Jump to content

HMS Montague 1779 by garyshipwright - 74-gun Alfred-class


Recommended Posts

Gary,

 

Long before Model Ship World was started, I have been following your  built for a long long time and it has been a treat. Thanks for sharing during so many of the steps along the way.

 

Allan

PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series.   Click on http://trafalgar.tv   There is no cost other than the 30 seconds of your time.  THANK YOU

 

Link to comment
Share on other sites

 

 

Many thanks for this terrific re-run of your log, Gary. It is an inspiration to all builders of accurately framed and detailed models on this site.

I second druxey's observation. Your work continues to inspire me.

 

Mark

Link to comment
Share on other sites

Thanks every one. Seems I have been a little distracted with other things, such as life in general and figure I needed to add another up date. This time its with the bulkheads in the hold. There was a total of only four in Montagu hold starting with the bulkhead that separated the magazine. Going aft one runs in to the bulkhead that enclosed the front part of the spirt room, followed by the fish room and finally the bread room. Wish I had installed some barrels in the hold along with some pig iron and gravel that they would of used to steady the ship. One item that one should be able to make out is the pillars underneath each of the orlop beams. Do hope you enjoy the photos.

Gary

post-264-0-50943400-1364702983_thumb.jpg

post-264-0-74594500-1364703017_thumb.jpg

 

 

post-264-0-60278200-1364703104_thumb.jpg

Link to comment
Share on other sites

Link to comment
Share on other sites

 

Hi Gary,

 

This is a great way to go back and revisit details that were long covered up by later work. It is a great reminder of your excellent craftsmanship and attention to detail, including in the research!

 

Mark

Link to comment
Share on other sites

Thanks Guys. Here's another update and this time we head back fwd on the forward store rooms. It does look a little confusing, but have added a layout of her store rooms. If any of you have any question's but take a look in Peter Goodwin book the sailing man of war, page 113 fig 4/2. A couple of items in his drawing and Montagu are diferent. Item-A is really the scuttle going down to the main magazine. He call's it the cartridge scuttle which was really on the port side across from the scuttle going down to the main magazine and access to this was in the passage way to the light room. Enjoy the photo's

post-264-0-99667500-1364867533_thumb.jpg

post-264-0-62133500-1364867595_thumb.jpg

post-264-0-61283100-1364867639_thumb.jpg

post-264-0-48333700-1364867738_thumb.jpg

post-264-0-00651400-1364867845_thumb.jpg

post-264-0-84647600-1364867889_thumb.jpg

post-264-0-49093100-1364867984_thumb.jpg

post-264-0-47398800-1364868027_thumb.jpg

Link to comment
Share on other sites

Greg,

  You need to be certified.  It is a shame that half of your beautiful work will never be seen once yur model is done.  Do you prefer a padded cell or a nice workshop?

David B.

Link to comment
Share on other sites

Link to comment
Share on other sites

Lovely to see all that very fine detail work in your build Gary. Always a pleasure to view.

 

Regards,

Bill

Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley

Current build: Sovereign of the Seas 1637

My Book: Carving Ornamentation for Ship Models  

Website: Http://carvingbook.weebly.com/

Link to comment
Share on other sites

Gary, how did you cut your steps in the stern deadwood? mill or by hand? do you have any photos showing the process?

 

Guy

Your very welcome Ron and thank you Joe. Here are some photo's of her keel, stem, stern post and deadwood along with her apron and building board. A couple of the photo's show the templates that were used to construct the parts and pieces.

Cheers, Guy
The Learner
Current Member NRG,SMA

 

Current Build: HMS Triton 1:48 on line

 

 

 

Link to comment
Share on other sites

Hello every one and thank you very much. Sorry about not getting back to you sooner. Hi Guy. Seems my log is a whole lot shorter sir and seems that I didn't put in any photo's of building up the stern dead wood. I do have photos showing the templates of the parts and pieces and how her stern deadwood was mounted in a groove that was milled in to the last piece of her keel. there was a male part to this cut on to the bottom of the dead wood itself to help me align this so it would be center on her keel. Hope you enjoy them sir. Seems I just may have to look and see what other items I may of missed in rebuilding her log and thanks Guy for letting me know about this one.

post-264-0-32163600-1365368847_thumb.jpg

post-264-0-63891800-1365368903_thumb.jpg

post-264-0-06173100-1365368944_thumb.jpg

post-264-0-23015900-1365368964_thumb.jpg

post-264-0-51216300-1365369006_thumb.jpg

post-264-0-21831700-1365369031_thumb.jpg

post-264-0-46309600-1365369087_thumb.jpg

post-264-0-97082800-1365369127_thumb.jpg

post-264-0-78802800-1365369177_thumb.jpg

post-264-0-54135700-1365369222_thumb.jpg

Link to comment
Share on other sites

Fascinating as always, Gary.  Just curious.. how difficult was it to get both sides the same?  Or was it a function of close and not exactly the same?

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

  • 2 weeks later...

Hi Gary,

 

I miss the images of your Alfred so much. Especially this one of the Main Wales. I know you are showing the detail that I need at your images.

Where the Main Wale is ending at the Stern is the detail that I need at the moment.

Could  you show the Images in your log please? It will be a great help for me.

Actually I am building the Leopard 1790 and I believe there were very similar to your Alfred about the planking

I looking forward to see more of your fantastic model

 

Kind Regards

Juergen (Newbie at MSW 1.0)

Edited by jaerschen
Link to comment
Share on other sites

Hi Mark. As far as getting both sides even, the template helped with that plus lines that were marked across the top of it. Believe it or not that was one of the items that worried me the most and after carefully marking it out worked out fine.

 

Thanks Joe. Have been a little slow at posting due to life getting in the way along with the Honey dues, such as flowers and yard work. One must keep the misses happy which in turns keeps me happy. ;o)

 

Hi Juergen. Sorry about the delay sir and thanks for your kind words. Here is a couple of photo's and hope they help you on the wale at the counter. Hoping I get around to posting more in the very near future. Gary

 

 

DSC_0847.JPG

DSC_0845.JPG

DSC_0846.JPG

Link to comment
Share on other sites

Gary all I can say is animaatjes-applaus-67233.gif

 

She is coming along beautifully.

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Thank you very much Gary.

Perfect, That are the photos that I need.

 

 

Hoping I get around to posting more in the very near future. Gary

I hope them also because I can see more photos of that great model

Link to comment
Share on other sites

]Thanks every one, your kind words mean a lot. Here is another update on the Orlop deck going aft from the forward store rooms. One item you will noticed is the fore jeer capstan step that was fitted between the forward and aft sail rooms. Reason for the this was to enable the fore jeer capstan to be lowered down to the orlop deck making room for the long boat on the upper deck above. You will also noticed the hanging magazine, which was used to hold cartridges for  some of the upper deck guns. The cartridges were made up in the magazine  and then moved to the hanging magazine until needed. One of the things about this was that it was constructed to hang below the orlop deck, which I believe to keep the cartridges dry. Other items that you will noticed is the cable tier and a couple of photo's show how the grate was made to fit between the pillars, which help to keep the anchor cable contained. One will also see the shutters above the well that would some what help air flow around the timber's in a very wet area in Alfred's hold. Any question just ask away. Gary

 

 

looking fwd on the orlop deck

post-264-0-04825100-1366939876_thumb.jpg

post-264-0-64964700-1366939905_thumb.jpg

post-264-0-27740600-1366939980_thumb.jpg

post-264-0-26835800-1366940081_thumb.jpg

post-264-0-97334900-1366940130_thumb.jpg

post-264-0-62235100-1366940175_thumb.jpg

post-264-0-42706800-1366940244_thumb.jpg

post-264-0-83406600-1366940272_thumb.jpg

post-264-0-11634400-1366940415_thumb.jpg

Edited by garyshipwright
Link to comment
Share on other sites

Gary, your work has been an inspiration to me. Thanks for reposting these pictures again.

 

Ed

Link to comment
Share on other sites

Just great. Wonderful work. I am impressed

cheers    :cheers:

 

Robert

 

 

And when the workaholic grabs me, I sit quietly in a corner and wait until the attack is over

 

Into dockyard:   HMY Royal Caroline 1749 made from Bone

                        74 Gun-ship 1781 (engl.) Admiralty Model M 1:50 by M. Stalkartt

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...