Jump to content
Supplies of the Ship Modeler's Handbook are running out. Get your copy NOW before they are gone! Click on photo to order. ×

GrandpaPhil

NRG Member
  • Posts

    5,775
  • Joined

  • Last visited

Everything posted by GrandpaPhil

  1. Thank you very much, Edward! Thank you everyone for all the likes! Ended up making the cat tail from laminated card. I trimmed it with a #10 scalpel blade. I made the shot garlands for the carronades (not glued down, they still need painted). I discovered that I had misinterpreted the plans earlier (I’m still learning) and ripped up hatch covers by the main mast so I could make the bitts properly, which run down to the upper gun deck. I started making the ship’s boats because the first set of them will be needed soon. I am using the ones that the Admiral bought me for Christmas two and a half years ago.
  2. Welcome!
  3. Thank you all for the comments and the likes! Currently working on the shot garlands. The big picture is that I am working on finishing the Upper Gun Deck. However, I am doing the same as before and since I need shot garlands on the spar/quarter decks, I am going to make those too. Thanks for stopping by and stay healthy.
  4. Welcome! I am sorry to hear about your brother. You have my condolences. I have not built either kit, although both look like nice kits. I also enjoy 1/35 armor. I just bought a BT-7 by Zvezda.
  5. The Yankee Hero is coming along nicely. I have only built one solid hull kit myself, a Model Shipways Sultana. The hardest part for me was getting the hull done.
  6. Nicely done! I made my first deadeyes for my Prince de Neufchatel. I used a dowel rod and cut slices after cutting the groove. I drilled the holes last. I keep seeing these yacht America builds. Eventually, I am going to end up building one.
  7. In Bjorn Landstrom’s “The Ship”, there is a two page picture of Victory under full sail that is clear enough and precise enough that I intend to use it to make my sails (I’ll have to modify the dimensions slightly to account for variances between my model and the picture).
  8. Welcome!
×
×
  • Create New...