Jump to content
NRG/MSW WEB STORE SALE - DON'T MISS OUT! - ONLY 5 DAYS REMAIN! ×

dgbot

Gone, but not forgotten
 View Profile  See their activity

  • Posts

    3,993

  • Joined

  • Last visited

 Content Type 

Everything posted by dgbot

  1. dgbot
    Your ports and sills look perfect and the straight edge you used was a stroke of genius. David B
  2. dgbot
    That really looks good Nenad. David B
  3. dgbot
    Terrific paint job Nils. She is really looking like a grand lady. David B
  4. dgbot
    Congratulations on a quick recovery. David B
  5. dgbot
    Moving along Dan. Treat that tool with the respect it deserves. More people are hurt using table saws than any other tool. When I was still workng two years ago an employe at our Des Moines plant cut off his fingers using one. I am not sure how it happened but when I used on I treated with great care and used push blocks for all the work. Nice David B
  6. dgbot
    Chuck, if you have a vice use that to hold the strip while you are shaping the plank. Take your time as the stuff supplied in most kits leave much to be desired. If you are lucky enough to have a Woodcraft nearby that would be great in that their veneers are top notch. David B
  7. dgbot
    Sounds like you are in for an adventure in Ship modeling. Have a good time and keep the peanut gallery open please. David B
  8. dgbot
    Great tip Michael that is a keeper. David B
  9. dgbot
    That was what my Dr. told me as well. David B
  10. dgbot
    I echo everyone else Bob, a lovey shape. Are you going to stain or paint her? David B
  11. dgbot
    I pray that your loved one heals soon. Because of my problems I have a fracture in my lower back and understand pain pills. They come in handy when needed but I will not get behind a wheel or operate a machine when I take one. The biggest drawback is basically what you used to take for granted no longer works for you and you feel helpless. David B
  12. dgbot
    Nice work Dave and am happy that you are doing okay. Question I like the look of hard maple but have never planked with it. How pliable is it or is it on the brittle side? David B
  13. dgbot
    I picked up a Sherline years ago and have added collets and a jewelers tool rest with it both are very useful. David B
  14. dgbot
    Using modeling clay is a very good idea Peter thanks for the heads up. David B
  15. dgbot
    Nothing wrong with furled sails. To make the bundle closer to scale just remove half the sail and furl it. Experiment and take a look at ships with their furled sails to get an idea for what you are going to do. David B
  16. dgbot
    Like Danny said to much deflection needing either steady or follower rest. Plus I use and independent 4 jaw chuck for the odd shapes I get into. It depends on what I am doing and the material and the thickness of the part. As the old saying goes there are many ways to skin a cat. David B
  17. dgbot
    Measure and compare it to the plans and alter to match the plans. David B
  18. dgbot
    Use a plane or a knife and shave the corners into an octagon. Then smooth it out and start over again. Time consuming but you do not have to worry about the deviation in a lathe. I have also used a moto tool to round it out as well. David B
  19. dgbot
    I use to go to a model railroad shop and pick up a spool of black annealed wire so I did not have to blacken it. The stuff works great for stropping blocks and other metal work. I believe you can buy it where they sell beading supplies. Michaels or Hobby Lobby would probably have it. David B
  20. dgbot
    Making a mast on a lathe can be frustrating. The easiest way is to use a plane and a fixture. You have better control and it is safer and more accurate. A self centering 4 jaw is defeating the purpose. I have an independent 4 jaw that is used for irregular shapes etc. David B
  21. dgbot
    Looks good Patrick what about a red or white stripe along the hull to contrast with the black? David B
  22. dgbot
    Nice looking hinge. David B
  23. dgbot
    A wonderful job of rigging Frank beautiful and uncluttered. David B
  24. dgbot
    My brother in law packed up all of my power tools so I have not seen my lathe for a long time. I used Turtle Wax after cleaning it with WD40. I do not have the strength at the moment to dig it out for a look see. At work we used 10w30 on the ways on the lathe there and that did the job. When I get the strength to open my case I will be looking at this wax. David B
  25. dgbot
    Fantastic work . David B

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...