Forlani daniel Posted July 6, 2018 #1 Posted July 6, 2018 Ciao a tutti, Ho realizzato lo scaletto e sinceramente è stato abbastanza difficile essenzialmente per due motivi. Il primo motivo: l'utilizzo della linea del ponte per realizzare la dima di pontuale per i riferimenti delle coste e la seconda dima per il cassero sovrapposta alla precedente. Il secondo motivo: il disegno in pianta del ponte, questa misura non tiene conto del cavallino del ponte, quindi se avessi utilizzato questo disegno senza le dovute modifiche delle quote in lunghezza avrei ottenuto sulla dima di pontuale con una sagoma più corta di circa 5mm. Alcune foto dello scaletto. Se notate da una parte ho messo il disegno con la chiglia a pari e nell'altra foto si vede quanto il disegno è stato allungato. Hi everyone, I realized the ladder and honestly it was quite difficult essentially for two reasons. The first reason: the use of the bridge line to create the pontic template for the rib references and the second template for the formwork overlapping the previous one. The second reason: the plan drawing of the bridge, this measure does not take into account the pony of the bridge, so if I had used this design without the due changes in the dimensions in length I would have obtained on the pontual template with a shorter shape of about 5mm. Some photos of the ladder. If you notice on one side I put the design with the keel on the same level and in the other photo you can see how long the design has been stretched Dima di pontuale finita Scaletto Qui ho posizionato la dima del cassero Un Salutone a presto BANYAN, Mirabell61, tlevine and 15 others 18 Quote
Forlani daniel Posted July 8, 2018 Author #2 Posted July 8, 2018 Ciao a tutti, comincio a mettere alcune foto della carpenteria assiale. Dritto di poppa con la continuazione della chiglia in un pezzo unico, ho ricavato questo particolare vicino ad un nodo per rispettare il più possibile in senso della venatura. Hi everyone, I begin to put some photos of the axial carpentry. Straight aft with the continuation of the keel in a single piece, I obtained this detail near a knot to respect as much as possible in the direction of grain. Thanks Dirk Un Salutone mtaylor, yvesvidal, Rik Thistle and 14 others 17 Quote
AntonyUK Posted July 8, 2018 #3 Posted July 8, 2018 Hello Dirk. A nice start to a great build. Looks like you have put a lot of thought into how you are going to build this model. I've not seen anyone use a fly cutter for large curves for some years. Nice Machining of the timbers. Regards Antony. Ciao Dirk. Un buon inizio per una grande build. Sembra che tu abbia riflettuto molto su come costruire questo modello. Non ho visto nessuno usare un cutter per grandi curve per alcuni anni. Bella lavorazione delle travi. Saluti Antonio. alangr4, mtaylor and moreplovac 3 Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section
Forlani daniel Posted July 13, 2018 Author #4 Posted July 13, 2018 Ciao a tutti, Alcune foto della ruota e freccia. Hi everyone, Some photos of the wheel and arrow Un Salutone Jeronimo, paulsutcliffe, Mike Y and 17 others 20 Quote
Forlani daniel Posted July 17, 2018 Author #5 Posted July 17, 2018 Ciao e grazie a tutti, altre foto, la chiodatura lo eseguita utilizzando uno spicchio di legno di noce. Hello and thanks to everyone, more photos, nailing performed using a slice of walnut wood. Un Saluto kees de mol, Hubac's Historian, Landlubber Mike and 25 others 27 1 Quote
dvm27 Posted July 17, 2018 #6 Posted July 17, 2018 Wonderful joinery. Looks like a terrific model in the making! druxey and mtaylor 2 Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752
Tigersteve Posted July 17, 2018 #7 Posted July 17, 2018 Beautiful! Steve mtaylor 1 Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
Forlani daniel Posted July 18, 2018 Author #8 Posted July 18, 2018 Ciao e grazie a tutti, in queste foto ho realizzato le sedi delle coste sulla contro ruota. Hello and thanks to everyone, in these photos I realized the seats of the ribs on the counter wheel. Un Saluto Landlubber Mike, albert, John Allen and 21 others 24 Quote
albert Posted July 18, 2018 #9 Posted July 18, 2018 Great beautiful work Daniel, very very nice. mtaylor 1 Quote
Forlani daniel Posted July 20, 2018 Author #10 Posted July 20, 2018 Ciao e grazie a tutti, il particolare che segue è il controdritto. Hello and thanks to everyone, the detail that follows is the counterdrite. Un Saluto oneslim, druxey, John Cheevers and 19 others 22 Quote
Forlani daniel Posted July 21, 2018 Author #11 Posted July 21, 2018 Ciao e grazie a tutti, In queste foto ho iniziato la realizzazione della battura. Hello and thanks to everyone, In these photos I started the realization of the hammering. Un Saluto AntonyUK, mtaylor, yvesvidal and 15 others 18 Quote
Forlani daniel Posted July 30, 2018 Author #12 Posted July 30, 2018 Ciao e grazie a tutti, la battura sul dritto e sulla ruota di prua è stata molto impegnativa. Hello and thanks to everyone, the beating on the right and on the bow wheel has been very challenging. Un Saluto Jeronimo, Mike Y, Bob Legge and 15 others 18 Quote
Landrotten Highlander Posted July 30, 2018 #13 Posted July 30, 2018 Hi, do you have a manual milling machine or a computer driven one? Whatever you use, perfect work mtaylor and Forlani daniel 2 Quote Heghlu'meH QaQ jajvam Slainte gu mhath L.H.
albert Posted July 30, 2018 #14 Posted July 30, 2018 Nice, precise and clean work, very good Daniel. Forlani daniel, mtaylor and druxey 3 Quote
archjofo Posted July 31, 2018 #15 Posted July 31, 2018 Fantastic work! Jeronimo, mtaylor and Forlani daniel 3 Quote Best regards Johann Video: La Créole - Scale 1/48, French corvette of 1827 - naval artillery La Créole - Scale 1/48, French corvette - Construction of long boat La Créole - Scale 1/48, French corvette - Construction of the masts La Créole - Scale 1/48, French corvette - 2019 La Créole - Scale 1/48, French corvette - standing rigging - part 1 La Créole - Scale 1/48, French corvette - standing rigging - part 2 La Créole - Scale 1/48, French corvette - standing rigging - part 3 See also our german forum for Sailing Ship Modeling and History: www.segelschiffsmodellbau.com
Forlani daniel Posted July 31, 2018 Author #16 Posted July 31, 2018 Hello and thanks to everyone, Landrotten, I use only a manual milling machine, what you see in the photo is the FF 230 of Proxxon. Altre foto: Ho simulato il torello per vedere come si posizionava sulla chiglia More photos: I simulated the bull to see how it stood on the keel Un Saluto kees de mol, Jeronimo, John Cheevers and 13 others 16 Quote
Landrotten Highlander Posted July 31, 2018 #17 Posted July 31, 2018 Hi Daniel, thanks for your answer. Could you briefly explain how you use it to mill on a curved surface? Do you draw a line, then follow it while milling? If so, with what do you draw the line, pencil of pen? Slainte gu mhath L.H. mtaylor 1 Quote Heghlu'meH QaQ jajvam Slainte gu mhath L.H.
kees de mol Posted July 31, 2018 #18 Posted July 31, 2018 Very Impressive work! I love to see how you work with the wood and tools and I thank you for the very instructive pictures. Kind regards, Kees ps. Dirk, any Dutch roots? Your name is very common in Holland mtaylor 1 Quote Current build: Dutch beamtrawler KW88, Pelikaan 1/75 Completed build: Dutch sidetrawler KW49, Antje 1/75 Completed build: Scottisch 10m trawler 1/25 Want to see some real Kitsch... With a capital K?!! Visit my 'museum' here at MSW My blog:
Forlani daniel Posted July 31, 2018 Author #20 Posted July 31, 2018 Ciao e grazie a tutti, anche per gli auguri. Hello and thank you all, also for your good wishes. Yes, draw a line, then follow it during milling by moving the X-axis and W-axis together, trying to follow the curved line. Un Saluto Mike Y, John Allen, Bluto 1790 and 10 others 13 Quote
Forlani daniel Posted August 1, 2018 Author #21 Posted August 1, 2018 Ciao a tutti, ultime foto della carpenteria assiale, adesso passerò alla costruzione delle coste di spessore 2,8mm. Hello to all, last photo of the axial carpentry, now I will pass to the construction of the coasts of thickness 2,8mm. Siccome i disegni della monografia forniscono solo metà della costa ho dovuto con un programma vettoriale ricavare l'altra metà. Since the drawings of the monograph provide only half of the coast I had to with a vector program get the other half. Un Saluto paulsutcliffe, oneslim, Mirabell61 and 13 others 16 Quote
Forlani daniel Posted August 2, 2018 Author #22 Posted August 2, 2018 Ciao a tutti, questo è il sistema che ho adottato per incollare i vari pezzi della costa. Hi everyone, this is the system I followed to glue the various pieces of coastline. Un Saluto Mirabell61, druxey, AntonyUK and 18 others 21 Quote
Forlani daniel Posted August 7, 2018 Author #23 Posted August 7, 2018 Ciao a tutti, continua il lavoro per realizzare le numerose coste.... Hello everyone, continue the work to realize the many coasts…. Un Saluto mtaylor, popash42, michael mott and 25 others 28 Quote
Mirabell61 Posted August 7, 2018 #24 Posted August 7, 2018 Hi Daniel, super progress and very neat work, wish you further all the best with this build..... Nils BETAQDAVE and mtaylor 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
druxey Posted August 7, 2018 #25 Posted August 7, 2018 Beautiful work, Daniel! Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
BANYAN Posted August 8, 2018 #26 Posted August 8, 2018 Great work Daniel, very symmetrical layout on the framing. cheers Pat Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)
Forlani daniel Posted August 8, 2018 Author #27 Posted August 8, 2018 Ciao e grazie a tutti. Altre foto. Hello and thanks to everyone. More photos. Un Saluto John Cheevers, MikeB4, Ryland Craze and 23 others 26 Quote
Jeronimo Posted August 8, 2018 #28 Posted August 8, 2018 Hello Daniel, this look very good, more si in that sense. Karl mtaylor 1 Quote
archjofo Posted August 8, 2018 #29 Posted August 8, 2018 Hi Daniel, that looks extremely good. Super performance. mtaylor 1 Quote Best regards Johann Video: La Créole - Scale 1/48, French corvette of 1827 - naval artillery La Créole - Scale 1/48, French corvette - Construction of long boat La Créole - Scale 1/48, French corvette - Construction of the masts La Créole - Scale 1/48, French corvette - 2019 La Créole - Scale 1/48, French corvette - standing rigging - part 1 La Créole - Scale 1/48, French corvette - standing rigging - part 2 La Créole - Scale 1/48, French corvette - standing rigging - part 3 See also our german forum for Sailing Ship Modeling and History: www.segelschiffsmodellbau.com
mtaylor Posted August 9, 2018 #30 Posted August 9, 2018 Beautiful framing, Daniel. Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.