Bluto 1790 Posted December 14, 2020 #241 Posted December 14, 2020 Such luxurious cabins !!! I want to sail on this ship when she is finished! When I see work of this standard I feel I should cancel my membership of the forum. A-M-A-Z-I-N-G ! FrankWouts, Tony Hunt and mtaylor 3 Quote Jim. I cut it twice . . . . . and it's still too short! HMS Leopard 1790; scratch build 1:80 PoB Cross Section - HMS Leopard 1790 - 1:44
daniel.b Posted December 15, 2020 #242 Posted December 15, 2020 I make also the Gros Ventre. Yours is very beautiful, you make a good job. mtaylor and FrankWouts 2 Quote
glbarlow Posted December 19, 2020 #243 Posted December 19, 2020 Amazing detail and quality, museum ready. mtaylor and FrankWouts 2 Quote Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose
marsalv Posted December 21, 2020 Author #244 Posted December 21, 2020 Thank you guys for all likes and nice comments. The next task on the gundeck were trunks (or chests?). johnp76, FriedClams, JpR62 and 34 others 36 1 Quote
druxey Posted December 21, 2020 #245 Posted December 21, 2020 Love the details of the locks! Terrific work. mtaylor, FrankWouts, PeteB and 1 other 4 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
No Idea Posted December 21, 2020 #246 Posted December 21, 2020 Just simply incredible work - WOW!!! FrankWouts, FriedClams and mtaylor 3 Quote
daniel.b Posted December 21, 2020 #247 Posted December 21, 2020 Yes, I like. mtaylor, FriedClams and FrankWouts 3 Quote
JpR62 Posted December 21, 2020 #248 Posted December 21, 2020 What a magnificent work ! mtaylor, FriedClams and FrankWouts 3 Quote Jean-Paul 'You are not carving a bear with a chain saw here folks', Chuck Passaro, ´Queen Anne Style Barge´ manual of instructions Current builds : Medway Longboat 1742 - Syren Ship Model - 1:24 HM Cutter Cheerful 1806 - Syren Ship Model Company - 1:48 Santa Maria boat 1492 - Korabel (Ukraine) - 1:24 Captain John Smith's shallop - Korabel (Ukraine) - 1:32 Finished build : Queen Anne Barge - Syren Ship Model - 1:24 Armed Virginia Sloop - Model Shipways - 1:48 Batelina - MarisStella - 1:10 Next on list : HMS Winchelsea 1764 - Syren Ship Model - 1:48
marsalv Posted December 28, 2020 Author #249 Posted December 28, 2020 Hatchways. CaptMorgan, dvm27, Siggi52 and 27 others 30 Quote
Alex M Posted December 28, 2020 #250 Posted December 28, 2020 Incredible details, marsalv! True Masterpiece! FrankWouts, druxey and mtaylor 3 Quote Current build: HMS Sphynx, 20 gun ship launched in 1775 at Portsmouth, Hampshire. On the drawing board: HMS Anson, 64 gun third rate ship of the line, launched in 1781 at Plymouth
Ainars Apalais Posted December 31, 2020 #251 Posted December 31, 2020 I can only agree with Alex "True Masterpiece" druxey, FrankWouts and mtaylor 3 Quote
marsalv Posted January 2, 2021 Author #252 Posted January 2, 2021 Thank you Alex M, I have to say I learned many things from you. Forecastle and quarter deck beams preparation - hatchway openings, capstan steps and mast wedges. Rudolf, PeteB, druxey and 32 others 34 1 Quote
Hubac's Historian Posted January 3, 2021 #253 Posted January 3, 2021 Well, I won't miss out on this work of art! I'm a little late to the party, but there still seems to be plenty of build ahead. All of the smallest attention to detail is so lovely and perfectly rendered. You're giving ArchJofo a run for his money in the Chandlery. FrankWouts 1 Quote We are all works in progress, all of the time.
Hubac's Historian Posted January 3, 2021 #254 Posted January 3, 2021 Wow, Marsalv - what a talent you are! I'm just completely blown away by all of it. This is truly inspiring stuff! I particularly like your cut-aways. I have never seen anyone else approach it in quite this way; you seem to have maximized the long-view through the ship, in places, while adding a uniquely a-symmetrical artistic flair to the openings. It is all just so good. The lead-lined manger is just perfection, from my point of view. FrankWouts, mtaylor, Tony Hunt and 1 other 4 Quote We are all works in progress, all of the time.
marsalv Posted January 23, 2021 Author #255 Posted January 23, 2021 To Hubac´s Historian - Thanks for compliment. I still have some rest at the stern - decorations. marktiedens, Louie da fly, cotrecerf and 30 others 31 2 Quote
Louie da fly Posted January 23, 2021 #256 Posted January 23, 2021 Beautiful, beautiful work! Steven J11, PeteB, mtaylor and 1 other 4 Quote It's not really a ship model unless you've bled on it. CURRENT BUILDS Golden City - Ballarat paddlewheeler La Lomellina - Theoretical Reconstruction of a Genoese carrack sunk in 1516 FINISHED Venetian merchant Ship from Basilica of San Marco Australian couta boat RMS Titanic HMVS Cerberus 11th century Byzantine dromon Winchelsea Nef - Late 13th century Mediaeval ship Henry Grace a Dieu - Rebuild of 1:200 model I started in 1967 Mistydeefer - restoration of decor model yacht
daniel.b Posted January 23, 2021 #257 Posted January 23, 2021 You sculpt very well, your tools are very tapered. FrankWouts and J11 2 Quote
druxey Posted January 23, 2021 #258 Posted January 23, 2021 Very nicely realised scrollwork, Marsalv! J11, FrankWouts, Hubac's Historian and 1 other 4 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
PeteB Posted January 24, 2021 #259 Posted January 24, 2021 Hi Marsalv - Just been catching up and was about to say that every time I look in the work keeps getting better and better but realized that isn't the case your work has been at this extraordinary level of precision right from the start. I don't often have cause to say this, but for me I genuinely find your build inspiring and/or aspiring (not sure of my english here) even though I have no illusions of being able to replicate the same result - thank you. One question if I may ? in your earlier post you show your plank caulking method - is it thin card stock you are using or are they very thin hornbeam strips ? I'll keep you from your work no longer - Stay safe - Cheers Pete On 3/27/2020 at 7:44 PM, marsalv said: Some deck details - inner waterways, binding strake, carlings and ledges. Bluto 1790, druxey, archjofo and 2 others 5 Quote
marsalv Posted January 29, 2021 Author #260 Posted January 29, 2021 To PeteB: I used the black translucent paper for the caulking. The last stem decorations are added. All carvings are made with CNC milling maschine with small manual corrections. EricWilliamMarshall, Ainars Apalais, popash42 and 26 others 27 1 1 Quote
scrubbyj427 Posted January 29, 2021 #261 Posted January 29, 2021 Stunning work! J11, oneslim, bruce d and 1 other 4 Quote Current Builds: HMS Winchelsea 1764 1:48 - 5th rate 32 gun frigate (on hold for now) HMS Portland 1770 Prototype 1:48 - 4th rate 50 gun ship
JpR62 Posted January 29, 2021 #262 Posted January 29, 2021 A magnificent work and a perfect mastery of the different techniques. It is superb! oneslim, J11 and mtaylor 3 Quote Jean-Paul 'You are not carving a bear with a chain saw here folks', Chuck Passaro, ´Queen Anne Style Barge´ manual of instructions Current builds : Medway Longboat 1742 - Syren Ship Model - 1:24 HM Cutter Cheerful 1806 - Syren Ship Model Company - 1:48 Santa Maria boat 1492 - Korabel (Ukraine) - 1:24 Captain John Smith's shallop - Korabel (Ukraine) - 1:32 Finished build : Queen Anne Barge - Syren Ship Model - 1:24 Armed Virginia Sloop - Model Shipways - 1:48 Batelina - MarisStella - 1:10 Next on list : HMS Winchelsea 1764 - Syren Ship Model - 1:48
dvm27 Posted January 31, 2021 #263 Posted January 31, 2021 I think that once commercial kit makers become as skilled as Masalv and Chuck are at CNC carvings the hobby will be changed forever...in a good way. EricWilliamMarshall, J11, druxey and 1 other 4 Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752
druxey Posted January 31, 2021 #264 Posted January 31, 2021 It's a matter of taste. Somehow, to me, machine carvings lack a certain quality that the hand-carved pieces have. They are, perhaps, a little too perfect. Also, the surface finish of a machine tool gives a different surface finish to that of the burnishing produced by an edge tool. dvm27, J11, EricWilliamMarshall and 3 others 6 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
claybaker Posted February 6, 2021 #265 Posted February 6, 2021 I was so happy to find this build log. I too have her monograph sitting on my shelf. Trying to decide whether to build her or Warrior next. Clay mtaylor 1 Quote
Koopyetz Posted February 6, 2021 #266 Posted February 6, 2021 Marslav There are many creative individuals on this forum but among them are those that exist at the highest level of ability and craftsmanship. Amazing. mtaylor and J11 2 Quote
garyshipwright Posted February 7, 2021 #267 Posted February 7, 2021 (edited) On 1/29/2021 at 5:26 AM, marsalv said: To PeteB: I used the black translucent paper for the caulking. The last stem decorations are added. All carvings are made with CNC milling maschine with small manual corrections. Hi Marsalv. Have a question for you. What program are you using for doing your carvings? I just may purchase the same one. At the moment am looking at V Carving which might be the route for me to go. Thank you and keep up the outstanding work. Gary Edited February 8, 2021 by garyshipwright PeteB, JOUFF, mtaylor and 2 others 5 Quote HMS Montague/Alfred class by Gary B 74 gun ship built in 1779
marsalv Posted February 10, 2021 Author #268 Posted February 10, 2021 Thank you guys for all likes and comments. I understand that for some people, the use of CNC machines is a somewhat controversial topic. On the other hand, I remember how I started modeling about 40 years ago with a hand saw and a set of files. Today, no one dares to use various electrical devices that make it easier for us modelers to work. From this point of view, the CNC machine is just another evolutionary step. To garyshipwright: I am using VCarve Desktop. I am starting work on main capstan parts - some pictures from production. Edwardkenway, Hubac's Historian, Jorge Diaz O and 20 others 22 1 Quote
Hubac's Historian Posted February 10, 2021 #269 Posted February 10, 2021 (edited) Whether it’s handwork with traditional tools, or working with technology - engineering the process for producing the results is always the greatest challenge, IMO. The results you are getting with CNC are superb, but the machines will only do what you tell them to. Your talent as a maker of fine things is abundantly clear, even if the means of expressing it is less familiar to most, including myself. Edited February 10, 2021 by Hubac's Historian No Idea, mtaylor, druxey and 1 other 4 Quote We are all works in progress, all of the time.
No Idea Posted February 10, 2021 #270 Posted February 10, 2021 The results speak for themselves and I see a masterclass in CNC programming. It must be so difficult to work out all of the cutting passes and just how to hold the piece which probably needs turning around. How you work out the datum on something like that is incredible. This is an art in itself and more than likely the future of model ship building. I just wish that I could do it to be honest PeteB, mtaylor, Dowmer and 1 other 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.