Mirabell61 Posted June 29, 2018 #271 Posted June 29, 2018 nice resting place for the captain Karl, beautiful detail ! Nils mtaylor and Jeronimo 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
bdgiantman2 Posted June 30, 2018 #272 Posted June 30, 2018 If I remember the deck layout correctly, I think there is a galley just forward of the officer's bench on the Chebece. This model is looking great as all of your projects are. You are a master builder. Brian mtaylor and Jeronimo 2 Quote
Jeronimo Posted July 1, 2018 Author #273 Posted July 1, 2018 Cannons ready assembled. Karl Part 32 Ryland Craze, Siegfried, costeo and 29 others 32 Quote
albert Posted July 1, 2018 #274 Posted July 1, 2018 Very very nice work. Jeronimo and mtaylor 2 Quote
BANYAN Posted July 2, 2018 #275 Posted July 2, 2018 Beautiful work - a pleasure to view this build. cheers Pat mtaylor and Jeronimo 2 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
Jeronimo Posted July 2, 2018 Author #276 Posted July 2, 2018 Thanks for the kind comments. Cut in the deck for a view into Officer's cabin. Karl Bluto 1790, mtaylor, GrandpaPhil and 26 others 28 1 Quote
dvm27 Posted July 2, 2018 #277 Posted July 2, 2018 Quite a difference, Karl. It takes a lot of confidence to do the cut out at this point in the construction process. Well done! Jeronimo, mtaylor and druxey 3 Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752
ChadB Posted July 2, 2018 #278 Posted July 2, 2018 Amazing Karl!!! mtaylor and Jeronimo 2 Quote Completed Models: Triton Cross Section In Progress: Brig Eagle
Siggi52 Posted July 2, 2018 #279 Posted July 2, 2018 Super, Karl Jeronimo and mtaylor 2 Quote Regards, Siggi Recent build: HMS Tiger (1747) Captains Barge ca. 1760, scratch build HMS Dragon 74 gunner 1760, scratch build
VACorsair Posted July 6, 2018 #280 Posted July 6, 2018 Is it possible that there is more detail here than in the full scale version!?!! 11 out of 10! Bluto 1790, Tigersteve, mtaylor and 3 others 6 Quote
Jeronimo Posted July 12, 2018 Author #281 Posted July 12, 2018 Thanks to all for the kind comments. Board stove installed. Part 34 albert, popash42, CDW and 32 others 34 1 Quote
ChadB Posted July 12, 2018 #282 Posted July 12, 2018 Karl- Beautiful work as usual! What type of finish do you use on your pearwood? I believe I remember reading in one of your logs at some point but I could be mistaken. Thanks, Chad Siegfried, mtaylor, EdT and 1 other 4 Quote Completed Models: Triton Cross Section In Progress: Brig Eagle
Jeronimo Posted July 12, 2018 Author #283 Posted July 12, 2018 1 hour ago, ChadB said: Karl- Beautiful work as usual! What type of finish do you use on your pearwood? I believe I remember reading in one of your logs at some point but I could be mistaken. Thanks, Chad Chad, view Page 9. Karl mtaylor and Siegfried 2 Quote
jose_b Posted July 12, 2018 #284 Posted July 12, 2018 Excellent and neatly work! Siegfried and mtaylor 2 Quote Building Le François: http://modelshipworld.com/index.php/topic/9952-le-fran%C3%A7ois-by-jose-scale-1-48-1683/
BANYAN Posted July 13, 2018 #285 Posted July 13, 2018 I very much enjoy following your build log Karl; exceptional workmanship and a joy to behold. cheers Pat Siegfried, Jeronimo and mtaylor 3 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
ChadB Posted July 13, 2018 #286 Posted July 13, 2018 19 hours ago, Jeronimo said: Chad, view Page 9. Karl Oh geez... it was right under my nose! Thanks Karl! Jeronimo and mtaylor 2 Quote Completed Models: Triton Cross Section In Progress: Brig Eagle
Jeronimo Posted July 24, 2018 Author #287 Posted July 24, 2018 Manufacture and assembly of the barrels. Karl Part 35 Ainars Apalais, Tigersteve, BANYAN and 28 others 30 1 Quote
rtwpsom2 Posted July 24, 2018 #288 Posted July 24, 2018 Jeronimo, I just want you to know that I will be stealing your method for making barrels and I apologize in advance for any inconvenience this may cause you. Jeronimo and mtaylor 2 Quote
Siggi52 Posted July 24, 2018 #289 Posted July 24, 2018 Good morning Karl, it a great model, bravo Jeronimo and mtaylor 2 Quote Regards, Siggi Recent build: HMS Tiger (1747) Captains Barge ca. 1760, scratch build HMS Dragon 74 gunner 1760, scratch build
Landrotten Highlander Posted July 24, 2018 #290 Posted July 24, 2018 Very nicely presented. How did you make the edges of the base plate? Slainte gu mhath L.H. Jeronimo, mtaylor and Mirabell61 3 Quote Heghlu'meH QaQ jajvam Slainte gu mhath L.H.
Mau Posted July 24, 2018 #291 Posted July 24, 2018 Congratulations Karl!! Another superb model!!! mtaylor and Jeronimo 2 Quote
Mirabell61 Posted July 24, 2018 #292 Posted July 24, 2018 super work Karl ! Nils Jeronimo and mtaylor 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
ChrisLBren Posted July 24, 2018 #293 Posted July 24, 2018 Terrific work Karl !!! mtaylor and Jeronimo 2 Quote
Jeronimo Posted July 24, 2018 Author #294 Posted July 24, 2018 6 hours ago, Landrotten Highlander said: Very nicely presented. How did you make the edges of the base plate? Slainte gu mhath L.H. Hello L.H. Trims are finished products, bought, not homemade. Karl mtaylor and Landrotten Highlander 2 Quote
Jeronimo Posted July 24, 2018 Author #295 Posted July 24, 2018 (edited) Hello friends, thanks to all who accompanied me during the construction of the CHEBECE with their friendly comments and likes. Karl PART 36 Edited July 24, 2018 by Jeronimo Bluto 1790, ulrich, BANYAN and 22 others 25 Quote
Jeronimo Posted July 24, 2018 Author #296 Posted July 24, 2018 (edited) Hello friends. Look in my little model ship museum. Karl PART 37 Edited July 24, 2018 by Jeronimo Tigersteve, Landrotten Highlander, Dubz and 31 others 34 Quote
jose_b Posted July 24, 2018 #297 Posted July 24, 2018 It's really an awesome museum! popash42, Jeronimo and Tigersteve 3 Quote Building Le François: http://modelshipworld.com/index.php/topic/9952-le-fran%C3%A7ois-by-jose-scale-1-48-1683/
mtaylor Posted July 24, 2018 #299 Posted July 24, 2018 Beautifully done and the display is perfect. I love it!!!!! Jeronimo and CDW 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
fnick Posted July 24, 2018 #300 Posted July 24, 2018 Ok I suppose... Oh and WOW! Nick Jeronimo and mtaylor 2 Quote Le Mirage by fnick - Corel - 1:75
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.