what it is about ship kits. It might be the markets. Kids seem to be interested in the RC cars and there's the trains and planes. The hobby shops I've been to seldom carry a good selection of kits. But, if you ask, they have the catalogs will order. I think it's the Internet.. a bigger selection, cheaper and faster to buy online.
-
Bill, Would there even have been room inside for the gun crew to work any guns in those ports?
- 382 replies
-
- sovereign of the seas
- carving
-
(and 1 more)
Tagged with:
-
Looking great, Mick. I like that cutting jig for the ports.
- 504 replies
-
- washington
- galley
-
(and 1 more)
Tagged with:
-
Your buddy could be right. The photos do look like the real thing. Wonderful work, Neal.
-
It's a pity that the Admirals are spoilsports. That is impressive and a feast for the eyes, Dave.
- 962 replies
-
- sovereign of the seas
- ship of the line
-
(and 1 more)
Tagged with:
-
Stunning work, Nils. Using steel cable is something we don't see often but it looks great.
- 2,625 replies
-
- kaiser wilhelm der grosse
- passenger steamer
-
(and 1 more)
Tagged with:
-
Can i live without a BYRNES TABLE SAW
mtaylor replied to shihawk's topic in Modeling tools and Workshop Equipment
Al, Are you using the right blade? Can you post a picture? -
Sorry to hear that the time has come to pack it all up, Rusty. We'll just have to wait for things to be moved and the turmoil that moving entails to be settled.
- 310 replies
-
- cheerful
- Syren Ship Model Company
-
(and 1 more)
Tagged with:
-
Cutty Sark by NenadM
mtaylor replied to NenadM's topic in - Build logs for subjects built 1851 - 1900
I like the methodical approach you're taking, Nenad. It's paying off with the pieces you're making.- 4,151 replies
-
- cutty sark
- tehnodidakta
-
(and 1 more)
Tagged with:
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.