Egilman Posted July 23, 2022 Author Share #331 Posted July 23, 2022 (edited) Second RnB coat applied to the upper wing surfaces.... Looks good from here, consistent aluminum sheen with slightly darker splotches in streaks, I can't wait to get this out in some real sunshine... With high flash to show the reflectivity.... The slightly darker streaks wash out in heavy light... It literally glows!!! Yea Team! that is exactly the effect I was looking for.... Real sunlight will tell the tale.... Got to get the second coat on the bottom and then on to the fuselage and empennages.... I think it's going to turn out nice.. Edited July 23, 2022 by Egilman mtaylor, Landlubber Mike, hof00 and 13 others 14 1 1 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Javlin Posted July 23, 2022 Share #332 Posted July 23, 2022 Just your overhead light EG makes it reflect well! Dave_E, popeye the sailor, Old Collingwood and 5 others 8 Quote Link to comment Share on other sites More sharing options...
Egilman Posted July 23, 2022 Author Share #333 Posted July 23, 2022 1 hour ago, Javlin said: Just your overhead light EG makes it reflect well! Thanks Jav!!! This afternoon, the sun came out.... So I took the wing out to back porch to get some natural sunlight shots to confirm what I think I have... Direct reflection... Now she should start turning bluish silver as the aspect changes.... I think I've found the secret to doing this finish.... That is perfect coloration which changes as the light conditions and angle changes.... YAY TEAM!!!! When I do the fuselage I will spell out the steps to getting this effect... It looks even more stunning in real life.... Looks real... I'm pleased with it.... AJohnson, yvesvidal, popeye the sailor and 11 others 8 6 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Old Collingwood Posted July 23, 2022 Share #334 Posted July 23, 2022 That is looking splendid - really shiny. OC. popeye the sailor, Egilman, king derelict and 6 others 8 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
king derelict Posted July 24, 2022 Share #335 Posted July 24, 2022 Beautiful finish; well worth all the experimentation and research. Its going to be a stunning model Alan Canute, Edwardkenway, mtaylor and 4 others 6 1 Quote Link to comment Share on other sites More sharing options...
Canute Posted July 24, 2022 Share #336 Posted July 24, 2022 You've scored a bullseye with that finish. All the detail looks superb. Well done brother.👍 king derelict, Dave_E, popeye the sailor and 5 others 7 1 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
mtaylor Posted July 24, 2022 Share #337 Posted July 24, 2022 Bingo... the master at work and success. Egilman, king derelict, Dave_E and 4 others 6 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Egilman Posted July 24, 2022 Author Share #338 Posted July 24, 2022 18 hours ago, Old Collingwood said: That is looking splendid - really shiny. OC. Thanks Brother, it looks the part.... 17 hours ago, king derelict said: Beautiful finish; well worth all the experimentation and research. Its going to be a stunning model Alan Appreciated Alan, sometimes perseverance pays off... 17 hours ago, Canute said: You've scored a bullseye with that finish. All the detail looks superb. Well done brother.👍 I hope so my friend... now to replicate it on the fuselage... 17 hours ago, mtaylor said: Bingo... the master at work and success. I don't know about the master part Mark, but at least I'm hoping I can take the mystery out of the Rub n Buff finish, It's been around for decades but no one has been willing to fully document it ... There is nothing else like it.... and nothing that will replicate it... Dave_E, king derelict, popeye the sailor and 5 others 8 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Danstream Posted July 24, 2022 Share #339 Posted July 24, 2022 It looks very good EG, reflectivity is very credible. Surface details are awesome, I can even see some waviness of stressed skin, am I right? Best regards, Dan Edwardkenway, popeye the sailor, CDW and 6 others 8 1 Quote Current build : Mayflower - AL 1:64, Lady Nelson - Amati Victory 1:64 Completed non-ship builds : Spitfire MK I - 1:48, Arado 196B - 1:32, Sea Fury - 1:48, F-15C Eagle - 1:48, Hawker Tempest Mk.V - 1:48, F104S Starfighter - 1:48 "The most effective way to do it, is to do it" - Amelia Earhart Link to comment Share on other sites More sharing options...
CDW Posted July 24, 2022 Share #340 Posted July 24, 2022 19 minutes ago, Danstream said: I can even see some waviness of stressed skin, am I right? Best regards, Dan I saw that too Dave_E, Old Collingwood, Jack12477 and 5 others 7 1 Quote Completed Projects: USS Fletcher 1:144 Scharnhorst 1:350 USS Independence LCS-2 1:350 1:32 J7W1 Shinden Interceptor/Fighter Fairey Swordfish Mk. II 1:48 Harbor Tug Box Scale Albatros D.V 1:32 Ala-Kart 1:25 Ferrari 250 GT California Spyder 1:24 S-100 Schnellboot 1:72 Mercury Capsule and Atlas Booster BR-52 Steam Locomotive 1:35 Triumph 3 HW Motorcycle 1:9 Scale F-16XL-2 Experimental Fighter Bomber 1:48 Rafale 1:48 F-15E Strike Eagle 1:48 Petlyakov PE-2 Soviet Dive Bomber 1:48 TBM3 Avenger 1:32 1931 Cadillac 1:25 Scammell Pioneer SV2S Heavy Breakdown Tractor 1:35 M-50 Israeli Sherman 1:35 Military Wrecker 1:32 Delahaye 135 1:24 Toyota Sard Supra GT 1:24 Enzo Ferrari 1:24 1970 Baldwin Motion Camaro 1:25 1966 Ford Galaxie 500 Stock Car 1:25 American LaFrance Eagle Fire Pumper 1:25 1940 Ford Standard Coupe 1:25 VolksWagen Dragster/Dune Buggy/Street Rod 1:25 Kawasaki Ninja H2 Carbon 1:12 Porsche GT-1 Evo 1:24 Scharnhorst 1940 1:700 IJN Akitsushima Seaplane Tender 1:700 HMS Hood 1941 1:700 Prinz Eugen 1942 1:700 Link to comment Share on other sites More sharing options...
Egilman Posted July 24, 2022 Author Share #341 Posted July 24, 2022 (edited) 2 hours ago, Danstream said: It looks very good EG, reflectivity is very credible. Surface details are awesome, I can even see some waviness of stressed skin, am I right? Best regards, Dan Thanks Dan... 2 hours ago, CDW said: I saw that too Yep it's there... A few pics... Bare plastic... You see nothing but the rivet lines.... But once the wing surface becomes shiny.... You see the stressed skin surface... It was pretty much invisible on the bare plastic... Look at the back wing, the rivet lines coincide with the very subtle stressed skin effect they somehow molded into the surface... And still being very subtle, it shows up under the silver, an effect of realism I still don't know how they did it.... It's absolutely amazing, nothing I've ever seen before.... They modeled stressed skin, and did it very effectively.... Edited July 24, 2022 by Egilman Edwardkenway, CDW, popeye the sailor and 6 others 7 2 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Egilman Posted July 24, 2022 Author Share #342 Posted July 24, 2022 (edited) Update: Rub n Buff how I apply it... I start by using nitrile gloves.... You can do it without the gloves, but it does make whatever you touch a bit messy, it will come off the fingers with IPA... We first start by applying a dab on your finger... You then press the dab between your fingers to thin it out you want to apply as thin a coat as possible less is better in this application... Then, you just spread it directly on the gloss painted surface of your model... Do not allow it to dry, if you start to feel your fingers dragging on the surface the wax based Rub n Buff is dry, get another dab and repeat the process until your surface you want silvered is covered... Once covered, and allowed to dry for a time (I go overnight) use a fine grain, lint free cloth, (t-shirt cloth is what I use) and rub out the surface.... Just like applying paste wax to your car, rub it on, buff it out.... When done it will feel silky smooth.... the cloth will glide over the surface and be careful it's easy to drop your model... With the fuselage covered she looks like this... Of course there is some touching up that is needing to be done and that is done with a pointed q-tip which you can get at Hobby Lobby... What she looks like in the sunshine.... Onwards..... Edited July 24, 2022 by Egilman CDW, hof00, popeye the sailor and 10 others 12 1 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Canute Posted July 25, 2022 Share #343 Posted July 25, 2022 EG, how recent is this kit. The reason I ask is some of the resin railroad car kit makers are working oilcanning effects into the car sides thru the 3D masters used to prepare the resin molds. These kits are about 5 or so years old, as the 3D masters have been improved. These are in 1/87th scale, HO. It's beautiful that these stressed panels show up so realistically. SDo you seal the Rubnbuff? Dave_E, mtaylor, Jack12477 and 3 others 6 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
Egilman Posted July 25, 2022 Author Share #344 Posted July 25, 2022 (edited) It's a 2007 first issue Ken... The first kit they marketed.... Yes it has to be sealed, the finish although hard surfaced will come off rather easily with finger oils... Paul Cordyrette recommended future and when I built the P-51 I sealed it with a coat of future brushed on and allowed to thoroughly cure... It didn't change the look or reflectiveness any just darkened it ever so slightly.... So after I break it down and do the Rub n Buff touch up's it will get a coat to seal it in before I do the detail painting... It's such a realistic impression that I'm still amazed at it and I've been looking at it for a few days now... Edited August 16, 2022 by Egilman Dave_E, Edwardkenway, Canute and 5 others 8 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Canute Posted July 25, 2022 Share #345 Posted July 25, 2022 That model maker was a wizard, doing that kind of work on steel molds. I can't wait to see the next installment. popeye the sailor, Old Collingwood, Edwardkenway and 4 others 6 1 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
Egilman Posted July 26, 2022 Author Share #346 Posted July 26, 2022 I agree Ken, He is/was a real artist with this one, and being a first release I imagine the technical aspects of molding have gotten better with time... This is my first and only Kinetic kit so far and I'm thoroughly impressed with it's level of detail... Especially for a first release.... I will eventually build another Kinetic Kit, and, as of right now I fully recommend them as 1st rate model makers... I may locate another one, and give it the full museum display treatment, (a few things I would have done differently for a better part alignment/fit) This kit deserves that level of treatment... The next installment is coming as soon as I get over the fever and shakes, I'm suffering from MSW withdrawals right now... {chuckle} Good to see them back up and online.... popeye the sailor, Canute, Dave_E and 5 others 8 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Canute Posted July 26, 2022 Share #347 Posted July 26, 2022 Yeah, the outage was a PITA, but survivable (barely😁) mtaylor, king derelict, Edwardkenway and 3 others 5 1 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
Old Collingwood Posted July 26, 2022 Share #348 Posted July 26, 2022 4 hours ago, Canute said: Yeah, the outage was a PITA, but survivable (barely😁) I had the same (((shakes)))) but just put it down to MSW not putting a pound/dollar in the electric slot lol. OC. mtaylor, Dave_E, Canute and 5 others 7 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Edwardkenway Posted July 26, 2022 Share #349 Posted July 26, 2022 She's looking great silvered up! Beautiful finish 😊 Yep I experienced the same itchy fingers with MSW down😱 popeye the sailor, Canute, mtaylor and 5 others 7 1 Quote Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED Link to comment Share on other sites More sharing options...
Egilman Posted July 28, 2022 Author Share #350 Posted July 28, 2022 On 7/26/2022 at 5:16 AM, Canute said: Yeah, the outage was a PITA, but survivable (barely😁) On 7/26/2022 at 10:00 AM, Old Collingwood said: I had the same (((shakes)))) but just put it down to MSW not putting a pound/dollar in the electric slot lol. OC. Yep barely.... {chuckle} but then again I've been a bit under the weather as well for the last couple of days so it wasn't good all-round... anyway all's good for now... popeye the sailor, Dave_E, mtaylor and 3 others 6 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Egilman Posted July 28, 2022 Author Share #351 Posted July 28, 2022 On 7/26/2022 at 1:15 PM, Edwardkenway said: She's looking great silvered up! Beautiful finish 😊 Yep I experienced the same itchy fingers with MSW down😱 Thanks Ed, I just finished the touchups and demasking the canopy, ready for The coat of future.... Pics in a few.... CDW, popeye the sailor, Canute and 4 others 7 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Egilman Posted July 28, 2022 Author Share #352 Posted July 28, 2022 Short update Brothers.... Touchups are done, and I de-masked the canopy.... Hi Flash... No Flash... I think she certainly looks the part.... (and looks like a missed a couple of touchups) {chuckle} Easy enough fix.... Onward.... Dave_E, Edwardkenway, Jack12477 and 10 others 13 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Old Collingwood Posted July 28, 2022 Share #353 Posted July 28, 2022 That looks splendid brother. OC. Edwardkenway, king derelict, Jack12477 and 5 others 7 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Egilman Posted July 29, 2022 Author Share #354 Posted July 29, 2022 Thank you OC, It's appreciated... popeye the sailor, Old Collingwood, Edwardkenway and 2 others 5 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Egilman Posted July 29, 2022 Author Share #355 Posted July 29, 2022 (edited) Well progress is going slow but I'm making progress... First coat of future is down and I've painted out the bays, Interior Green is the specified color... I also put the Pewter on the gun ports and tail support... Just pulled the masking and waiting for it to dry before I buff it out.... Looks to me like it is close to an accurate shade of polished steel, but we will know for sure once it's rubbed out and in the sunlight... I've got some RnB Ebony coming, (if it ever gets here) to do the inside of the tail pipe and aft shroud..... Anyway It may be going slow, but it is going... {chuckle} Onwards!!! Edited July 29, 2022 by Egilman Jack12477, mtaylor, Canute and 5 others 8 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
king derelict Posted July 29, 2022 Share #356 Posted July 29, 2022 That looks excellent, Egilman Forgive a stupid question. Did you mask on the Future coated rub n buff? Alan Dave_E, Edwardkenway, Egilman and 4 others 6 1 Quote Link to comment Share on other sites More sharing options...
Egilman Posted July 29, 2022 Author Share #357 Posted July 29, 2022 Thanks Alan... yes directly over the Future with frisket tape... (the frisket tape is the same orange tape you can get at Hobby Lobby) It gives a good clean edge.... Every bit as good as Tamiya tape.... And there are no stupid questions my friend.... Dave_E, mtaylor, Canute and 5 others 7 1 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
lmagna Posted July 30, 2022 Share #358 Posted July 30, 2022 5 hours ago, Egilman said: And there are no stupid questions Obviously you have not heard some of mine. Canute, popeye the sailor, Jack12477 and 7 others 3 6 1 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Egilman Posted July 30, 2022 Author Share #359 Posted July 30, 2022 {chuckle} Since I hold the strong belief brother that there is no such critter as a stupid question, Lou, I really don't think I'm ever going to hear one either... Although I do appreciate the sentiment my friend... But I will apologize for my somewhat oscinine commentary at times... (I never got accepted to miss Bedilia Trulane's charm school, (I wouldn't have graduated anyways) she considered me too obtuse) Any question you may decide to ask is welcome here... (hopefully I'll have a somewhat incisive answer) popeye the sailor, mtaylor, Edwardkenway and 2 others 4 1 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Egilman Posted July 30, 2022 Author Share #360 Posted July 30, 2022 Well another short update, basic finishing is done, and I got her out in the sunshine for a few pics.... I'll let them speak for themselves... Time for decals.... The highlighted panels don't wash out in bright sunlight, they should have been a tad darker, but they are very close to the look I was trying to achieve.... Next up, Decals, they will be coming from the Kinetic set for the subject aircraft and from Print Scale for the technical stencils... There are a lot of them.... And the mail just told me my RnB order arrived at my mailbox a minute ago... I now have everything to finish this bird.... Onwards my friends... (and please tell me what you think of the completed finish, your opinions are very valuable to me my friends) Edwardkenway, Jack12477, ccoyle and 6 others 7 2 Quote Current Build: F-86F-30 Sabre by Egilman - Kinetic - 1/32nd scale In the Garage: East Bound & Down, Building a Smokey & the Bandit Kenworth Rig in 1/25th scale Completed: M8A1 HST 1930 Packard Boattail Speedster M1A1 75mm Pack Howitzer F-4J Phantom II Bell H-13's P-51B/C Temporary Suspension: USS Gwin DD-433 F-104C Starfighter "Blue Jay Four" 1/32nd Scale Terminated Build: F-104C Starfighter ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Quote: "Relish Today, Ketchup Tomorrow" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.