Roger Pellett Posted May 19 #421 Posted May 19 The museum at Portsmouth, I believe it’s now called the Royal Navy Museum used to have a full sized realistic figure of Admiral Nelson in his full dress uniform. It was arranged so you didn’t see it until you came around a corner. It was quite startling. He appeared to be much smaller than we usually visualize such heroic people. Maybe a Lady Hamilton to keep him company? 😀 Roger Canute, mtaylor, uss frolick and 4 others 7
chris watton Posted May 31 Author #422 Posted May 31 (edited) OK, I have just competed the hull designs for Harpy (1796), now onto masts. Here are a few pics of the (sacrificial) 'pre-prototype', again, used only to check fit of designed parts, so this has really been taken apart and put together a lot. (And is in fact the third of my builds for this) Again, the only planking required will be at the level below the main wale down, with everything above this all pre cut/engraved, including the main wale (this is why they take so long to design) Armament is absolutely typical of this vessel, 16 x 32-Pounder carronades and 2 x 6-Pounder long guns. 64th Scale, as I am sure someone will ask, and a hull length of around 545mm, with a lot of detail.. ETA - The hatch coamings sit on the deck beams and carlings, and not directly onto the deck, and the deck sits directly onto the deck beams, instead of ply sub deck and lime deck, for better scale appearance. Edited June 1 by chris watton mgatrost, JeffT, druxey and 51 others 38 16 Vanguard Models on Facebook
Blue Ensign Posted May 31 #423 Posted May 31 Round-up to the head ledges and gratings👍 B.E. thibaultron, chris watton, hollowneck and 3 others 6 Current Build: Medway-longboat-1742-by-blue-ensign-½”-scale Completed builds: HMS Indefatigable-1794-by-blue-ensign-vanguard-models-1:64-scale HMS Sphinx 1775 by Blue Ensign. 1:64 scale - Vanguard Models Queen-Anne-Royal-Barge-circa-1700-by-Blue-Ensign Fifie fishing boat Lady Eleanor Muirneag-1903-–-a-scottish-zulu-fishing-boat-164-scale-based-on-the-vanguard-models-zulu-kit/ HM Cutter Alert 1777 HM Cutter Cheerful 1806 18th-century-English-longboat-by-Blue-Ensign-ms-148-scale/ 18thc English Pinnace by Blue Ensign-Model-Shipways-1:24 scale/ HMS-Pegasus-by-Blue-Ensign-finished-Victory-Models-1:64-scale/ Heller Seventy-four 1:150 scale - modified Le Superbe/Le Glorieux kit after Boudriot, waterline setting with sails. The schooner Pickle, Jotika pob kit 1:64 scale, my interpretation.
Ronald-V Posted June 1 #424 Posted June 1 (edited) That's amazing! My guess this will be a top seller Edited June 1 by mugje Canute, mtaylor and thibaultron 3 Currently working on the HMS Sphinx from Vanguard Models
chris watton Posted June 1 Author #425 Posted June 1 28 minutes ago, mugje said: That's amazing! This will be a top seller I guess Cheers, I never know until they go on sale. The last time I did an 18-gun brig was 25 years ago, so I wanted to make sure this one's a little more special and not a rehash of what I have done before. I do try to implement stuff I have thus far learned from previous designs, and also take on board constructive criticism of certain aspects. Harpy will be the latest iteration of that learning curve - plus I wanted to do this little fighter justice, being the longest served of her class and the most widely travelled, in action from the French Revolutionary to the end of the Napoleonic Wars. Plus she has great lines, being not nearly as 'Flat' as the Cruiser Class, but more like an much larger Speedy Class, lines wise. When I started this, my first stipulation to myself was that I wanted to include a stove. This meant that I would need to show the lower deck, so the model also has scale upper deck beams (4mm thick pear) and adding more lower detail, which does increase the material count by quite a margin. The deck planking pattern is actually copied from an original copy of a Cruiser Class deck plan, which includes the deck planking lines. As per usual now, anything directly glued to the inner and outer bulwarks have slots for their respective positions, eliminating the need to measure where they go, and because they are slotted as well as glued, the channels and pin racks are very strong and secure. I did make one change from the original plans, and that was to add stern davits, as I have a painting of her showing these, and I have no doubt these would have been added at some point in her long career. I will include at least one 3-d printed cutter, perhaps two, one for the deck and one for the stern davits. (Modeller can always leave the stern davits off, if they so wish) As I said at the start, I have no idea how this will sell, but I certainly didn’t want to simply produce yet another run of the mill kit with just bulkheads, keel and upper deck, like the ones I did 25 years ago - no fun in that. This will be my 17th and final kit for this year. Jim will be doing a build log for this later this year - I still have much to do before then, though. PaddyO, uss frolick, Jay 1 and 32 others 33 1 1 Vanguard Models on Facebook
druxey Posted June 1 #426 Posted June 1 Nice subject, Chris. And the prototype looks very impressive! Guyuti, thibaultron, hollowneck and 5 others 8 Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Vane Posted June 1 #427 Posted June 1 Nice, it really looks like the child of Speedy and Snake 🙂 Interesting with the lower deck. Re-inventing the hobby once again! Now you have an impresive line-up of models. Any thoughts of adding a bomb or mortar vessel to your fleet? Canute, mtaylor, Guyuti and 4 others 7 Current builds: HMS Victory (Corel 1:98), HMS Snake (Caldercraft 1:64), HMBV Granado (Caldercraft 1:64), HMS Diana (Caldercraft 1:64), HMS Speedy (Vanguard Models 1:64)
chris watton Posted June 1 Author #428 Posted June 1 (edited) 18 hours ago, Vane said: Nice, it really looks like the child of Speedy and Snake 🙂 Interesting with the lower deck. Re-inventing the hobby once again! Now you have an impresive line-up of models. Any thoughts of adding a bomb or mortar vessel to your fleet? Cheers Not sure about adding a bomb or mortar vessel, never gave that type a single thought. And, to be honest, I have very little passion for that type of vessel. I don't think people will be too disappointed with kit number 18, though. Edited June 2 by chris watton Vane, JpR62, mtaylor and 13 others 15 1 Vanguard Models on Facebook
James H Posted June 1 #429 Posted June 1 1 hour ago, chris watton said: I don't think people will be too disappointed with kit number 18, though Shhhhhhhhh......... 🤫 😉 thibaultron, Canute, ccoyle and 4 others 3 4 SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! On the bench: Zip, nada! On Hold: HMS Winchelsea Double Capstan - Syren Ship Models - 1:48 Finished US Baltimore Armed Privateer Schooner Grecian 1812 (prototype) - Vanguard Models - 1:64 'Zulu' fishing boat, Vanguard Models - 1:64 Fifie' fishing boat, Vanguard Models - 1:64 HMS Flirt 1782, Vanguard Models - 1:64. Duchess of Kingston c.1780 - Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. 'Nisha' - The Brixham 'Mumble-Bee' - Vanguard Models 1:64 'Saucy Jack' fishing boat - Vanguard Models - 1:64 Ranger 'Barking Fish Carrier' - 1864 - Vanguard Models - 1:64 HMS Indefatigable - 1794 (production prototype), Vanguard Models - 1:64. HMS Harpy - 1796 (production prototype) - Vanguard Models - 1:64 Indeterminate: Tender Avos - Master Korabel - 1:72. H.M.S. Victory (production prototype) - Amati - 1:64. HMS Granado 1742 (cross section) - CAFModel - 1:48
Morgan Posted June 1 #430 Posted June 1 👂👂18th! care to drop any further hints 🫣 thibaultron, chris watton, mtaylor and 2 others 5
James H Posted June 1 #431 Posted June 1 55 minutes ago, Morgan said: 👂👂18th! care to drop any further hints 🫣 Nope! 😝 Guyuti, Oboship, mtaylor and 7 others 1 2 7 SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! On the bench: Zip, nada! On Hold: HMS Winchelsea Double Capstan - Syren Ship Models - 1:48 Finished US Baltimore Armed Privateer Schooner Grecian 1812 (prototype) - Vanguard Models - 1:64 'Zulu' fishing boat, Vanguard Models - 1:64 Fifie' fishing boat, Vanguard Models - 1:64 HMS Flirt 1782, Vanguard Models - 1:64. Duchess of Kingston c.1780 - Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. 'Nisha' - The Brixham 'Mumble-Bee' - Vanguard Models 1:64 'Saucy Jack' fishing boat - Vanguard Models - 1:64 Ranger 'Barking Fish Carrier' - 1864 - Vanguard Models - 1:64 HMS Indefatigable - 1794 (production prototype), Vanguard Models - 1:64. HMS Harpy - 1796 (production prototype) - Vanguard Models - 1:64 Indeterminate: Tender Avos - Master Korabel - 1:72. H.M.S. Victory (production prototype) - Amati - 1:64. HMS Granado 1742 (cross section) - CAFModel - 1:48
woodartist Posted June 2 #432 Posted June 2 what is the timeline for first sale? Canute, thibaultron and mtaylor 3
chris watton Posted June 2 Author #433 Posted June 2 6 hours ago, woodartist said: what is the timeline for first sale? By the end of this year hopefully Oboship, James H, Kevin and 5 others 8 Vanguard Models on Facebook
navarcus Posted June 2 #434 Posted June 2 Wouldn't the purple smokestack's (vent?) opening face forward because the wind comes from aft? Canute, mtaylor and thibaultron 3
chris watton Posted June 2 Author #435 Posted June 2 (edited) 1 hour ago, navarcus said: Wouldn't the purple smokestack's (vent?) opening face forward because the wind comes from aft? That would be up to the modeller. It can face fore, aft, port or starboard. Most contemporary models I have seen have it facing as I have positioned it - but really, it is no big deal as it can be changed to whatever postion anyway. Edited June 2 by chris watton hollowneck, thibaultron, Canute and 2 others 5 Vanguard Models on Facebook
James H Posted June 2 #436 Posted June 2 25 minutes ago, navarcus said: Wouldn't the purple smokestack's (vent?) opening face forward because the wind comes from aft? Remember, the ship is travelling forward, pushed by that aft wind. If the stack was facing forwards, there would be a positive pressure at the vent, forcing smoke under the deck. Facing backwards, despite the wind, there will be a negative pressure, helping to draw out smoke. Kevin, mtaylor, chris watton and 10 others 13 SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! On the bench: Zip, nada! On Hold: HMS Winchelsea Double Capstan - Syren Ship Models - 1:48 Finished US Baltimore Armed Privateer Schooner Grecian 1812 (prototype) - Vanguard Models - 1:64 'Zulu' fishing boat, Vanguard Models - 1:64 Fifie' fishing boat, Vanguard Models - 1:64 HMS Flirt 1782, Vanguard Models - 1:64. Duchess of Kingston c.1780 - Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. 'Nisha' - The Brixham 'Mumble-Bee' - Vanguard Models 1:64 'Saucy Jack' fishing boat - Vanguard Models - 1:64 Ranger 'Barking Fish Carrier' - 1864 - Vanguard Models - 1:64 HMS Indefatigable - 1794 (production prototype), Vanguard Models - 1:64. HMS Harpy - 1796 (production prototype) - Vanguard Models - 1:64 Indeterminate: Tender Avos - Master Korabel - 1:72. H.M.S. Victory (production prototype) - Amati - 1:64. HMS Granado 1742 (cross section) - CAFModel - 1:48
glbarlow Posted June 2 #437 Posted June 2 23 hours ago, chris watton said: don't think people will be too disappointed with kit number 18, Is it a Surprise?😁 Canute, BenD, mtaylor and 5 others 2 6 Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose
James H Posted June 2 #438 Posted June 2 24 minutes ago, glbarlow said: Is it a Surprise?😁 Most definitely…….not. Oboship, BrochBoating, mtaylor and 5 others 1 7 SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! On the bench: Zip, nada! On Hold: HMS Winchelsea Double Capstan - Syren Ship Models - 1:48 Finished US Baltimore Armed Privateer Schooner Grecian 1812 (prototype) - Vanguard Models - 1:64 'Zulu' fishing boat, Vanguard Models - 1:64 Fifie' fishing boat, Vanguard Models - 1:64 HMS Flirt 1782, Vanguard Models - 1:64. Duchess of Kingston c.1780 - Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. 'Nisha' - The Brixham 'Mumble-Bee' - Vanguard Models 1:64 'Saucy Jack' fishing boat - Vanguard Models - 1:64 Ranger 'Barking Fish Carrier' - 1864 - Vanguard Models - 1:64 HMS Indefatigable - 1794 (production prototype), Vanguard Models - 1:64. HMS Harpy - 1796 (production prototype) - Vanguard Models - 1:64 Indeterminate: Tender Avos - Master Korabel - 1:72. H.M.S. Victory (production prototype) - Amati - 1:64. HMS Granado 1742 (cross section) - CAFModel - 1:48
wvdhee Posted June 3 #439 Posted June 3 It's maybe already asked somewhere else, but why do carronades on the Harpy count as guns (18 gun brig) and on the indy, sphinx and other ships they're not taken into the gun count? thibaultron, Canute and mtaylor 3 Walter. Current build: Thinking about it Finished build: HMS Flirt
chris watton Posted June 3 Author #440 Posted June 3 (edited) They counted as guns on brigs. At this period (1790's-1815), the overwhelming majority of 18-gun brigs had the 16x24 or 32-Pounders and 2 x 6-Pounder long guns. This made them very powerful for their size at closer ranges. If they were armed with 18 x 6-Pounder long guns, not only would they have been slower due to the heavier weight of the guns, their broadside weight and effect would have been pitiful when compared to the carronades They were never counted as such on larger vessels, though, presumably because the armament was chopped and changed quite often (secondary armament, that is, not the main gun deck ordnance – unless it was a 24-pounder frigate fitted with 18’s…) Edited June 3 by chris watton wvdhee, Ronald-V, Kevin and 11 others 12 2 Vanguard Models on Facebook
Morgan Posted June 3 #441 Posted June 3 (edited) To add to Chris’s point, ships carrying less than 20 guns were ‘un-rated’ and not impacted by the guns -v- carronades -v- total ordnance argument that muddied the rated ship system delineations prior to a total ordnance rating system adopted in 1817. Gary Edited June 3 by Morgan ccoyle, Thukydides, Canute and 8 others 10 1
hamilton Posted June 3 #442 Posted June 3 Technically, it will be a "surprise", just not the one people might think... hamilton mtaylor, chris watton, thibaultron and 1 other 1 3 current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch) previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); MS Glad Tidings (1937) (in need of a refit); HMS Blandford (1719) from Corel HMS Greyhound; Fair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851); Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch) under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy
James H Posted June 3 #443 Posted June 3 It'll come as no surprise that it won't be Surprise. Kevin, BobG, ccoyle and 9 others 4 8 SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! On the bench: Zip, nada! On Hold: HMS Winchelsea Double Capstan - Syren Ship Models - 1:48 Finished US Baltimore Armed Privateer Schooner Grecian 1812 (prototype) - Vanguard Models - 1:64 'Zulu' fishing boat, Vanguard Models - 1:64 Fifie' fishing boat, Vanguard Models - 1:64 HMS Flirt 1782, Vanguard Models - 1:64. Duchess of Kingston c.1780 - Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. 'Nisha' - The Brixham 'Mumble-Bee' - Vanguard Models 1:64 'Saucy Jack' fishing boat - Vanguard Models - 1:64 Ranger 'Barking Fish Carrier' - 1864 - Vanguard Models - 1:64 HMS Indefatigable - 1794 (production prototype), Vanguard Models - 1:64. HMS Harpy - 1796 (production prototype) - Vanguard Models - 1:64 Indeterminate: Tender Avos - Master Korabel - 1:72. H.M.S. Victory (production prototype) - Amati - 1:64. HMS Granado 1742 (cross section) - CAFModel - 1:48
HardeeHarHar Posted June 4 #444 Posted June 4 On 6/1/2024 at 7:36 AM, chris watton said: Not sure about adding a bomb or mortar vessel, never gave that type a single thought. And, to be honest, I have very little passion for that type of vessel. Wich' being one who's building a Granado - I'd encourage add'n a bomb vessel to the Vanguard Fleet 😃. When it comes to armament, maybe bigger is better 😉 chris watton, Canute, thibaultron and 2 others 5 Brian Current Builds: HMBV Granado 1/64 Caldercraft; HMS Sphinx 1775 by HardeeHarHar - Vanguard Models 1:64-V2 Completed Build: HMS Bounty's Jolly Boat 1/25 Artesania Latina; Master Korabel - 1:36 Yefin Nikonov's Secret Vessel On the Shelf: HMBV Granado 1/48 CAF Model
chris watton Posted June 4 Author #445 Posted June 4 (edited) Just received some first renders of one of the series of boats I have commissioned to be done for me. This is the progress of the 24 foot cutter, and I am quite happy with that. Am looking forward to seeing the rest when they're done. Oh, and no bomb vessels planned! lol Edited June 4 by chris watton JeffT, mtaylor, BenD and 27 others 29 1 Vanguard Models on Facebook
chris watton Posted June 5 Author #447 Posted June 5 (edited) 9 hours ago, uss frolick said: Cochrane's Imperious? He was a bit, wasn't he! Edited June 5 by chris watton Blue Ensign, brunnels, Canute and 7 others 2 8 Vanguard Models on Facebook
chris watton Posted June 9 Author #448 Posted June 9 Thukydides, GrandpaPhil, gjdale and 27 others 19 11 Vanguard Models on Facebook
Kevin Posted June 9 #449 Posted June 9 would make a nice diorama setting on its own Canute, mtaylor, Craigie65 and 4 others 7 Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - On hold MHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024 Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat
Blue Ensign Posted June 9 #450 Posted June 9 What I've been waiting for, thank you Chris. Presumably there is more work to do on the figures before they go into production? B.E. thibaultron, mtaylor, Canute and 3 others 6 Current Build: Medway-longboat-1742-by-blue-ensign-½”-scale Completed builds: HMS Indefatigable-1794-by-blue-ensign-vanguard-models-1:64-scale HMS Sphinx 1775 by Blue Ensign. 1:64 scale - Vanguard Models Queen-Anne-Royal-Barge-circa-1700-by-Blue-Ensign Fifie fishing boat Lady Eleanor Muirneag-1903-–-a-scottish-zulu-fishing-boat-164-scale-based-on-the-vanguard-models-zulu-kit/ HM Cutter Alert 1777 HM Cutter Cheerful 1806 18th-century-English-longboat-by-Blue-Ensign-ms-148-scale/ 18thc English Pinnace by Blue Ensign-Model-Shipways-1:24 scale/ HMS-Pegasus-by-Blue-Ensign-finished-Victory-Models-1:64-scale/ Heller Seventy-four 1:150 scale - modified Le Superbe/Le Glorieux kit after Boudriot, waterline setting with sails. The schooner Pickle, Jotika pob kit 1:64 scale, my interpretation.
Recommended Posts