giampieroricci Posted June 15, 2020 Author #31 Posted June 15, 2020 small advances: PoulD, gieb8688, Moab and 24 others 27 Quote
G.L. Posted June 16, 2020 #32 Posted June 16, 2020 9 hours ago, giampieroricci said: small advances: Yes, Giampiero literally small, but it is a great model. Congratulazioni! mtaylor, giampieroricci, Barbossa and 2 others 5 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
noel_colledge Posted June 16, 2020 #33 Posted June 16, 2020 The accuracy of your mitres and joinery at this scale is incredible. It can be so unforgiving. Great work. druxey and mtaylor 2 Quote Finished builds are 1/35 Endeavour's Longboat by Artesania Latina 1/36 scratch built Philadelphia Gunboat from the Smithsonian Plans Current build is Scratch build Boudroit's Monograph for La Jacinthe at 1/36
giampieroricci Posted June 16, 2020 Author #34 Posted June 16, 2020 today's job: G.L., archjofo, mtaylor and 21 others 24 Quote
giampieroricci Posted June 18, 2020 Author #35 Posted June 18, 2020 a few steps forward: archjofo, JOUFF, oneslim and 30 others 33 Quote
druxey Posted June 18, 2020 #36 Posted June 18, 2020 Until I see the 1 Euro piece, I forget how small the model is. Very impressive! KentM 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
G.L. Posted June 19, 2020 #37 Posted June 19, 2020 10 hours ago, druxey said: Until I see the 1 Euro piece, I forget how small the model is. Very impressive! And it is not even not an 1 Euro piece; it is an 1 Eurocent piece. Amazing! mtaylor and giampieroricci 2 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
tkay11 Posted June 19, 2020 #38 Posted June 19, 2020 It must be very satisfying to achieve this after you set yourself this task. Seeing it makes me feel what I imagine to be your pleasure in this work. Thanks for sharing. It would be nice if you could add details about your work methods, techniques and how you overcome problems you have come across. Tony mtaylor 1 Quote === First build: Caldercraft HM Cutter Sherbourne 1763 FINISHED 2nd build: Triton cross-section COMPLETED 3rd build: La Chaloupe Armée / 42ft Armed Longboat of 1834 by tkay11 – scale 1:36, plans by M. Delacroix COMPLETED 4th build: Allège d’Arles 1833 (Ancre) POB by tkay11 – scale 1:100, plans by F. Fissore COMPLETED Working on La Jacinthe 1:96 POB (ANCRE publications)
giampieroricci Posted June 19, 2020 Author #39 Posted June 19, 2020 9 hours ago, tkay11 said: It must be very satisfying to achieve this after you set yourself this task. Seeing it makes me feel what I imagine to be your pleasure in this work. Thanks for sharing. It would be nice if you could add details about your work methods, techniques and how you overcome problems you have come across. Tony Working on this scale is really difficult; It is necessary to be very precise because a small error of a few tenths of a millimeter is enough and the measurements no longer return .... In the work you have to caress the wood, obviously only with manual tools, perfectly sharp chisels, fine sandpaper, precision tweezers, double magnifying glass (now I don't see it more closely). The gluing must also be very delicate and the excess glue must be removed immediately. For the hold compartments the thickness of the boards is 0.4 mm, and the glue must take hold on this minimum thickness ..... But this scale is very exciting for me! PeteB, mtaylor, laarmada and 3 others 6 Quote
giampieroricci Posted June 19, 2020 Author #40 Posted June 19, 2020 The bow light: Dali, KARAVOKIRIS, laarmada and 32 others 35 Quote
giampieroricci Posted July 13, 2020 Author #41 Posted July 13, 2020 I went a little bit further with the model. The false bridge: The beams of the first bridge: Edwardkenway, Barbossa, Bluto 1790 and 24 others 27 Quote
mtaylor Posted July 14, 2020 #42 Posted July 14, 2020 I have to keep reminding myself how small this model is compared the others you've done. Beautiful work you're doing. tkay11 and druxey 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
allanyed Posted July 15, 2020 #44 Posted July 15, 2020 This model would be impressive at 1:48. It is doubly so at this small scale. I will be following your build more closely now as it gives me hope in the possibilities of small scale builds. Allan mtaylor, BobG and giampieroricci 3 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU
giampieroricci Posted July 16, 2020 Author #45 Posted July 16, 2020 I started laying the first beams of the battery bridge: KentM, G.L., GrandpaPhil and 25 others 28 Quote
Edwardkenway Posted July 16, 2020 #46 Posted July 16, 2020 I can't stop being amazed at your superb work on the ship at this scale!! druxey, Rudolf, BobG and 1 other 4 Quote Current builds; Henry Ramey Upcher 1:25 Providence whaleboat- 1:25 HMS Winchelsea 1764 1:48 Completed: HM Cutter Sherbourne- 1:64- finished Triton cross section scratch- 1:60 - finished Non ship: SBD-3 Dauntless 1:48 Hasegawa -FINISHED
giampieroricci Posted July 22, 2020 Author #47 Posted July 22, 2020 compartiments du faux pont: Bluto 1790, Mike Y, KentM and 24 others 27 Quote
druxey Posted July 23, 2020 #48 Posted July 23, 2020 Don't drop and lose the Euro coin inside, please! Lovely work and progress, Giampiero. mtaylor and giampieroricci 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
giampieroricci Posted July 26, 2020 Author #49 Posted July 26, 2020 some small progress: oneslim, Edwardkenway, GrandpaPhil and 19 others 22 Quote
mtaylor Posted July 27, 2020 #50 Posted July 27, 2020 Such fantastic work in such a tiny scale. Your leve of detail is amazing. giampieroricci, Edwardkenway, bruce d and 1 other 4 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
giampieroricci Posted July 28, 2020 Author #51 Posted July 28, 2020 The oven: MEDDO, Dali, mtbediz and 23 others 26 Quote
albert Posted August 2, 2020 #52 Posted August 2, 2020 Hi Gianpiero great beautiful work. giampieroricci and mtaylor 2 Quote
Ainars Apalais Posted August 2, 2020 #53 Posted August 2, 2020 Amazing work. giampieroricci and mtaylor 2 Quote
giampieroricci Posted August 22, 2020 Author #54 Posted August 22, 2020 I went ahead with the work a bit. I completed the guns bridge. It is not very precise, I had to adapt some solutions with the drawings of the structure, some measures did not match, and above all there is a serious error in the fixing of the double pulley for the maneuver of the rudder which is not fixed to a beam, but I could not move it so as not to compromise the perpendicularity with the steering wheel. PeteB, Bluto 1790, PoulD and 9 others 12 Quote
giampieroricci Posted August 22, 2020 Author #55 Posted August 22, 2020 other photos Barbossa, rybakov, Mike Y and 19 others 22 Quote
BobG Posted August 22, 2020 #56 Posted August 22, 2020 WOW!! Incredible work! 😲 mtaylor, giampieroricci and Rudolf 3 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
druxey Posted August 22, 2020 #57 Posted August 22, 2020 That is a whole lot of beams! Lovely work. giampieroricci and mtaylor 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
mtaylor Posted August 23, 2020 #58 Posted August 23, 2020 So much detail at such a small scale. Love it. Edwardkenway, giampieroricci and druxey 3 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
giampieroricci Posted September 1, 2020 Author #59 Posted September 1, 2020 I went ahead with the work on the rudder: KARAVOKIRIS, SJSoane, Rudolf and 11 others 14 Quote
giampieroricci Posted September 1, 2020 Author #60 Posted September 1, 2020 Other photos: mtaylor, Mike Y, PeteB and 21 others 24 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.