druxey Posted November 24, 2015 #1231 Posted November 24, 2015 Good to read of Judy recovering. Making hinges on a snowy day is good therapy as well. They look terrific. I have some miniature burrs that I use as countersinks. Do you have such things? Piet, Jack12477, mtaylor and 6 others 9 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
michael mott Posted November 24, 2015 Author #1232 Posted November 24, 2015 Thanks everyone. Druxey I had not thought of burs probably because they really have not been part of my modelwork tool chest agency. I shall have to look into what is available from the jewelers tool shop in Edmonton when I have a few pennies to spare. I do have a Dremel with a flex shaft, but mostly it never occurs to me to use it. Perhaps I should do a bit of out of the box thinking and plug it in occasionally. PS it is still snowing traffic is evidently rather snarly in Edmonton till this system passes. Michael Piet, mtaylor, Jack12477 and 3 others 6 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
druxey Posted November 24, 2015 #1233 Posted November 24, 2015 There's always ordering on the Internet if the drive is too iffy! Piet, mtaylor, Omega1234 and 2 others 5 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
michael mott Posted November 25, 2015 Author #1234 Posted November 25, 2015 Again Thanks for all the positive support and likes. I mounted the hinges today first on the ridge. small awl first made a location for the drill and then drilled with the #68 drill mounted in a pin chuck to drill the holes then one of the rivets pushed home. Once all the hinges were mounted I used tiny drops of thicker ACC glue Gorilla brand to temporarily hold the hinges onto the lights I will wait till the morning before opening them to add the rivets to them once they have set. The blue tape is just to hold them overnight from sliding until the glue completely hardens. Michael SailorGreg, IgorSky, Omega1234 and 23 others 26 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Jim Lad Posted November 25, 2015 #1235 Posted November 25, 2015 Class! John mtaylor, Omega1234, michael mott and 2 others 5 Quote
NenadM Posted November 25, 2015 #1236 Posted November 25, 2015 Sweet. Masterpiece. I like it!!! michael mott, Dimitris71, Omega1234 and 2 others 5 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic
pete48 Posted November 25, 2015 #1237 Posted November 25, 2015 (edited) Very nice, looks fantastic Best Regards, Pete Edited November 25, 2015 by Pete48 Piet, mtaylor, Dimitris71 and 2 others 5 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
Mirabell61 Posted November 25, 2015 #1238 Posted November 25, 2015 excellent Fitting on that Skylight Michael, a wonderful model work of wooden and metal parts Nils mtaylor, Omega1234, Dimitris71 and 2 others 5 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
captainbob Posted November 25, 2015 #1239 Posted November 25, 2015 Beautiful light, Michael. Bob michael mott, mtaylor, Omega1234 and 2 others 5 Quote Every build is a learning experience. Current build: SS_ Mariefred Completed builds: US Coast Guard Pequot Friendship-sloop, Schooner Lettie-G.-Howard, Spray, Grand-Banks-dory, a gaff rigged yawl, HOGA (YT-146), Int'l Dragon Class II, Two Edwardian Launches In the Gallery: Catboat, International-Dragon-Class, Spray
dvm27 Posted November 25, 2015 #1240 Posted November 25, 2015 Making a working hinge that looks exactly to scale is very impressive, Michael. Your work continues to inspire. michael mott, mtaylor, Omega1234 and 2 others 5 Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752
Jack12477 Posted November 25, 2015 #1241 Posted November 25, 2015 Beautiful skylight Michael. Impressive scale hinges also. I envy your skill. mtaylor, Dimitris71, Piet and 2 others 5 Quote Jack "No one is as smart as all of us" - Is ón cheann a thagann an cheird The craft comes from the head --------------------------------------------- Current build: US Constellation Non-ship builds: USCG UH-65A Dolphin M16 Multi-gun motor carriage diorama M4A3 Sherman Tanks dioramas 1936-1939 Mercedes Benz 540K 1934 Rolls-Royce Phantom II JSDF Light Armor Vehicle Figures: The Last Bridge: Raider Reaper Edge of Universe: Ianis The Last Bridge: Vadim with cart Completed build log(s): 18th Century Longboat , Marie Jeanne, Willie L Bennett 1888 50 ft Gaff-rigged Ice Yacht Scratch Build The Sullivans (DD 537) Liberty Ship SS John W Brown USS England (DE 635), Artesania Latina Titanic Lifeboat Gallery: Swift , Armed Virginia Sloop, Santisima Trinidad Captain's Launch , 18th Century Longboat , Marie Jeanne Other: Rhinebeck Aerodrome Tour
Omega1234 Posted November 25, 2015 #1242 Posted November 25, 2015 Just marvellous!!! mtaylor, Dimitris71 and Piet 3 Quote MY SCRATCH BUILT MODELS ARE: Splendid Mega Yacht https://modelshipworld.com/topic/28576-splendid-by-omega1234-scale-1500-mega-yacht/ Majestic Mega Yacht https://modelshipworld.com/topic/28483-mega-yacht-majestic-by-omega1234-miniature/ Sapphire Mega yacht https://modelshipworld.com/topic/21088-sapphire-by-omega1234-1388-scale-mega-yacht-66m-8-inch-hull-length/?tab=comments#comment-639898 Genesis - Supersports Mega Yacht https://modelshipworld.com/topic/18168-genesis-by-omega1234-1300-49m-mega-yacht-8-inches-long-finished/?tab=comments#comment-559026http://modelshipworld.com/index.php/topic/14141-shadow-by-omega1234-scale-1300-luxury-60m-mega-yacht-8-inches-long/ SHADOW Luxury Motor Yacht http://modelshipworld.com/index.php/topic/11384-majellan-by-omega1234-luxury-37-metre-motor-yacht-miniature-7-inches-approx/ Majellan Luxury Motor Yacht http://modelshipworld.com/index.php/topic/9261Rainbow-j-class-racing-yacht/?p=273543 Rainbow J Class Racing Yacht Mystic Classic Motor Cruiser Symphony Ingomar Schooner: Scratch build Dorade Schooner: <p> Lennox Restoration Warship http://modelshipworld.com/index.php/topic/9577-pandora-cutaway-dockyard-style-miniature/?hl=pandora
popeye the sailor Posted November 26, 2015 #1243 Posted November 26, 2015 again, your metal work astounds me.......hinges look really neat! skylight is looking great! didn't know Judy was in the Hospital........so sorry to hear. I hope she is doing better and on the road to recovery. snow.........oh, the word be deaf to thy ears.........we haven't seen it yet. Piet, Dimitris71, mtaylor and 1 other 4 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch
michael mott Posted November 26, 2015 Author #1244 Posted November 26, 2015 Thanks for all the positive comments and likes they are really appreciated. I just got home from the Hospital, Judy is improving. This morning i had a little time before heading into Edmonton to work on the skylight. I created a crude jig on a sheet of paper with a couple of blocks stuck down with some masking tape. This was to enable working on the light while temporarily attached with the glue. When the lights were opened up one of the temporary glue joints let go so I started the hole drilling with the hinge that was still glued to ensure that the position of the light remained fixed relative to the ridge and central divider between the lights. Because of the set up angle I was able to drill the holes for the rivets in the lights. The rivets were pressed in and then glued with some thin Acc glue After completing the lights on the first side I set it up to see how they looked......not good they did not sit down fully This was one of those moments that had intuitively crossed my mind earlier when making the slots for the hinges in the top ridge. one of the thoughts was to set the hinges into the ridge the full depth of the folded hinge to eliminate the hassle of getting the notches perfect on the lights. It also allowed the lights to seat up fully well almost fully to the ridge. The thing that I had completely failed to really understand was the minute amount of the rivet heads was enough to prevent the hinges from fully closing....what to do? the hinges were set with pins and glued. I decided to deal with this later and made a change with the second side. The change involved setting up the lights so that the hinges could be mounted so that from the top when the light were closed thee looked clean, but that they would be slightly open underneath to allow for the heads. The second side was drilled as the first side and the countersinks were made just a little larger then the hinges were unglued with a number 11 blade after marking their positions. Then using the jewelers saw I cut them back at an angle from the topside to the bottom side. then using the #11 I removed the slight wedge and cleaned it up with a needle file. The next pic shows the one on the right has been modified and the one on the left is next to be done. After fitting the first one and testing it to see if my fix would work I was satisfied that it would. Then completed the second one, all that remains is to un-glue the well glued ones that I did first. the next pic shows the lights seated down fully on the second set. Moral of the story... do a test first! but then you all knew that didn't you Michael hexnut, gjdale, Elia and 30 others 33 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
gjdale Posted November 26, 2015 #1245 Posted November 26, 2015 Glad to hear that Judy is improving Michael. Fantastic work on the lights/hinges, but I'm glad you made a mistake - that's actually very encouraging for the rest of we lesser mortals! ggrieco, dgbot, Dimitris71 and 7 others 10 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout
Dimitris71 Posted November 26, 2015 #1246 Posted November 26, 2015 Hello Michael, as a friend wrote to my log: "A man's invention comes from his previous errors". Your skylights looks superb.. A beautiful work Michael. All the best Dimitris michael mott, Mirabell61, dgbot and 7 others 10 Quote Current Build: Amerigo Vespucci -Mantua- 1:100 scale Completed Build logs: Bluenose II AL 1:75 scale Gallery: Bluenose II AL 1:75 scale Future Build: Royal Caroline -Panart- 1:47 scale
dgbot Posted November 26, 2015 #1247 Posted November 26, 2015 I am glad Judy is getting better and your solution to the skylight windows was ingenious. With that redo you gave me hope to increase my skills in miniature joinery. David B Omega1234, Piet, ggrieco and 3 others 6 Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/
pete48 Posted November 26, 2015 #1248 Posted November 26, 2015 Beautiful Butterfly Hatches Michael, They look Amazing, Superb workmanship Best Regards, Pete Mirabell61, Omega1234, michael mott and 4 others 7 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/
Piet Posted November 27, 2015 #1249 Posted November 27, 2015 So very happy to hear that Judy is improving. At times our minds see things work but then the unexpected crops up and we experience the "oh cr-p moment" Good recovery! Hope the already cemented and pinned parts will come off unscathed. Cheers, cog, mtaylor, druxey and 5 others 8 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum)
Remcohe Posted November 27, 2015 #1250 Posted November 27, 2015 It all turned out beautiful in the end. Moral of the story... do a test first! but then you all knew that didn't you Oh yes and "measure twice, cut once" and all the other hard earned lessons we all learned over the years. Still I tend to forget them very quickly and I don't know why. Maybe a shipwright is stubborn, luckily I'm very skilled at redo's ;-) Remco cog, Dimitris71, mtaylor and 4 others 7 Quote Treat each part as if it is a model on its own, you will finish more models in a day than others do in a lifetime. Current build HMS Kingfisher MSW 1.0 log click here
Jack12477 Posted November 27, 2015 #1251 Posted November 27, 2015 Glad to hear Judy is improving. Skylights look great even with the OOPS moment. mtaylor, Piet, Dimitris71 and 1 other 4 Quote Jack "No one is as smart as all of us" - Is ón cheann a thagann an cheird The craft comes from the head --------------------------------------------- Current build: US Constellation Non-ship builds: USCG UH-65A Dolphin M16 Multi-gun motor carriage diorama M4A3 Sherman Tanks dioramas 1936-1939 Mercedes Benz 540K 1934 Rolls-Royce Phantom II JSDF Light Armor Vehicle Figures: The Last Bridge: Raider Reaper Edge of Universe: Ianis The Last Bridge: Vadim with cart Completed build log(s): 18th Century Longboat , Marie Jeanne, Willie L Bennett 1888 50 ft Gaff-rigged Ice Yacht Scratch Build The Sullivans (DD 537) Liberty Ship SS John W Brown USS England (DE 635), Artesania Latina Titanic Lifeboat Gallery: Swift , Armed Virginia Sloop, Santisima Trinidad Captain's Launch , 18th Century Longboat , Marie Jeanne Other: Rhinebeck Aerodrome Tour
cog Posted November 27, 2015 #1252 Posted November 27, 2015 Sorry to hear about Judy, but good to hear she's improving, give her my best wishes. Take care driving though!!! I'm enjoying the build of that skylight tremendously!!! It does look stunning ... the nice thing about an 'end product', people can't see those oops moments, they just see that marvelous build ... mtaylor, Piet, michael mott and 2 others 5 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ...
Bedford Posted November 30, 2015 #1253 Posted November 30, 2015 Great news about Judy Remember that only the pope is supposed to be infallible and as far as I know the Vatican isn't in Canada, glad to know you're mortal dgbot, Piet, michael mott and 3 others 6 Quote Ships built :- Schooner for Port Jackson Thermoplylae Bluenose II Full size Tammie Norrie dinghy 1:8 scale Miss Caroline, model of the full size boat I built Under construction :- Royal Caroline, this one is special as it is in memory of my 13 year old daughter, Caroline who passed away in 2005 Miane three masted schooner R/C, scratch build (on hold) Charles W Morgan (on hold) Scratch designed and built R/C Mahogany and Walnut speedboat (on hold) In the que :- S.T. Waratah, maybe!
michael mott Posted December 23, 2015 Author #1254 Posted December 23, 2015 Thanks everyone for your well wishes for Judy. All is well now. I have to hunt through my scraps of thin lexan for the "glass" in the skylights, I did have some 1/16th cell-cast acrylic that was left over from some architectural models. The interesting thing about cell-cast is because of the nature of the manufacture it is not super consistently even as far as thickness goes varying about 25 thousands over the sheet in random ways. we used to call it thick or thin whatever the main denomination was. The reason I used the cell cast is because It cut much more cleanly without gumming or fracturing the way the extruded acrylic did. So I need to find a bit of thin 1/16th failing that I will buy some new 1.5mm lexan Michael Mirabell61, Jack12477, canoe21 and 5 others 8 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Dimitris71 Posted December 23, 2015 #1255 Posted December 23, 2015 Merry Christmas for you and your family Michael!! All the best Dimitris Piet, Omega1234, Jack12477 and 1 other 4 Quote Current Build: Amerigo Vespucci -Mantua- 1:100 scale Completed Build logs: Bluenose II AL 1:75 scale Gallery: Bluenose II AL 1:75 scale Future Build: Royal Caroline -Panart- 1:47 scale
chippy Posted December 23, 2015 #1256 Posted December 23, 2015 Hi Michael Pleased to hear your good lady is on the mend and will be home for Christmas. I'm don't know what lexon is but for for my windows I use a CD case. I make the windows with a front and back which are identical then make a ply piece which will go between these two which is cut out slightly larger than the window apertures and left open at the top, this allows for the clear plastic to be slid down between the inner and outer sheet. One big advantage of this particularly on wheelhouses is that the whole thing can be painted or stained without getting it on the plastic, it also rules out having to glue them in and avoids the risk of fogging. To both of you and anyone else who reads this Rosemary and I wish you all a very happy Christmas and a fantastic New Year..............Happy building and sailing in 2016. Mike. Dimitris71, druxey, mtaylor and 2 others 5 Quote
Laurence_B Posted December 24, 2015 #1257 Posted December 24, 2015 This really is a very impressive build,Michael! Recently on BBC television (here in the UK) there was a series called "The Boats That Built Britain" Episode 5 covered the Bristol Channel Pilot Cutters. The programme is on youtube and probably the BBCiplayer too. Hope this is of interest. Piet, druxey, mtaylor and 6 others 9 Quote
michael mott Posted December 24, 2015 Author #1258 Posted December 24, 2015 Laurence thank you for your kind words and the link. Michael mtaylor, Dimitris71, Piet and 2 others 5 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
druxey Posted December 24, 2015 #1259 Posted December 24, 2015 Michael and Judy: a very happy Christmas to you both and a healthy New Year ahead. Love checking in on your build! Piet, mtaylor and Dimitris71 3 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
michael mott Posted December 24, 2015 Author #1260 Posted December 24, 2015 Thanks Druxey, and thank you as well Mike for the tip about the CD cases, I shall have a look at that. Michael mtaylor, Piet, Dimitris71 and 1 other 4 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.