glbarlow Posted December 1, 2021 #181 Posted December 1, 2021 I’ve done both, both work so it’s really your choice mtaylor, Old Collingwood and Jack12477 3 Quote Regards, Glenn Current Build: Don't know yet. Completed Builds: HMS Winchelsea HM Flirt (paused) HM Cutter Cheerful, Lady Nelson, Amati HMS Vanguard, HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose
Old Collingwood Posted December 1, 2021 #182 Posted December 1, 2021 I was going to add my Five Pence worth - with my Greyhound build - I just kept on adding brushed on layers onto the lower hull - till I was happy with the finish, if a smooth (grain less) finish is what you are after - I found it took several coats to achieve this (that was with a hairy stick mind) OC. mtaylor 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
allanyed Posted December 1, 2021 #183 Posted December 1, 2021 Mark, The dimension I am curious about is the moulded dimension at the top of the top timber. Sketch below. THANK YOU Allan Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU
Old Collingwood Posted December 1, 2021 #184 Posted December 1, 2021 6 hours ago, allanyed said: Mark, The dimension I am curious about is the moulded dimension at the top of the top timber. Sketch below. THANK YOU Allan Allan I guess that would be determined by what the actual thickness was of the actial part of the real ship, then just converted down into scale, hope that helps. OC. mtaylor 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
mtaylor Posted December 1, 2021 Author #185 Posted December 1, 2021 6 hours ago, allanyed said: Mark, The dimension I am curious about is the moulded dimension at the top of the top timber. Sketch below. THANK YOU Allan Looks to be about 4mm, Allan. Old Collingwood 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
mtaylor Posted December 1, 2021 Author #186 Posted December 1, 2021 Well.... I made a dog's breakfast of painting. Call it lack of experience as I haven't spray painted in decades. Need to sand and fill some spots. What looked ok yesterday showed that the low humidity here is creating a few problems. I'll sand, re-paint, and see what happens. I'm not upset, just focused on learning more and mistakes are part of learning or re-learning. DelF, AJohnson, zappto and 9 others 12 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
mtaylor Posted December 2, 2021 Author #187 Posted December 2, 2021 Yep, I had the building maintenance guy run his humidity meter for a bit. Foggy outside, inside it's dry as a bone. Picked up a humidifier and have it running. I'll re-fill the cracks, sand and go for the paint again in the morning. zappto and Old Collingwood 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
allanyed Posted December 2, 2021 #188 Posted December 2, 2021 Thanks Mark!! Is the 4mm with the planking or just the top timber itself? OC, Sorry for the confusion, my fault. I was only looking at what the kit dimension was as it appears heavy in the photo, but I know what it should be based on the scantlings for the size of the ship and era. I was curious to see if Vanguard got it right as this is often wrong on some kits. The top of the top timber for the 1745 Establishment and again in the Ship Builders Repository (1788) and Steel's Elements of Naval Architecture (1805) show it should be about 4 inches, which would be about 1.58 mm at 1:64. If the total with inboard planking, top timber, and outboard planking are measured, they would total about 3.5 mm at 1:64. Allan Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU
James H Posted December 2, 2021 #189 Posted December 2, 2021 Just get in there with some dilute acrylic wood filler, applied with a brush. Let it dry, sand then lightly re-coat. Repeat until happy 😉 Old Collingwood, Rustyj, AJohnson and 2 others 5 Quote SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! On the bench: Zip, nada! On Hold: HMS Winchelsea Double Capstan - Syren Ship Models - 1:48 Finished US Baltimore Armed Privateer Schooner Grecian 1812 (prototype) - Vanguard Models - 1:64 'Zulu' fishing boat, Vanguard Models - 1:64 Fifie' fishing boat, Vanguard Models - 1:64 HMS Flirt 1782, Vanguard Models - 1:64. Duchess of Kingston c.1780 - Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. 'Nisha' - The Brixham 'Mumble-Bee' - Vanguard Models 1:64 'Saucy Jack' fishing boat - Vanguard Models - 1:64 Ranger 'Barking Fish Carrier' - 1864 - Vanguard Models - 1:64 HMS Indefatigable - 1794 (production prototype), Vanguard Models - 1:64. HMS Harpy - 1796 (production prototype) - Vanguard Models - 1:64 Indeterminate: Tender Avos - Master Korabel - 1:72. H.M.S. Victory (production prototype) - Amati - 1:64. HMS Granado 1742 (cross section) - CAFModel - 1:48
mtaylor Posted December 2, 2021 Author #190 Posted December 2, 2021 Allan, that's the top timber only. Thanks James. That's basically what I'm doing. Jack12477, allanyed and Old Collingwood 3 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
mtaylor Posted December 4, 2021 Author #191 Posted December 4, 2021 Humidity seems stabilized and I've filling, sanding, checking, rinse and repeat seemingly forever. But, the white is done. and coated with two coats of flat clear. Needs a bit of touch up in a few places but that will wait until I'm done with the black just in case some gets pulled up with the tape removal. I did notice some areas where the tape didn't fully seal and one where the tape dipped a bit low... I'll fix when I do touch ups. So, I'm taking the rest of the day off to let everything sit and then attack the black wales and down to the waterline. I'll probably do the blue on the gallery windows but I may hold off on that. Jack12477, Edwardkenway, gjdale and 17 others 20 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
JeffT Posted December 5, 2021 #192 Posted December 5, 2021 Looking good Mark. All the effort is worth it. mtaylor and Old Collingwood 2 Quote Jeff In progress: Medway Longboat 1742 - Syren Ship Model Company -1/2" scale USS Constitution - Model Shipways - Scale 1:76 HMS Granado - CAF Model - 1:48 HMS Sphinx - Vanguard
TBlack Posted December 5, 2021 #193 Posted December 5, 2021 Mark, My experience with waterlines is a lot of fiddly work between black and white until it's right. So you're doing everything according to the book. Also, from this distance, the quarter galleries look good. Tom mtaylor and Old Collingwood 2 Quote
paul carruthers Posted December 5, 2021 #194 Posted December 5, 2021 10 hours ago, mtaylor said: Humidity seems stabilized and I've filling, sanding, checking, rinse and repeat seemingly forever. But, the white is done. and coated with two coats of flat clear. Needs a bit of touch up in a few places but that will wait until I'm done with the black just in case some gets pulled up with the tape removal. I did notice some areas where the tape didn't fully seal and one where the tape dipped a bit low... I'll fix when I do touch ups. So, I'm taking the rest of the day off to let everything sit and then attack the black wales and down to the waterline. I'll probably do the blue on the gallery windows but I may hold off on that. When masking I always add a coat of varnish over the tape before applying the colour, it helps prevent bleeding. Old Collingwood, mtaylor, AJohnson and 1 other 4 Quote
gjdale Posted December 5, 2021 #195 Posted December 5, 2021 The white is looking good Mark - well done. mtaylor, Old Collingwood and Jack12477 3 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout
AlanDavison Posted December 5, 2021 #196 Posted December 5, 2021 Hi Mark, its me again! Sorry,I am still concerned that your quarter galleries are still too high at the stern. Can I suggest that you check that when you can still fit the stern rails (step 237), the quarter gallery fretwork (step312) and the tile roof (step 319) as designed - I think you might have a problem, and if so, better sorted now that later. However if you are happy with what you are doing, then please continue, after all it your build. Just trying to be helpful. Alan Quote
mtaylor Posted December 5, 2021 Author #197 Posted December 5, 2021 Well, the voyage continues today. I've taped and varnished the edge of the tape to prevent bleed through. Once it dries and I"m satisfied with the fit and finish, I'll start laying down the black. I'm brushing not spraying as I feel I have more control and the area isn't as massive as the white. I'm also looking ahead in the instructions and the other logs and see there's an issue with friezes and some bits that are over them. Thinking this through as it might be best to add the friezes and then the overlaid wood can be "fitted" (time to dig out the files). 9 hours ago, paul carruthers said: When masking I always add a coat of varnish over the tape before applying the colour, it helps prevent bleeding. Yep. That's SOP on painting. I've had to re-learn some things as it's been a long time since I painted a ship. 5 hours ago, AlanDavison said: Hi Mark, its me again! Sorry,I am still concerned that your quarter galleries are still too high at the stern. Can I suggest that you check that when you can still fit the stern rails (step 237), the quarter gallery fretwork (step312) and the tile roof (step 319) as designed - I think you might have a problem, and if so, better sorted now that later. However if you are happy with what you are doing, then please continue, after all it your build. Just trying to be helpful. Alan I understand, Alan and thanks for the concerns. I taken your concerns seriously. Pretty much everything is somewhat fool proof with slots and tabs. I rechecked measurements, fit, etc. It's either spot on or darned close. The only possibility I can think of is that my stern might be a bit low. Looks like I have 4mm space at the narrowest point for the brass bit on top of the gallery. I need to dig that out and double check. BobG, Old Collingwood and GrandpaPhil 3 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Old Collingwood Posted December 5, 2021 #198 Posted December 5, 2021 On 12/2/2021 at 12:33 PM, allanyed said: Thanks Mark!! Is the 4mm with the planking or just the top timber itself? OC, Sorry for the confusion, my fault. I was only looking at what the kit dimension was as it appears heavy in the photo, but I know what it should be based on the scantlings for the size of the ship and era. I was curious to see if Vanguard got it right as this is often wrong on some kits. The top of the top timber for the 1745 Establishment and again in the Ship Builders Repository (1788) and Steel's Elements of Naval Architecture (1805) show it should be about 4 inches, which would be about 1.58 mm at 1:64. If the total with inboard planking, top timber, and outboard planking are measured, they would total about 3.5 mm at 1:64. Allan No problem Allan. OC. mtaylor 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Old Collingwood Posted December 5, 2021 #199 Posted December 5, 2021 Looking good Mark - always good when you get some paint on the Hull. OC. Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
mtaylor Posted December 6, 2021 Author #200 Posted December 6, 2021 Thanks for following along.... More paint... the black this time. Needs a few touch ups but I'm pretty happy at this point. Now to sort the red and blue at the top of the hull and how to work around a few "gotcha's" like not paint where things like the channels need to be and the issue of the decorations going under some various bits. Here's photos as she sits at the moment. KARAVOKIRIS, druxey, Jack12477 and 17 others 20 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Old Collingwood Posted December 6, 2021 #201 Posted December 6, 2021 Loving the contrast between the Black and White Mark - doing a fine job there. OC. mtaylor and Jack12477 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
mtaylor Posted December 6, 2021 Author #202 Posted December 6, 2021 Thanks OC. And thanks to everyone for the "likes". Jack12477 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Kevin Posted December 9, 2021 #203 Posted December 9, 2021 that is very nice indeed, Jack12477 and Old Collingwood 2 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - On hold MHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024 Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat
BobG Posted December 9, 2021 #204 Posted December 9, 2021 I just got caught up on your log, Mark. Wow...she's really coming along nicely and quickly! Well done! Old Collingwood and Jack12477 2 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
mtaylor Posted December 9, 2021 Author #205 Posted December 9, 2021 Well... I've mad a dog's breakfast of things. I had to move rails down as I indexed them on the wrong mark. Got out the isopropal and started then disaster. Seems the alcohol caused the acrylic black to run. For damage control, I'll put the rails back on where they shouild be and then fix with paint. I'm thinking blue to match the line from the galleries forward to the bow and then black up to the blue. <sigh> As I fond ot saying...."crap happens". Beef Wellington, Old Collingwood, Jack12477 and 5 others 5 3 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Glenn-UK Posted December 9, 2021 #206 Posted December 9, 2021 (edited) You could use yellow ochre between the blue and black. I did that on Speedy and it looked ok Edited December 9, 2021 by glennard2523 Ryland Craze, Old Collingwood, Jack12477 and 2 others 5 Quote Glenn (UK)
mtaylor Posted December 9, 2021 Author #207 Posted December 9, 2021 That would probably work also. I'll add it to my options. Jack12477 and Old Collingwood 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
gjdale Posted December 9, 2021 #208 Posted December 9, 2021 Sorry to hear that Mark - sounds like something I would do! The paint solution sounds like a good plan. Old Collingwood, AJohnson, Jack12477 and 1 other 4 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout
AJohnson Posted December 9, 2021 #209 Posted December 9, 2021 3 hours ago, mtaylor said: Well... I've mad a dog's breakfast of things. I had to move rails down as I indexed them on the wrong mark. Got out the isopropal and started then disaster. Seems the alcohol caused the acrylic black to run. For damage control, I'll put the rails back on where they shouild be and then fix with paint. I'm thinking blue to match the line from the galleries forward to the bow and then black up to the blue. <sigh> As I fond ot saying...."crap happens". Hi Mark, do you think the black has been absorbed deep into the wood grain? Just wondering if a sharp razor blade might scrape the surface clean, rather than paint it over. A subtle yellow ochre would do the trick if not. Also thank you for sharing with us your "whoops" moments, as a leading poster/builder on here, if you can share those moments, then that must encourage newcomers to reach out for help on MSW when they hit problems. 👍 👏 Jack12477, Canute, gjdale and 5 others 8 Quote Andrew Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) , HMAV Bounty - Caldercraft (1/64) Completed (Kits):- Vanguard Models (1/64) :- HM Cutter Trial , Nisha - Brixham trawler Caldercraft (1/64) :- HMS Orestes(Mars), HM Cutter Sherbourne Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight
JeffT Posted December 10, 2021 #210 Posted December 10, 2021 I probably would have had a lot of drinks after that Old Collingwood, mtaylor and Jack12477 3 Quote Jeff In progress: Medway Longboat 1742 - Syren Ship Model Company -1/2" scale USS Constitution - Model Shipways - Scale 1:76 HMS Granado - CAF Model - 1:48 HMS Sphinx - Vanguard
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.