Maury S Posted June 18, 2015 Share #1021 Posted June 18, 2015 In addition to what Druxey mentioned, I picked up a trick from Chuck Passaro re bending. I still spile rather than edge-bend, and have found a very good (hot) hair drier or iron works well for face bending and twisting. I hardly ever wet planks any more. Maury Canute, mtaylor, GLakie and 1 other 4 Quote Current diversion: Anchor Hoy c 1815 - 1825 1:48 scale Recent Builds: Fair American: 18th C. Longboat: http://modelshipworld.com/index.php?/topic/2284-longboat-18th-c-by-maury-modelshipways-by-chuck/ Echo Cross Section: http://modelshipworld.com/index.php?/topic/513-echo-cross-section-by-maury/ Emma C. Berry http://modelshipworld.com/index.php?/gallery/album/203-emma-c-berry-132-pof-by-maury/ Link to comment Share on other sites More sharing options...
mtaylor Posted June 18, 2015 Author Share #1022 Posted June 18, 2015 I've been reading and re-reading those tutorials as well as the Jim Roberts' book on planking. And I should add.. Dan's wisdom has helped immensely with this. I don't have issues, at this point, with the lining and spiling, or the bending and fitting of planks. What has been giving me fits until I started sketching out the area is where the stern ends of the planks start to come around the end of the hull to start landing on the transom. There's a fashion piece that covers the counter and the ends of the hull planks. After re-studying, re-thinking, the Licorne drawings just weren't detailed enough as I was cutting the fashion piece short by about 1/8" or so. Just enough that I was seeing gaps and not a happy camper with the appearance. I've delved into a couple of French frigate monographs and have sorted out that that the lower end of the fashion piece and plank ends are hidden by the quarter gallery drop. The solution was simple once I figured out what was needed... Now that the laser cutter is sorted out, I'm focusing on finishing up the wide planking... sanding... and hopefully pictures in a couple of days. After this, it's the garboard strake and then lining off the rest of the hull for the narrow planking. A bit of the pain to have several different widths of hull planking but it's sorting itself out. UpstateNY, CaptainSteve, WackoWolf and 15 others 18 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Jparsley Posted June 19, 2015 Share #1023 Posted June 19, 2015 Can't wait to see more She sounds a little complicated for my skill level Omega1234, GLakie and mtaylor 3 Quote USF Constellation 1/85 AL Jparsley Link to comment Share on other sites More sharing options...
mtaylor Posted June 24, 2015 Author Share #1024 Posted June 24, 2015 Some proof of life and work in progress.... I think I'm getting the hang of this.... I've planked both sides with required wide wale planks. The port side has been sanded but not finish sanded.. pretty rough sanded if you ask me, but it's ready for the narrow hull planks to be laid down. I need to sand the starboard side which should commence this afternoon... I hope. The stern/transom area I think I have sorted out. There's a covering piece needed and the fashion piece along the counter to the transom as well as the covering board where the transom meets the counter. These will be finished once the planking is complete but before final sanding.... The planks look a bit damp as I've wiped them down with some water to clear off most of the sanding dust and also to help raise the grain a tad. I've got a couple of pesky dings that need to be addressed and this is the logical (to my mind) starting point for that process. As always, clicking on the photos will enlarge them and comments and advice are welcome. On a side-note, I'm also developing drawings for the laser cutter to produce all the carving blanks, windows, gun carriages, carved railings, and assorted fiddly bits like the ship's boats. Some of this stuff is just too darn tiny to cut on a scroll saw.. or I need new eyes. wyz, BANYAN, Beef Wellington and 55 others 58 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Landlubber Mike Posted June 24, 2015 Share #1025 Posted June 24, 2015 Beautiful work Mark. Wow, this lady sure has a lot of curves! I can see how all the spilling, etc. takes plenty of time. Canute, mtaylor, Omega1234 and 2 others 5 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: Hs129B-2 1/48 SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Eduard Sikorsky JRS-1 1/72 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans) Link to comment Share on other sites More sharing options...
GLakie Posted June 24, 2015 Share #1026 Posted June 24, 2015 Your planking is looking mighty fine there Mark. Don't know what you could have been worried about, because it seems like you've got a good handle on it. Omega1234, Canute, WackoWolf and 2 others 5 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
Jack12477 Posted June 24, 2015 Share #1027 Posted June 24, 2015 I agree with George, Mark. Looking very good ! mtaylor, Omega1234, IgorSky and 2 others 5 Quote Jack "No one is as smart as all of us" - Is ón cheann a thagann an cheird The craft comes from the head --------------------------------------------- Current build: US Constellation Non-ship builds: USCG UH-65A Dolphin M16 Multi-gun motor carriage diorama M4A3 Sherman Tanks dioramas 1936-1939 Mercedes Benz 540K 1934 Rolls-Royce Phantom II JSDF Light Armor Vehicle Figures: The Last Bridge: Raider Reaper Edge of Universe: Ianis The Last Bridge: Vadim with cart Completed build log(s): 18th Century Longboat , Marie Jeanne, Willie L Bennett 1888 50 ft Gaff-rigged Ice Yacht Scratch Build The Sullivans (DD 537) Liberty Ship SS John W Brown USS England (DE 635), Artesania Latina Titanic Lifeboat Gallery: Swift , Armed Virginia Sloop, Santisima Trinidad Captain's Launch , 18th Century Longboat , Marie Jeanne Other: Rhinebeck Aerodrome Tour Link to comment Share on other sites More sharing options...
Omega1234 Posted June 24, 2015 Share #1028 Posted June 24, 2015 Hi Mark What a beauty! I especially love the hull when viewed from the stern quarter in the last photo. Good luck with the laser cutting as that'll definitely make life easier in the long run. All the best! Patrick Jack12477, mtaylor, Canute and 3 others 6 Quote MY SCRATCH BUILT MODELS ARE: Splendid Mega Yacht https://modelshipworld.com/topic/28576-splendid-by-omega1234-scale-1500-mega-yacht/ Majestic Mega Yacht https://modelshipworld.com/topic/28483-mega-yacht-majestic-by-omega1234-miniature/ Sapphire Mega yacht https://modelshipworld.com/topic/21088-sapphire-by-omega1234-1388-scale-mega-yacht-66m-8-inch-hull-length/?tab=comments#comment-639898 Genesis - Supersports Mega Yacht https://modelshipworld.com/topic/18168-genesis-by-omega1234-1300-49m-mega-yacht-8-inches-long-finished/?tab=comments#comment-559026http://modelshipworld.com/index.php/topic/14141-shadow-by-omega1234-scale-1300-luxury-60m-mega-yacht-8-inches-long/ SHADOW Luxury Motor Yacht http://modelshipworld.com/index.php/topic/11384-majellan-by-omega1234-luxury-37-metre-motor-yacht-miniature-7-inches-approx/ Majellan Luxury Motor Yacht http://modelshipworld.com/index.php/topic/9261Rainbow-j-class-racing-yacht/?p=273543 Rainbow J Class Racing Yacht Mystic Classic Motor Cruiser Symphony Ingomar Schooner: Scratch build Dorade Schooner: <p> Lennox Restoration Warship http://modelshipworld.com/index.php/topic/9577-pandora-cutaway-dockyard-style-miniature/?hl=pandora Link to comment Share on other sites More sharing options...
Jim Lad Posted June 24, 2015 Share #1029 Posted June 24, 2015 Wow! I think you're getting the hang of it too, Mark! John Jack12477, GLakie and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
mobbsie Posted June 25, 2015 Share #1030 Posted June 25, 2015 Well, you certainly sorted out that little problem Mark, lovely bit of work mate. Its as Jim said " looks like you getting the hang of it". Well done mate. Be Good mobbsie Jack12477, Canute, GLakie and 1 other 4 Quote mobbsie All mistakes are deliberate ( me ) Current Build:- HMS Schooner Pickle Completed Builds :- Panart 1/16 Armed Launch / Pinnace ( Completed ), Granado Cross Section 1/48 Harwich Bawley, Restoration, Thames Barge Edme, Repair / Restoration, Will Everard 1/67 Billings HMS Agamemnon 1781 - 1/64 Caldercraft Kit, HM Brig Badger, HM Bomb Vessel Granado, Thames Steam Launch Louise, Thames Barge Edme, Viking Dragon Boat Next Build :- Link to comment Share on other sites More sharing options...
BANYAN Posted June 25, 2015 Share #1031 Posted June 25, 2015 Coming along very nicely indeed Mark - she looks good with her skirts being added Laser cutter? Now that is getting radical cheers Pat Jack12477, mtaylor and GLakie 3 Quote If at first you do not suceed, try, and then try again!Current build: HMCSS Victoria (Scratch) Next build: HMAS Vampire (3D printed resin, scratch 1:350) Built: Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64) Link to comment Share on other sites More sharing options...
pete48 Posted June 25, 2015 Share #1032 Posted June 25, 2015 Very Cool Mark , She's looking really Good ,Nice work Best Regards, Pete IgorSky, mtaylor and GLakie 3 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
rafine Posted June 25, 2015 Share #1033 Posted June 25, 2015 Really nice looking planking Mark. Bob GLakie, mtaylor and IgorSky 3 Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
Jparsley Posted June 25, 2015 Share #1034 Posted June 25, 2015 very nice definate leaves me wanting to see more first lady that i wanted to see a skirt on lol joking but she looks to be a tough endevour but i think your up to the challenge mtaylor, Canute, GLakie and 1 other 4 Quote USF Constellation 1/85 AL Jparsley Link to comment Share on other sites More sharing options...
gjdale Posted June 25, 2015 Share #1035 Posted June 25, 2015 Very nicely done on the planking Mark. Can't wait to see your laser cutting results. mtaylor, GLakie, Canute and 1 other 4 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout Link to comment Share on other sites More sharing options...
dgbot Posted June 25, 2015 Share #1036 Posted June 25, 2015 Mark, you planking is flawless. That hull does look like it is a rough one for laying a straight plank. David B mtaylor and GLakie 2 Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/ Link to comment Share on other sites More sharing options...
popeye the sailor Posted June 25, 2015 Share #1037 Posted June 25, 2015 making some really nice progress with the planking Mark. GLakie and mtaylor 2 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch Link to comment Share on other sites More sharing options...
mtaylor Posted June 25, 2015 Author Share #1038 Posted June 25, 2015 Thanks for the "likes" and all the comments... Beautiful work Mark. Wow, this lady sure has a lot of curves! I can see how all the spilling, etc. takes plenty of time. Therein is part of the slowness of this. Every strake is needing spiling somewhere.... Your planking is looking mighty fine there Mark. Don't know what you could have been worried about, because it seems like you've got a good handle on it. I'll be sweating over this until it's done... Hi MarkWhat a beauty! I especially love the hull when viewed from the stern quarter in the last photo.Good luck with the laser cutting as that'll definitely make life easier in the long run.All the best!Patrick I'm liking the way the lines are coming out, myself. As for the cutter.. it's already been a help... and a source of aggravation and also fun. Coming along very nicely indeed Mark - she looks good with her skirts being added Laser cutter? Now that is getting radical cheers Pat I got to get a bit radical.. cutting out the stern decoration would have driven me to strong drink. Mark, you planking is flawless. That hull does look like it is a rough one for laying a straight plank. David B Indeed. I know what you mean about the roughness... I'm touching up the fairing as I plank. So far, so good. For those who might be curious and missed it... here's the review of the laser cutter: http://modelshipworld.com/index.php/topic/10711-micro-mark-microlux-laserknife-2525-–-a-review/ I've just started the tweaking process.. a new and better lens and lens mounting is coming in Friday. Maybe a higher power cutting tube next. I just never could leave anything including most of my cars as "stock". CaptainSteve, UpstateNY, Jack12477 and 4 others 7 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Jparsley Posted June 26, 2015 Share #1039 Posted June 26, 2015 Hhhhhmmmmmmm a new toy you have I seeeeee May have to befriend you and use your playthings someday lol Glad you have a new toy Hope you can get it down pat then you could charge dummies like me to make fun stuff GLakie, dgbot, Canute and 2 others 5 Quote USF Constellation 1/85 AL Jparsley Link to comment Share on other sites More sharing options...
augie Posted June 26, 2015 Share #1040 Posted June 26, 2015 Wow! I missed all the fun.....but I'm back. That is one heck of a turn at the counter. But you're making it look easy. She is coming alive! Well done, mate! GLakie and mtaylor 2 Quote Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956 Link to comment Share on other sites More sharing options...
giampieroricci Posted June 26, 2015 Share #1041 Posted June 26, 2015 Some proof of life and work in progress.... I think I'm getting the hang of this.... I've planked both sides with required wide wale planks. The port side has been sanded but not finish sanded.. pretty rough sanded if you ask me, but it's ready for the narrow hull planks to be laid down. I need to sand the starboard side which should commence this afternoon... I hope. The stern/transom area I think I have sorted out. There's a covering piece needed and the fashion piece along the counter to the transom as well as the covering board where the transom meets the counter. These will be finished once the planking is complete but before final sanding.... The planks look a bit damp as I've wiped them down with some water to clear off most of the sanding dust and also to help raise the grain a tad. I've got a couple of pesky dings that need to be addressed and this is the logical (to my mind) starting point for that process. 2-5a.JPG 2-5b.JPG 2-5c.JPG As always, clicking on the photos will enlarge them and comments and advice are welcome. On a side-note, I'm also developing drawings for the laser cutter to produce all the carving blanks, windows, gun carriages, carved railings, and assorted fiddly bits like the ship's boats. Some of this stuff is just too darn tiny to cut on a scroll saw.. or I need new eyes. Sorry Mark, I was looking at the third photo. By drawing on the background it seems to me that the strakes at the stern should have a more harmonious bending and not folded so neatly. Perhaps the transom should be tapered a little to avoid the edge so sharp. Or am I wrong? Salty Sea Dog, SkerryAmp, mtaylor and 2 others 5 Quote Link to comment Share on other sites More sharing options...
mtaylor Posted June 27, 2015 Author Share #1042 Posted June 27, 2015 Hhhhhmmmmmmm a new toy you have I seeeeee May have to befriend you and use your playthings someday lol Glad you have a new toy Hope you can get it down pat then you could charge dummies like me to make fun stuff I'd suggest you contact Chuck.... I have no desire to go commercial... I'm supposed to be retired. :D Wow! I missed all the fun.....but I'm back. That is one heck of a turn at the counter. But you're making it look easy. She is coming alive! Well done, mate! Thanks Augie. They still need work.... Sorry Mark, I was looking at the third photo. By drawing on the background it seems to me that the strakes at the stern should have a more harmonious bending and not folded so neatly. Perhaps the transom should be tapered a little to avoid the edge so sharp. Or am I wrong? post-76-0-90226300-1435170103.jpg You are correct. That was one of the things giving me problems. The plans for this area are a bit vague. I do plan on re-shaping and getting that curve in once the rest of the planks are on the transom. I purposely went thick on these planks so I could shape them correctly. I guess I wasn't clear about finish sanding after the planks are on. GLakie, Jack12477, mobbsie and 5 others 8 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Jparsley Posted June 27, 2015 Share #1043 Posted June 27, 2015 Lol I was just kidding Your girls looking great Bending around that transom is definitely a sharp bend but it looks good GLakie, Canute and mtaylor 3 Quote USF Constellation 1/85 AL Jparsley Link to comment Share on other sites More sharing options...
texxn5 Posted June 27, 2015 Share #1044 Posted June 27, 2015 Hi Mark, she's looking really good. How about some pictures of your new toy and what you can do with it.... John src, GLakie and mtaylor 3 Quote John Current Current Builds: US Brig Niagara on my website FINISHED BUILD LOGS: New Bedford Whaleboat - page on my Morgan Website: http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/ USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/ website US Brig Niagara Model http://www.niagaramodel.com website Charles W Morgan Model http://www.charleswmorganmodel.com website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com Link to comment Share on other sites More sharing options...
AnobiumPunctatum Posted July 4, 2015 Share #1045 Posted July 4, 2015 Happy birthday, Mark. Have a nice day with your family. mtaylor, Jack12477, RichardG and 1 other 4 Quote Regards Christian Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36 On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777 Paused: HMS Triton, 1771 - 1/48 "Have no fear of perfection - you'll never reach it." Salvador Dali Link to comment Share on other sites More sharing options...
Jack12477 Posted July 4, 2015 Share #1046 Posted July 4, 2015 Happy Birthday Mark. Hope you are enjoying yourself. mtaylor and GLakie 2 Quote Jack "No one is as smart as all of us" - Is ón cheann a thagann an cheird The craft comes from the head --------------------------------------------- Current build: US Constellation Non-ship builds: USCG UH-65A Dolphin M16 Multi-gun motor carriage diorama M4A3 Sherman Tanks dioramas 1936-1939 Mercedes Benz 540K 1934 Rolls-Royce Phantom II JSDF Light Armor Vehicle Figures: The Last Bridge: Raider Reaper Edge of Universe: Ianis The Last Bridge: Vadim with cart Completed build log(s): 18th Century Longboat , Marie Jeanne, Willie L Bennett 1888 50 ft Gaff-rigged Ice Yacht Scratch Build The Sullivans (DD 537) Liberty Ship SS John W Brown USS England (DE 635), Artesania Latina Titanic Lifeboat Gallery: Swift , Armed Virginia Sloop, Santisima Trinidad Captain's Launch , 18th Century Longboat , Marie Jeanne Other: Rhinebeck Aerodrome Tour Link to comment Share on other sites More sharing options...
IgorSky Posted July 4, 2015 Share #1047 Posted July 4, 2015 Hi Mark!Happy Birthday! Good luck always and everywhere for you!Igor. mtaylor 1 Quote My models in PROGRESS: Holland yacht-boeier by IgorSky - Scale 1/150 - BOTTLE , My COMPLETED models: Holland yacht-boeier by IgorSky - Scale 1/150 - BOTTLE , Three-mast schooner ATLANTIC - BOTTLE - 1/600 Scale, Captain Jack Sparrow arrives in Port Royal - BOTTLE - Scale 1/72, Boat with pirates - 1/72 scale - BOTTLE, Pilot cutter Jolie Brise - BOTTLE - Scale 1/240, Yacht J-class - BOTTLE - Scale 1/300 , Mini SIB - Yacht Jolie Brise and Lighthouse Fastnet Rock – BOTTLE – Scale 1/3000 , Schooner AMERICA - BOTTLE - scale ̴ 1/800 , Mini SIB - J-class Yacht - BOTTLE - scale 1/1000 , The Old Man and The Sea - BOTTLE - Scale 1/72 , Steam schooner LENA - BOTTLE - scale 1/290 , Koch - Russian polar ship - BOTTLE - 1/1000 , Typical boat of Mediterranean Sea - BOTTLE - Scale 1/200 , Lifeboat RS1 Colin Archer - BOTTLE - scale 1/230 , Yacht Spray of Captain Joshua Slocum - BOTTLE - 1/350 Scale , Two-mast yacht - BOTTLE - 1/1000 Scale My GALLERIES: Noname yacht-in-bottle, Two-mast yacht in bottle 1/1000 Scale, Yacht Spray of Captain Joshua Slocum - BOTTLE - 1/350 Scale, Mini SIB 001 - BOTTLE, Mini SIB 002 Catalan Ship - BOTTLE, Mini SiB 003 Typical boat of Mediterranean Sea 1/200 - BOTTLE, Koch - Russian polar ship - BOTTLE - 1/1000, Mini SIB 004 - 3 mast schooner Link to comment Share on other sites More sharing options...
Landlubber Mike Posted July 4, 2015 Share #1048 Posted July 4, 2015 Happy Birthday Mark! mtaylor, IgorSky and GLakie 3 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: Hs129B-2 1/48 SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Eduard Sikorsky JRS-1 1/72 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans) Link to comment Share on other sites More sharing options...
lb0190 Posted July 4, 2015 Share #1049 Posted July 4, 2015 (edited) Happy B day Mark. Your build looks awesome and is making me lean toward the dark side for my next build... Edited July 4, 2015 by lb0190 IgorSky, GLakie and mtaylor 3 Quote Regards, Larry ---------------------------------------------------- Current Build US Brig Niagara Completed Builds George W Washburn - 1890 Tugboat Future Builds 18th Century Longboat by MS HM Cutter Cheerful Wappen Von Hamburg by Corel If your not making mistakes, your not challenging yourself – my life has been full of challenges Link to comment Share on other sites More sharing options...
GLakie Posted July 4, 2015 Share #1050 Posted July 4, 2015 Happy Birthday Mark!! Hope it's a great one!! mtaylor, IgorSky and Jack12477 3 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.