Jump to content

HMS Pegasus 1776 by Trussben - 1:48 - Swan-class sloop based on TFFM


Recommended Posts

A wonderful picture. It's looking great.

Regards Christian

 

Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36

On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777

Paused: HMS Triton, 1771 - 1/48

"Have no fear of perfection - you'll never reach it." Salvador Dali

Link to comment
Share on other sites

stunning

Its all part of Kev's journey, bit like going to the dark side, but with the lights on
 

All the best

Kevin :omg:


SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS.
KEEP IT REAL!

------------------------------------------------------------------------------------------------------------------------------------------------------

On the build table

HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 

 

MHS Britannic by Kevin 

SD 14  - Marcle Models - 1/70 - March 2022 -  Bluebell - Flower Class - Revel - 1/72   U552 German U Boat - Trumpeter - 1/48  Amerigo Vespucci     1/84 - Panart-   HMS Enterprise  -CAF -  1/48     

Finished     

Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024

Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020

HMS Victory - Caldercraft/Jotika - 1/72 - Finished   Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 

Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat

Link to comment
Share on other sites

Very very nice work Ben!

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

  • 2 months later...

Thanks Everyone,

 

Work on the upper deck aft framing is almost complete and I just have to tie it in with the Wing Transom now.

Then there are the five trickier mid sections to complete the upper deck.

45E4877F-6FE6-450C-9F5E-9589814B09BB.jpeg

5C0F6908-8BDB-4D9D-989E-43615006FA64.jpeg

8B544913-C33C-4B27-947D-530F8751DDFD.jpeg

FA60A1F4-F2B5-4BF9-A345-1C588D68D483.jpeg

0DEE6995-851E-4953-B81C-7B097814C89C.jpeg

Link to comment
Share on other sites

Wonderfuk pictures of a beautyful model, Ben

Regards Christian

 

Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36

On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777

Paused: HMS Triton, 1771 - 1/48

"Have no fear of perfection - you'll never reach it." Salvador Dali

Link to comment
Share on other sites

Wow Ben, that is really nice work.  Your joinery is very precise.

Ryland

 

Member - Hampton Roads Ship Model Society

            - Ship Model Society of New Jersey

               - Nautical Research Guild

       

 

Current Build - Armed Virginia Sloop, 18th Century Longboat

Completed Build - Medway Longboat

Link to comment
Share on other sites

Great work Ben. I love it!

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Thanks All,

 

It always surprises me how that light pink of the good quality Swiss pear I got from Jeff darkens to that beautiful deep reddish hue after a few months, superb quality wood!

 I wish Jeff or someone of his caliber was still around, we shall miss him for a long time in this hobby!

 

ben

Link to comment
Share on other sites

That's a crazy great level of workmanship! I'm most impressed.

Other fruit woods darken with time including Cherry and Plum. I'm not sure about apple. You can take the ship out into bright sunlight if you want to speed it up, but be careful of shadows falling on the wood. They can leave a pale shadow on darkened areas.

Link to comment
Share on other sites

I wouldn't recommend 'sunning' a model. There are detrimental ultraviolet rays as well as heat - neither of which will do a model any good in the long run. Also, humidity levels wll drop in the sun, and Ben can tell you all about the trouble that can bring to a model!

 

Much of wood color change is due to surface oxidation from the atmosphere. It will darken wood over time indoors anyway.

Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series  http://trafalgar.tv

Link to comment
Share on other sites

Great work, Ben.

Toni


Chairman Nautical Research Guild

Member Nautical Research and Model Society

Member Midwest Model Shipwrights

 

Current Builds:     NRG Rigging Project

Completed Builds: Longboat - 1:48 scale       HMS Atalanta-1775 - 1:48 scale       Half Hull Planking Project      Capstan Project     Swallow 1779 - 1:48 scale               Echo Cross Section   

Gallery:  Hannah - 1:36 scale.

Link to comment
Share on other sites

I’m still working on the upper deck framing but I need to start thinking about the forecastle and Quarter deck beams and hooks, so using a new tool in the workshop that I have been learning, I cut all the beams out of some pear stock.

 

 

106CD0FB-F1DD-424B-8CB8-E5C04FF4F78A.jpeg

Edited by Trussben
Link to comment
Share on other sites

Very nice Ben. Now you just need to add a laser cutter to your arsenal. ;)

Rusty

"So Long For Now" B) 

 

Current Builds: Speedwell

 

 

Completed Build Logs:  HMS Winchelsea 1/48   Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Thanks

 

J - it’s a BobsCNC EVO4 and yes you have to assemble it which takes a few days to do it right.

Edited by Trussben
Link to comment
Share on other sites

  • 1 year later...

You  must be a glutton for punishment Ben, having both Pegasus and Winnie on the go at the same time! Either that or you have waaaay too much time on your hands! 😀

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...