DocBlake Posted July 31, 2017 #871 Posted July 31, 2017 Great job on the longboat! Love the detail. JesseLee, Elijah, Canute and 4 others 7 Quote Dave Click on images in posts to view them in full resolution! Click on the builds below and link to the log. Current Builds: -Gaff-Rigged Sloop, 1/4 Scale (3" = 1') -Chapman Water Hoy 1768 by DocBlake - Scratch Build - 1:48 scale -Hannah - 1:32 scale, Scratch-Built Plank-on-Frame Admiralty style -Generic Sharpie by DocBlake. 3/4" = 1' scale. NRG plans. -Fair American 1780 by DocBlake - Lauck Street Shipyard - 1/48 scale - POF -Independence 1775 by DocBlake - Artesania Latina - 5/16" scale -HMS Triton Cross Section by DocBlake - 1/24 scale Completed Builds: -Bomb Vessel Granado 1742 Cross Section - 1:32 Scale Scratch Build -British Capstan circa 1777 by DocBlake - FINISHED - 1:16 Scale -HMS Blandford - Cross Section - Scratch Build -1/32 Scale -17th Century Battle Station by DocBlake - HMS Mordaunt - 1:32 -17th Century Naval Cannon - 1:12 Scale -Royal Navy Ship of the Line Cross Section by DocBlake - (Mamoli's "Constitution") - 1:93 scale -Armed Virginia Sloop 1768, 1/48 scale. -Virginia Pilot Boat "Swift", 1805, 1/50 scale -18th Century Naval Battle Station, 1/24 scale -Armed Virginia Sloop 1768 "Patrick Henry", 1/32 scale, Lauck Street Shipyard, POF, Admiralty Style.
JesseLee Posted August 9, 2017 Author #872 Posted August 9, 2017 (edited) Still having trouble adjusting to the much slower pace with the building. With my declining health simple things are not so simple anymore. I have to do the hammock cranes still but have decided to start pre-making and dry-fitting some stuff before I add them. Already made the bowsprit bitts but forgot to post it. Sanding the grove the bowsprit will fit in with sandpaper rolled around a wooden dowel. Began shaping lower bowsprit. Jesse Edited August 9, 2017 by JesseLee Dubz, mtaylor, Canute and 14 others 17 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
JesseLee Posted August 10, 2017 Author #873 Posted August 10, 2017 Working on bees, bowsprit cap, yard sling saddle, jack staff, etc. Jesse Altduck, Dubz, Heronguy and 16 others 19 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
cog Posted August 10, 2017 #874 Posted August 10, 2017 Nice work on the parts, looks good, very clean details. Waiting with anticipation on final installation ... BETAQDAVE, CaptainSteve, Canute and 6 others 9 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ...
mtaylor Posted August 10, 2017 #875 Posted August 10, 2017 Nice work, Jesse. Steady as she goes, I think. Canute, Altduck, CaptainSteve and 4 others 7 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Tim Curtis Posted August 10, 2017 #876 Posted August 10, 2017 Jesse, Looks fantastic. Enjoy watching your build. Praying for your health mate. Tim. Canute, Salty Sea Dog, Elijah and 6 others 9 Quote
SawdustDave Posted August 11, 2017 #877 Posted August 11, 2017 Took me a while to catch up with your progress Jesse. Outstanding longboat mate! Your Syren is coming along beautifully. You should be very proud of your fine work. Dave Canute, Altduck, Ryland Craze and 5 others 8 Quote Sawdust Dave - Current build - USS Constitution 1:60th (scratch).... Visit my blog site - All previous builds.... http://davesmodelships.blogspot.com
Piet Posted August 16, 2017 #878 Posted August 16, 2017 Great progress JesseLee - - steady as she goes mate. Cheers, Salty Sea Dog, cog, mtaylor and 6 others 9 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
fnkershner Posted August 17, 2017 #879 Posted August 17, 2017 Jesse that is an amazing Long Boat. Can I hire you for my Syren? o) Altduck, JesseLee, mtaylor and 5 others 8 Quote Current Builds - 18th Century Longboat, MS Syren Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18 On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, Its a sailor's Life for me!
Chasseur Posted August 17, 2017 #880 Posted August 17, 2017 Looking good and I hope your health improves ... Jeff Canute, Piet, HIPEXEC and 5 others 8 Quote A mighty fortress is our God a bulwark never failing!
JesseLee Posted August 22, 2017 Author #881 Posted August 22, 2017 After what seems like forever I finished the Bowsprit. Making the Jibboom: Sanded the eight sides to the heel. Mine turned out to be not as big around as the pictures in the instructions show but close enough to be fine with me. Grooved and shaped the tip. Cut out the sheaves in both ends then realized I cut the sheaves wrong. The tip sheave goes through top/bottom. The heel sheave is supposed to go through sideways and I cut mine both top//bottom. Instead of remaking a whole new Jibboom I sawed off the heel right between where out is rounded and where the eight flat sides are. Drilled both ends out and glued in a 2mm wire pin. Glued it on with the sheave turned the right way. (I had previously left extra length to this end in case of any problems). The seam is almost invisible and this will also be right at a paint line so it wont be noticed. The wire pin made it very strong. Cut this end to length and grooved it out on the end. Jesse HIPEXEC, CDW, egkb and 19 others 22 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
cog Posted August 23, 2017 #882 Posted August 23, 2017 Nice work Jesse. Good save on the sheave. It is indeed hard to spot if you know it, so it will be invisble to the unknowing eye. Canute, Elijah, Piet and 2 others 5 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ...
Gahm Posted August 23, 2017 #883 Posted August 23, 2017 Very nice work on the whole bowsprit/ jibboom assembly! Thomas cog, Elijah, Canute and 3 others 6 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864)
Piet Posted August 24, 2017 #884 Posted August 24, 2017 Nice done JesseLee ad a great save. Cheers, Elijah, Ryland Craze and popeye the sailor 3 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
popeye the sailor Posted August 24, 2017 #885 Posted August 24, 2017 nice work Jesse Elijah, Piet and Canute 3 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
JesseLee Posted September 23, 2017 Author #886 Posted September 23, 2017 It has been quite a while since my last update. My illness along with many other things have kept me from the work bench. Seems life keeps dumping more and more on me including another death in the family. I am very thankful though when I see all the devastation happening in so many places. At least I still have a home and a work bench to get back to. The instruction book has me ready to start permanently adding the bowsprit assembly and rigging it. I am holding off just like I did the Hammock cranes and netting. I like to pre-make all the physical parts from the bowsprit, jibbooms, masts, yards, tops, etc. first. I do this to make sure all parts are made the right size and fit properly ahead of time. I have found in the past that if you don't look ahead sometimes having to alter a later piece might affect how everything fits or spaces with pieces you have already glued in place. This also can apply to how the rigging ends up so I just like to do things this way. The next series of updates will be me pre-making all these parts, a lot of dry fitting and checking that everything will end up like it is supposed to be. Then I will go back and start gluing things into place in their order so I can get to the rigging stages. Below is the only picture I have ready at the moment of constructing the Dolphin Striker. When there are separate small pieces like tis glued together that will have rigging pulling on them I like to have tiny metal pins between each piece for extra strength. More updates coming soon. Jesse cog, GaryKap, Jack12477 and 17 others 20 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
HIPEXEC Posted September 23, 2017 #887 Posted September 23, 2017 Go get 'em, Jesse Lee cog, Canute, Elijah and 4 others 7 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
JesseLee Posted October 1, 2017 Author #888 Posted October 1, 2017 Dry fitting of the bowsprit, jibboom & flying jibboom. Jesse Nirvana, alde, clearway and 14 others 17 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
JesseLee Posted October 1, 2017 Author #889 Posted October 1, 2017 Started the lower masts. Used poplar dowels I picked up at Lowes. To square the top part I started with a mini plane sent to from Europe. Then finished with emory sticks women use for their nails. Made the cheeks Notched them for bands. Jesse BETAQDAVE, egkb, MD11pilot and 16 others 19 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
JesseLee Posted October 1, 2017 Author #890 Posted October 1, 2017 The cleats supplied in the kit are cheap metal stuff and I just can't see trying to use them at all. Decided to make my own. Had some scrap pieces of some kin of hard wood cut off the end of something. Cut out into small strips then shaped with mini files. Made all the ones needed on the lower masts and the ones that will be needed in the rigging later. Close ups of both ends of the completed lower masts. Jesse Seventynet, mtaylor, Dubz and 27 others 30 Quote Current build: Syren : Kit- Model Shipways Side project: HMS Bounty - Revel -(plastic) On hold: Pre-owned, unfinished Mayflower (wood) Past builds: Scottish Maid - AL- 1:50, USS North Carolina Battleship -1/350 (plastic), Andromede - Dikar (wood), Yatch Atlantic - 14" (wood), Pirate Ship - 1:72 (plastic), Custom built wood Brig from scratch - ?(3/4" =1'), 4 small scratch builds (wood), Vietnamese fishing boat (wood) & a Ship in a bottle
HIPEXEC Posted October 1, 2017 #891 Posted October 1, 2017 7 hours ago, JesseLee said: The cleats supplied in the kit are cheap metal stuff and I just can't see trying to use them at all. Decided to make my own. Had some scrap pieces of some kin of hard wood cut off the end of something. Cut out into small strips then shaped with mini files. Made all the ones needed on the lower masts and the ones that will be needed in the rigging later. Close ups of both ends of the completed lower masts. I love your self made cleats!! I've got to make them also. The ones with the kit are awful. Nice Job Canute, Robin Lous, JesseLee and 7 others 10 Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
Tigersteve Posted October 1, 2017 #892 Posted October 1, 2017 This is looking really good, Jesse. I like it. Steve Elijah, Piet, JesseLee and 2 others 5 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
cog Posted October 1, 2017 #893 Posted October 1, 2017 Great work on the bowsprit and the jibs. Those cleats look real good, and the lower masts definitely look very promising. Looking forward to the next stages of the masts! Nirvana, mtaylor, JesseLee and 4 others 7 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ...
MD11pilot Posted October 1, 2017 #894 Posted October 1, 2017 I’m really enjoying your build. I agree with the others - I’m going to follow your lead and make wood cleats. The metal ones just won’t cut it. Love the little plane. How in the world did you find it. Nirvana, Elijah, mtaylor and 3 others 6 Quote Eric O.<p>Current Build: US Brig Syren, kit
fnkershner Posted October 1, 2017 #895 Posted October 1, 2017 Jesse - I know it is too late for you but for everyone else in the Syren Club Chuck makes some great Cleats out of boxwood. Jack12477, MD11pilot, HIPEXEC and 4 others 7 Quote Current Builds - 18th Century Longboat, MS Syren Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18 On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, Its a sailor's Life for me!
Jim Rogers Posted October 1, 2017 #896 Posted October 1, 2017 Syren Shipbuilding has wooden cleats in various sizes. Elijah, MD11pilot, Piet and 4 others 7 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut.
lambsbk Posted October 2, 2017 #897 Posted October 2, 2017 Those parts look really good Jesse. Amazing progress. Dave Canute, Elijah, cog and 2 others 5 Quote Dave U.S.S. Constitution 1:96 Revell build with fiber optic lighting
Piet Posted October 2, 2017 #898 Posted October 2, 2017 Mighty fine work JesseLee. Yup, there's nothing like scratch building your own parts. Cheers, Elijah, JesseLee, Canute and 2 others 5 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
Gahm Posted October 2, 2017 #899 Posted October 2, 2017 Great progress, Jesse! Your masts are looking very good! Thomas Canute, JesseLee, Piet and 1 other 4 Quote Current Built: Model Shipways Syren (US Brig 1803) Last Built: Anfora (kit bashed) Ictineo II (1st steam powered submarine 1864)
John Allen Posted October 2, 2017 #900 Posted October 2, 2017 Jesse Lee I have to add my 2 cents re: The made cleats over the metal is the difference between an ok model or a class 1 build, these are the small things that hits you between the eyes in the appearance of a finished build. I am really surprised they included those nasty looking cleats in the model that was not cheap and would have added little if any to the cost of the kit. Very nice job you improved the appearance by 100% JesseLee, Piet, Canute and 3 others 6 Quote John Allen Current builds HMS Victory-Mamoli On deck USS Tecumseh, CSS Hunley scratch build, Double hull Polynesian canoe (Holakea) scratch build Finished Waka Taua Maori War Canoe, Armed Launch-Panart, Diligence English Revenue Cutter-Marine Model Co.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.