michael mott Posted June 15, 2023 Author #2161 Posted June 15, 2023 Thank you to everyone for the positive comments and welcome back. Michael bruce d, Tony Hunt, realworkingsailor and 6 others 9 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
allanyed Posted June 15, 2023 #2162 Posted June 15, 2023 (edited) Sort of like a long lost friend that returns home after being gone for too long and everyone, including me, is very happy you are back. Allan Edited June 15, 2023 by allanyed JohnLea, FriedClams, druxey and 4 others 7 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU
mtaylor Posted June 15, 2023 #2163 Posted June 15, 2023 It's great to see you back and that you've recovered, Michael. Keith Black, michael mott, druxey and 3 others 6 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Roger Pellett Posted June 16, 2023 #2164 Posted June 16, 2023 Railroads or boats! Both are interesting which is enhanced by your lovely workmanship. Wether in our shop actively building or just “lurking” here it’s great to know that you are well. Welcome Back! Roger mtaylor, FriedClams, Keith Black and 1 other 4 Quote
JohnLea Posted June 16, 2023 #2165 Posted June 16, 2023 5 hours ago, michael mott said: Hello everyone I’m just getting my mojo back in the ship modeling world. I had a heart attack in November 2022 and am now recovered from that. I had a wonderful conversation with David Anscherl earlier this week and he challenged me to do something on the cutter within the next 2 weeks. Great news. Keep pumping! michael mott, Keith Black, mtaylor and 2 others 5 Quote The closer you get to Canada, the more things will eat your horses. ~ T. King
Reggiemon Posted June 16, 2023 #2166 Posted June 16, 2023 Very glad to see you back! michael mott, FriedClams, Jack12477 and 2 others 5 Quote Building: 1/10 scale 1922 Alden Malabar ll R/C Finished: Rappahannock Boat Works Torpedo stern, steam launch. R/C 1/6 scale steam launch, Corel Flying Fish 1860
MAGIC's Craig Posted June 16, 2023 #2167 Posted June 16, 2023 Please allow me to add my welcome and my delight that you are "back". Like others, I look forward again to seeing your posts and the marvelous work you demonstrate. Your work has served as a steadying sail whenever my model-building efforts bashed into choppy seas. Ryland Craze, Jack12477, JohnLea and 4 others 7 Quote
Bedford Posted June 16, 2023 #2168 Posted June 16, 2023 Sorry to hear of the heart attack but very happy you've recovered and are back on deck. You've been missed as have you amazing skills! druxey, michael mott, Keith Black and 3 others 6 Quote Ships built :- Schooner for Port Jackson Thermoplylae Bluenose II Full size Tammie Norrie dinghy 1:8 scale Miss Caroline, model of the full size boat I built Under construction :- Royal Caroline, this one is special as it is in memory of my 13 year old daughter, Caroline who passed away in 2005 Miane three masted schooner R/C, scratch build (on hold) Charles W Morgan (on hold) Scratch designed and built R/C Mahogany and Walnut speedboat (on hold) In the que :- S.T. Waratah, maybe!
druxey Posted June 17, 2023 #2169 Posted June 17, 2023 Aaaand... you leaped on that challenge really promptly! Glad to see the cutter once again making headway. Well done, Michael. Ryland Craze, Keith Black, Jack12477 and 5 others 7 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
michael mott Posted June 17, 2023 Author #2170 Posted June 17, 2023 Just need to solder the top lip on and drill the hole for the drain the the sink should be ready, presently the countertop is at 28 1/2 inches I am wondering if it is a bit too low. Michael druxey, MAGIC's Craig, WalrusGuy and 14 others 17 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Keith Black Posted June 17, 2023 #2171 Posted June 17, 2023 44 minutes ago, michael mott said: presently the countertop is at 28 1/2 inches I am wondering if it is a bit too low. Not if you've got the kids doing cleanup duties. ......Recommended sink height in a ship's galley is 34 inches, I don't think anyone is going to notice 5.5 inches at scale. michael mott, FriedClams, Jack12477 and 1 other 4 Quote Current Builds: 1870's Sternwheeler, Lula Wood Hull Screw Frigate USS Tennessee Decorative Carrack Warship Restoration, the Amelia Completed: 1880s Floating Steam Donkey Pile Driver Early Swift 1805 Model Restoration
druxey Posted June 17, 2023 #2172 Posted June 17, 2023 Sink looks great! Jack12477, Keith Black, mtaylor and 2 others 4 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
michael mott Posted June 20, 2023 Author #2173 Posted June 20, 2023 The lip is now cut and rounded on the edges I will be raising the top when I get it back in the boat. Michael WalrusGuy, Keith Black, Reggiemon and 15 others 18 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Bedford Posted June 20, 2023 #2174 Posted June 20, 2023 Exquisite Mirabell61, FriedClams, Jack12477 and 2 others 5 Quote Ships built :- Schooner for Port Jackson Thermoplylae Bluenose II Full size Tammie Norrie dinghy 1:8 scale Miss Caroline, model of the full size boat I built Under construction :- Royal Caroline, this one is special as it is in memory of my 13 year old daughter, Caroline who passed away in 2005 Miane three masted schooner R/C, scratch build (on hold) Charles W Morgan (on hold) Scratch designed and built R/C Mahogany and Walnut speedboat (on hold) In the que :- S.T. Waratah, maybe!
Bob Cleek Posted June 20, 2023 #2175 Posted June 20, 2023 On 6/17/2023 at 7:11 AM, michael mott said: Just need to solder the top lip on and drill the hole for the drain the the sink should be ready, presently the countertop is at 28 1/2 inches I am wondering if it is a bit too low. On 6/17/2023 at 8:08 AM, Keith Black said: Not if you've got the kids doing cleanup duties. ......Recommended sink height in a ship's galley is 34 inches, I don't think anyone is going to notice 5.5 inches at scale. I wouldn't bet on it not being noticeable, particularly when the rest of the furniture is installed. 34 inches is the rule of thumb because when a boat heels under sail, the sink has to be at least that height to be useable when the sink is on the leeward side. Many galleys have "butt belts" the user can employ to strap themselves in or even bars that drop in behind the user that can be used as a seat or to brace against in a seaway. A sink that much lower would be noticed by an experienced seaman. It might not be that big of a deal in an RV that sits level, but not in a boat that may be sailing on her ear half the time. Additionally, it looks like the sink is going to be below the waterline even at 34 inches and so it needs all the height it can get to make space for the sink drain elbow, hand pump, and the attendant plumbing with an anti-siphon loop and check valve. I wouldn't have bothered to comment on something I realize many would think was picky, but this model has been so perfectly done, I, for one at least, would hate to see a compromise like this one, even if you had to look inside to see it. That said, I trust Michael's impeccable judgment in the matter. michael mott, FriedClams, Tony Hunt and 3 others 5 1 Quote
Thukydides Posted June 20, 2023 #2176 Posted June 20, 2023 Amazing metal work! FriedClams, druxey, Keith Black and 1 other 3 1 Quote Current Builds: HMS Perseus (Scratch) Completed Builds: Type VII C U Boat (HobbyBoss); HM Cutter Alert (Vanguard Models)
rwiederrich Posted June 20, 2023 #2177 Posted June 20, 2023 (edited) Mike...it is so nice to have you back on these pages...and as usual, your work is impeccable, and without question, as accurate as can be achievable. Watchin with enthusiasm. Rob Edited June 20, 2023 by rwiederrich Keith Black, FriedClams, mtaylor and 4 others 6 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts."
michael mott Posted June 21, 2023 Author #2178 Posted June 21, 2023 Fiddling with the galley cabinets today. michael TomShipModel, WalrusGuy, Charter33 and 18 others 21 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
FriedClams Posted June 27, 2023 #2179 Posted June 27, 2023 Sad to hear of your heart attack and so glad to hear of your recovery, Michael. It's great to see (and marvel) at your wonderful work once again. You have been missed. Welcome back. Gary Reggiemon, Keith Black, mtaylor and 2 others 5 Quote Current Build Pelican Eastern-Rig Dragger Completed Scratch Builds Rangeley Guide Boat New England Stonington Dragger 1940 Auto Repair Shop Mack FK Shadowbox
TomShipModel Posted June 28, 2023 #2180 Posted June 28, 2023 The photograph of the galley on a model looks like a photo in a sales brochure. Fantastic clean work Michael. Tom Ryland Craze, wefalck, Keith Black and 3 others 6 Quote Tom Ruggiero Director Nautical Research Guild Member Ship Model Society of New Jersey (Past President)
BANYAN Posted June 29, 2023 #2181 Posted June 29, 2023 Great to see you back Michael, had been missing your wonderful, high quality work. cheers Pat Keith Black, FriedClams and mtaylor 3 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
TomShipModel Posted June 30, 2023 #2182 Posted June 30, 2023 I meant, a sales brochure for a full size boat. AN interesting fact with photography is that no matter how good your model looks at a comfortable viewing distance, the photograph shows all of the imperfections. The galley on your model looks like it was taken on actual boat. Fantastic! JpR62, Keith Black, FriedClams and 2 others 5 Quote Tom Ruggiero Director Nautical Research Guild Member Ship Model Society of New Jersey (Past President)
michael mott Posted June 30, 2023 Author #2183 Posted June 30, 2023 Thanks Tom I appreciate that. Thanks to everyone for your kind comments. I did some more work on the galley and have soldered the top to the sink and used the sheet metal drill for the drain pipe. I have given the wood a good coat of tung oil and will give it another coat later. Michael Jack12477, mtaylor, PeteB and 16 others 16 3 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Jim Lad Posted June 30, 2023 #2184 Posted June 30, 2023 I've been away for a bit, so I missed out on your news, Michael. Glad to see you back working on your wonderful model, but even happier to hear that you've recovered from your problems. John Jack12477, FriedClams, mtaylor and 3 others 5 1 Quote
druxey Posted June 30, 2023 #2185 Posted June 30, 2023 Lovely, Michael! Now, a scale plug.... realworkingsailor, Keith Black, michael mott and 3 others 6 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
TBlack Posted June 30, 2023 #2186 Posted June 30, 2023 On 6/28/2023 at 9:18 AM, TomShipModel said: The photograph of the galley on a model looks like a photo in a sales brochure. Fantastic clean work Michael. Tom Hard to believe it's a model! Tom Jack12477, michael mott, FriedClams and 2 others 4 1 Quote
realworkingsailor Posted June 30, 2023 #2187 Posted June 30, 2023 1 hour ago, druxey said: Lovely, Michael! Now, a scale plug.... At this scale, probably the only thing that needs to be done is to pop the head off of a champagne cork and you’re good to go. 😉 Andy Jack12477, Keith Black, michael mott and 2 others 5 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy
michael mott Posted July 4, 2023 Author #2188 Posted July 4, 2023 (edited) Starting the back of the galley now. It is easier to work on it outside of the hull, l am amazed at how nice the maple that I cut from the big log 50 years ago still works and planes up with such a lovely lustre. I’m guessing it is because it has been air dried. Michael Edited July 4, 2023 by michael mott Bedford, gjdale, billocrates and 18 others 16 5 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it.
Chuck Posted July 4, 2023 #2189 Posted July 4, 2023 That is looking very good Michael...so nice to see this model progressing. 😀 Keith Black, FriedClams, Jack12477 and 3 others 5 1 Quote Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY
BANYAN Posted July 5, 2023 #2190 Posted July 5, 2023 ... and ready to be shipped to the dockyard by rail Seriously, that's some nicely executed work Michael, it looks so good. cheers Pat Keith Black, Jack12477, FriedClams and 2 others 5 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.