Licorne 1755 by mtaylor - 3/16" scale - French Frigate - from Hahn plans - Version 2.0 - TERMINATED

[EJ_L]

Looking good Mark! Getting that inner planking to look good is always a challenge and not a fun one. Lots of time sanding, sanding and sanding some more in a tight space. You'll get there and it will look great!

[mtaylor]

Thanks for the likes and comments. It feels pretty good to be back in shop.

 

Still sanding but made a jig today for drilling the gunport holes for the eyebolts.  Pictures show front and back of next to the dummy cannon.  The eyebolts are them for reference only.

 

[Piet]

Good idea with that jig Mark.

 

Cheers,

[mtaylor]

I realized going through my parts box that I needed more hardware than what I had on hand... so... order off to Ages of Sail.  I also decided that my head isn't up to serious detailed lathe work nor running the noisy lathe with Janet not doing well at this point so I ordered the guns from Chuck.  

 

Now to go turn to and get the sanding finished, the holes for the hardware drilled (I also have to do the deck around the main mast and add bits and pieces).. oh.. and build my carriages for the cannon.  Gonna' be busy for awhile. 

[MEDDO]

Nice jig.  Great progress here

[CaptainSteve]

Great to see that you are back at it with gusto, Mark.

[popeye the sailor]

good to see your still making progress Mark.   the deck is looking very nice,  and that's a cool jig for the cannon hardware   

[JesseLee]

I've been silently following along Mark. Prayers for you both, glad to have you back in the shipyard. It is always interesting to read your research and see your attention to detail.

 

Jesse

[Chasseur]

Ditto and will pray for Janet as the Lord leads. It sucks when your spouse is sick. Hang in there Mark!

[rdsaplala]

Hi Mark,

 

Just catching up on your build, you've done a beautiful job on your hull and deck planking. 

Wow! You've really taken gone deep into the dark-side doing your own laser-cutting, excellent work on those laser-cut guns and carriages

[Omega1234]

Hi Mark

 

I can only echo everyone else’s sentiments about Janet and your Licorne.

 

All the best for Janet’s speedy recovery!

 

Cheers. 

 

Patrick

[mtaylor]

Thanks for the comments and the likes, everyone.  

 

I cleaned up the laser char on one carriage and assembled it.  Now to wait for the guns from Chuck... <patience grasshopper, patience>  I forgot how tiny and fiddly they are to assemble.  So when the guns get here, I'll adjust as needed and make the quoins so that they will all be at the same elevation.  I think this will be a slow process as it took me a couple of hours to clean off the char and fit everything.  Hopefully with a bit of practise, I'll pick up speed.

 

 

 

 

[rdsaplala]

Your prototype carriage looks great, Mark, I'm sure you'll pick up speed in no time at all once you start assembling the others.  I bet you're thankful that you chose to build a frigate rather than a hundred-gun three-decker now that you're at this stage of the build 

Edited February 4, 2018 by rdsaplala

[Wintergreen]

Yep, that's tiny. Looks good though.

Keep it up Mark :-)

[cog]

A few hours per ... some to be redone ... you'll be ready in no time, Mark ... meep, meep

[NenadM]

wow, wow, wooow !!!!

 

[BANYAN]

Great progress Mark, looks like you have those dockyard workers busy again.

 

cheers

 

Pat

[popeye the sailor]

let the assembly line begin    how many carriages did you make?  looks really good   

[Piet]

Yep, that piddly stuff takes a lot of time but in the end it's all well worth it Mark. Your first one sure looks good.

 

Cheers,

[mtaylor]

Thanks for the likes and the comments everyone.

 

Big day today... the rings came in and so did the guns from Chuck.  I ordered 24 of the appropriate size for the 8 pdrs and also ordered the 6 pdrs.   Yes, they're for an English ship but given the actual size and normal viewing length, I think they'll work perfectly.  Here's a couple of pics.   I will have to make quions now that I know the proper dimensions for them.  This should be a lot of fun.  Time go dig out the Birchwood-Casey and start blackening everything.  

 

I do plan on blackening and fitting the guns (temporarily) to the carriages but not actually installing the barrels until the upper deck and the channels and iron work for the shrouds are in place.  I'll put the carriages in place and lock them down with glue and a "safety" post through the deck.  Having a cannon and/or carriage come loos after the deck above it is in place is not fun in my book.  Been there, done that, built my vocabulary in an ungentlemanly way.

 

[Srodbro]

I doubt any French Captains would have turned up his nose at having British guns on his ship. 

[Landlubber Mike]

Looks great Mark!

[Vivian Galad]

Great work, Mark! 

 

[mtaylor]

Thanks for the likes and comments.   

 

Thanks Steve. I suspect that you're right except cannon balls might have been an issue.

 

Nice to you see back Vivian, it's been awhile, I hope all is well.

 

After looking over the cannon barrels carefully, the thinking light came on.. and sometimes I hate that when it happens.   It does look like a little work and these could be pure French cannon.   I'll have to take one of the extra 4 pdrs, and test when I get a bit of breathing space.

 

 

Edited February 9, 2018 by mtaylor

[Hubac's Historian]

Nice progress, Mark!  I’m looking forward to seeing what you have in mind for these guns.

[mtaylor]

Marc,  I remembered that turned my Constellation guns from something weird (the stock guns in the kit don't even resemble actual cannon) into Parot Rifles, etc.  I just need to chuck them up in either my Dremal or lathe and carefully use a fine file.  I should be able to remove the reinforcing rings and reshape the snout a bit to match the French guns of the period.   I just need to find the time.  

[Old Collingwood]

That cannon looks superb  great stuff.

 

OC.

[src]

Looking good Mark, Lots of progress since I was able to check in last. Hope Janet is feeling better.

Sam

[Kevin]

mark at long last i have caught up with you log, i think it was June last year that i last did so, perhaps i should be thrown out of MSW for my absence, if however you wish me to stay, then i would like to say she looks brilliant well done

[flying_dutchman2]

The barrel and the carriage look great. Couple of those on the deck is going to look good.  Initially I thought of adding canons to the Utrecht but in the end omitted this as the boat is a pleasure yacht eventhough the plans call for it. Now that I see what Chuck's material looks like, once I do a fluit, I will order them from him. 

Marcus