Jump to content

HMS Atalanta 1775 by tlevine - FINISHED - 1:48 scale - from TFFM plans


Recommended Posts

Thanks, gentlemen.  I am now working on the stern quarter carving.  Hopefully that won't take more than a week.

Toni


Chairman Nautical Research Guild

Member Nautical Research and Model Society

Member Midwest Model Shipwrights

 

Current Builds:     Utrecht-1742

Completed Builds: Longboat - 1:48 scale       HMS Atalanta-1775 - 1:48 scale       Half Hull Planking Project      Capstan Project     Swallow 1779 - 1:48 scale      Echo Cross Section   NRG Rigging Project 

                           Utrecht-1742

Gallery:  Hannah - 1:36 scale.

Link to comment
Share on other sites

Beautiful workmanship Toni.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

  • 2 weeks later...

Karl, thanks for the tip.  Some beautiful carving on those models.  As my punch list has gotten smaller, I could not put off the upper quarter carving any longer.  On both the plan and the contemporary model I could not tell for certain what the creature was.  Because of the tail, I had to choose between a dragon and a lioness.  I decided upon a lioness because that is what Atalanta was turned into after she had sex in a temple.  The first thing I did was make an oversized mock-up of the carving out of Sculptey.  Then, I made a second mock-up that fit into the space.  Once I was satisfied with that I drew the outline on to a block of English boxwood.  The color was a good match for the costello boxwood and I wanted the extra strength because of the tail. 

255393095_UpperQuarterCarving1a.jpg.8a53a0229bb8acc0309c96bb286d3567.jpg

 

1582178540_UpperQuarterCarving2a.thumb.jpg.7a3547e810790eb45e333295d137d12a.jpg

 

1973807992_UpperQuarterCarving3a.jpg.ac95ccdb4af96eca7c9fdcdff55489a7.jpg

 

After a few failed attempts, the lioness slowly came out of the wood.  The hardest part was the head, both the direction and appearance.  Although in the pictures the face looks more like a bear than a lioness, it was the best I could do.  

 

191678687_UpperQuarterCarving4a.thumb.jpg.bb51877816495053ef0b3625c0875bbe.jpg

 

1482838017_UpperQuarterCarving5a.thumb.jpg.4ab77fd7d8e78169b81096b8d32959f2.jpg

 

1303373490_UpperQuarterCarving6a.thumb.jpg.b63fe83fb1ebf9fd1fb6e15778f5954f.jpg

 

Toni


Chairman Nautical Research Guild

Member Nautical Research and Model Society

Member Midwest Model Shipwrights

 

Current Builds:     Utrecht-1742

Completed Builds: Longboat - 1:48 scale       HMS Atalanta-1775 - 1:48 scale       Half Hull Planking Project      Capstan Project     Swallow 1779 - 1:48 scale      Echo Cross Section   NRG Rigging Project 

                           Utrecht-1742

Gallery:  Hannah - 1:36 scale.

Link to comment
Share on other sites

I debated back and forth whether I should put a flag on the ensign staff.  Although few models of this style are shown with flags, I decided to make one.  My reasons were that the model needed a pop of color and I had never made a flag before and wanted to see if I could do a good job.

 

The technique that follows is exactly what was demonstrated by Gus Augustin at an NRG Conference a few years ago.  I determined that the correct flag for 1775 was the red ensign.  I drew the outline onto both sides of a piece of plain copy paper with pencil.  Next, I cut the flag out, leaving extra paper inboards to make straps to secure the flag to the staff.  The flag was shaped by crushing it in my hand, being careful to leave the inboard edge flat. 

 

Flag1a.thumb.jpg.97f0c3e9d1596dc5e397d784caeda532.jpg

 

The flag was gently wet in a bowl of water and the crinkled shape was formed after laying the wet flag on a piece of glass.  I did not touch it again for a few days but Gus states that one should wait at least 24 hours.  The flag is then (sort-of) flattened and painted.  Start with the light colors and gradually go darker.  I used Poly-S and Model Master acrylic paints full strength. 

 

Flag2a.thumb.jpg.6f40acde29c7ccdafee5987350772941.jpg

 

Flag3a.thumb.jpg.19cebf700f564eebd6e6a03c76f36805.jpg

 

Flag4a.thumb.jpg.7a382a93eba73796a00a6ff8173ae7be.jpg

 

Flag5a.thumb.jpg.edaa15e2cac2f1fe56bdc718bc12af95.jpg

 

Once the flag was dry I air-brushed it very lightly with gray to soften the colors.  Finally, I reformed the flag and secured it to the staff.  Overall, I am pleased with the appearance.

 

Flag6a.thumb.jpg.afa6c1b7600469e53076645cdfe1b9e9.jpg

 

Flag7a.thumb.jpg.36c0046a1c78cf04e417d404a33be9fd.jpg

 

Flag8a.thumb.jpg.7846c895fdca94f96da4b5005e351880.jpg

 

 

Toni


Chairman Nautical Research Guild

Member Nautical Research and Model Society

Member Midwest Model Shipwrights

 

Current Builds:     Utrecht-1742

Completed Builds: Longboat - 1:48 scale       HMS Atalanta-1775 - 1:48 scale       Half Hull Planking Project      Capstan Project     Swallow 1779 - 1:48 scale      Echo Cross Section   NRG Rigging Project 

                           Utrecht-1742

Gallery:  Hannah - 1:36 scale.

Link to comment
Share on other sites

Greg had drawn it to my attention that when I rebuilt the rudder head cover I had forgotten to add the sill.  Greg, this one's for you!  You can also see the gunport tackle and tubes.  The tubes are made of leather which I simulated with rolled paper dyed with brown Rit.

734387663_Rudderheadcoverfinisheda.thumb.jpg.f7f62c2ad620132429923aafb653d68c.jpg

 

The rudder chain has been installed.  It attaches onto the spectacle plate with a U-shaped tackle.  The last things on my punch list are the figurehead, cleaning and paint touch-up.  After my experience with the upper quarter carving the figurehead has me terrified.  

 

2098622293_RudderChaina.thumb.jpg.883ad159301d3276653d46318da18490.jpg

Toni


Chairman Nautical Research Guild

Member Nautical Research and Model Society

Member Midwest Model Shipwrights

 

Current Builds:     Utrecht-1742

Completed Builds: Longboat - 1:48 scale       HMS Atalanta-1775 - 1:48 scale       Half Hull Planking Project      Capstan Project     Swallow 1779 - 1:48 scale      Echo Cross Section   NRG Rigging Project 

                           Utrecht-1742

Gallery:  Hannah - 1:36 scale.

Link to comment
Share on other sites

I have started work on the dreaded figurehead.  I decided to make her out of clay rather than attempt carving.  I felt sorry for the wood that I would butcher.  Thank you to Chuck for his clay sculpting lesson and thank you to David Antscherl for carving a figurehead of Atalanta for Chuck.  The photos he took and posted on MSW were a godsend.  Here is the link to those photos.  

 

This is a copy of one of Chuck's photos of Atalanta.  She is holding a golden apple in her right hand.  The first thing I did was make a wire armature.  This provided more strength to the arms and legs.  I mounted the armature over a mock-up of the stem.

 

atalanta figurehead2.jpg

Figurehead1a.thumb.jpg.8700cc3a46f4241a211cb9818846080a.jpg

Figurehead2a.thumb.jpg.79e843af333bdfa99ab513ae3316356b.jpg

Figurehead3a.thumb.jpg.5574b118903263d32b174aa95b16be2e.jpg

 

The first layer of clay was applied.  I was not too careful with this as it was simply a base to build upon.  I used white Sculpey clay with a few drops of softener added.  After every significant addition I baked the clay per the instructions to harden that section.  I think the biggest piece of advise that I can give is be careful with your proportions.  Stand in front of a mirror.  Your wrists hit the femoral head.  Measure a female hand for the correct length (mine is 6").    How long is your torso in relation to your legs, etc.  The breasts are not cones, as you can see in the picture above.   

Figurehead5a.thumb.jpg.39a202eeb7d3e967059b2c4d23a2574c.jpg

 

I decided to add the clothing and hair after I had the proportions correct, leaving the details of the hands, feet and face for last.

 

Figurehead6a.thumb.jpg.1f6d5857a037def091ed94955b8834b3.jpg

Figurehead7a.thumb.jpg.343171cd2171412ee85f4d3da87bcb43.jpg

Figurehead8a.thumb.jpg.343c0ecd3bdf3e1d4c254cf1dcabcc71.jpg

Figurehead9a.thumb.jpg.bed12dd0a9d477c49087324f9da9148e.jpg

 

After the other details were completed I test-fit the figurehead to the actual stem.  I discovered that I had forgotten to incorporate the taper of the stem on my mock-up and had to add extra clay to the medial thighs.  Obviously there is still some finesse work remaining.  I have a question for the members.  Should I paint it white to minimize losing detail or in natural colors (white robe, dark brown hair, tanned skin).  The apple will be gold, either way. 

Figurehead10a.thumb.jpg.6dc620b4cba8713574972f54257d3bf9.jpg

Figurehead11a.thumb.jpg.53ba0813244b15d427ea9593425e2de9.jpg

Figurehead12a.thumb.jpg.2c6ab3f871fd1020c11cf9a823aec92c.jpg

 

 

Toni


Chairman Nautical Research Guild

Member Nautical Research and Model Society

Member Midwest Model Shipwrights

 

Current Builds:     Utrecht-1742

Completed Builds: Longboat - 1:48 scale       HMS Atalanta-1775 - 1:48 scale       Half Hull Planking Project      Capstan Project     Swallow 1779 - 1:48 scale      Echo Cross Section   NRG Rigging Project 

                           Utrecht-1742

Gallery:  Hannah - 1:36 scale.

Link to comment
Share on other sites

Go with colors Toni

Kurt Van Dahm

Director

NAUTICAL RESEARCH GUILD

www.thenrg.org

SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS

CLUBS

Nautical Research & Model Ship Society of Chicago

Midwest Model Shipwrights

North Shore Deadeyes

The Society of Model Shipwrights

Butch O'Hare - IPMS

Link to comment
Share on other sites

Druxey, I think I can change her line of sight without too much problem.  The feet and hands and nose still need work, as well.

Toni


Chairman Nautical Research Guild

Member Nautical Research and Model Society

Member Midwest Model Shipwrights

 

Current Builds:     Utrecht-1742

Completed Builds: Longboat - 1:48 scale       HMS Atalanta-1775 - 1:48 scale       Half Hull Planking Project      Capstan Project     Swallow 1779 - 1:48 scale      Echo Cross Section   NRG Rigging Project 

                           Utrecht-1742

Gallery:  Hannah - 1:36 scale.

Link to comment
Share on other sites

That's good, Toni: she should be a bit more arched back towards the hair bracket. Make sure that the top of her head clears the underside of the bowsprit as well!

Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series  http://trafalgar.tv

Link to comment
Share on other sites

She actually looks nice looking a little bit lower - making sure the ship would not hit any underwater rocks. Captain would be pleased with her help! :)

 

 

Link to comment
Share on other sites

  • 2 weeks later...

Gentlemen, I appreciate all of your observations.  Although she still looks a little clunky compared with the masters on this site like Doris, it is the best I can do.  I promise you that I am a much better surgeon than a sculptress.  I have lowered the figurehead, making sure the bowsprit clears the top of her head.  I have also re-positioned her so that she looks to the horizon.  I started painting with a coat of acrylic gray primer.  The clay soaks up the paint and this helped seal it.  The rest of the painting was done with various acrylic paints.  The apple and the buttons on her skirt are gold leaf.  

Figurehead12a.thumb.jpg.6dd7e55a024ae5a6bbdf9b789d74f831.jpg

Figurehead13a.thumb.jpg.4c639994f2abc2e8c69978e012eb0028.jpg

Figurehead14a.thumb.jpg.0f50f8078b0f9e58a9e439539e03624d.jpg

Figurehead15a.thumb.jpg.55d5aa5e50dedccb3a06800ed97936ec.jpg

Figurehead16a.thumb.jpg.1cd7664ea6e803116ff7048c0c3323de.jpg

At this point all that remains is cleaning the ship, touching up the black paint on the wale and installing a base.  I do not plan on masting and rigging her.

Toni


Chairman Nautical Research Guild

Member Nautical Research and Model Society

Member Midwest Model Shipwrights

 

Current Builds:     Utrecht-1742

Completed Builds: Longboat - 1:48 scale       HMS Atalanta-1775 - 1:48 scale       Half Hull Planking Project      Capstan Project     Swallow 1779 - 1:48 scale      Echo Cross Section   NRG Rigging Project 

                           Utrecht-1742

Gallery:  Hannah - 1:36 scale.

Link to comment
Share on other sites

Toni, a real masterpiece. Well done. Have you considered adding short stub masts and bowsprit like some of the admiralty models do?  Just to show easily where they are located. 

 

Either way, a real beautiful ship

 

 

 

Edited by Dowmer

 

 

 

Able bodied seaman, subject to the requirements of the service.

"I may very well sink, but I'm damned if I'll Strike!" JPJ

 

My Pacific Northwest Discovery Series:

On the slipways in the lumberyard

Union, 1792 - 1:48 scale - POF Scratch build

18th Century Longboat - circa 1790 as used in the PNW fur trade - FINISHED

 

Future Builds (Wish List)

Columbia Redidiva, 1787

HM Armed Tender Chatham, 1788

HMS Discovery, 1789 Captain Vancouver

Santiago, 1775 - Spanish Frigate of Explorer Bruno de Hezeta

Lady Washington, 1787 - Original Sloop Rig

 

Link to comment
Share on other sites

Dowmer, I tried stub masts a while back and decided that I did not like how they looked.  But thanks for your suggestion.

Toni


Chairman Nautical Research Guild

Member Nautical Research and Model Society

Member Midwest Model Shipwrights

 

Current Builds:     Utrecht-1742

Completed Builds: Longboat - 1:48 scale       HMS Atalanta-1775 - 1:48 scale       Half Hull Planking Project      Capstan Project     Swallow 1779 - 1:48 scale      Echo Cross Section   NRG Rigging Project 

                           Utrecht-1742

Gallery:  Hannah - 1:36 scale.

Link to comment
Share on other sites

Beautiful work, Toni.  The figurehead is just fantastic.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Thanks gentlemen.  Druxey, a base is in the works.  I hope to have the materials in a few weeks.  As for a case...  

 

1795058941_Atalantaincase1a.thumb.jpg.18b99ca2e6821f87f920e256eb06ac9a.jpg

405403857_Atalantaincase2a.thumb.jpg.303a4e1b3d8df18dcb667e38cde12664.jpg

Toni


Chairman Nautical Research Guild

Member Nautical Research and Model Society

Member Midwest Model Shipwrights

 

Current Builds:     Utrecht-1742

Completed Builds: Longboat - 1:48 scale       HMS Atalanta-1775 - 1:48 scale       Half Hull Planking Project      Capstan Project     Swallow 1779 - 1:48 scale      Echo Cross Section   NRG Rigging Project 

                           Utrecht-1742

Gallery:  Hannah - 1:36 scale.

Link to comment
Share on other sites

Congratulations on the completion of an extraordinary Swan class model, Toni! You've done TFFM chapter and verse and my hats off to you.

Greg

website
Admiralty Models

moderator Echo Cross-section build
Admiralty Models Cross-section Build

Finished build
Pegasus, 1776, cross-section

Current build
Speedwell, 1752

Link to comment
Share on other sites

Very nicely done Toni.  What's next?

Maury

Link to comment
Share on other sites

Maury, I have a couple of things to keep me busy.  Atalanta still needs some final cleaning and touch-ups.  I also plan on doing a little more on the Echo x-section.  Finally, it is time to learn a little CAD so that I can loft my own plans.  Who knows what else I will come up with.

Toni


Chairman Nautical Research Guild

Member Nautical Research and Model Society

Member Midwest Model Shipwrights

 

Current Builds:     Utrecht-1742

Completed Builds: Longboat - 1:48 scale       HMS Atalanta-1775 - 1:48 scale       Half Hull Planking Project      Capstan Project     Swallow 1779 - 1:48 scale      Echo Cross Section   NRG Rigging Project 

                           Utrecht-1742

Gallery:  Hannah - 1:36 scale.

Link to comment
Share on other sites

That looks beautiful Toni.   It was a pleasure to follow you as you built it over the years.   :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...