Tim Moore Posted January 30, 2022 Share #271 Posted January 30, 2022 Awesome production Yves. So crisp and clean. lmagna, mtaylor, Old Collingwood and 2 others 5 Quote Tim Moore Perfect is the enemy of good In progress IJN Pre-Dreadnought Battleship Mikasa, 1:200, Hobby Boss On Deck DH.9a Ninak, 1/32, Wingnut Wings The Blue Sky Company, 1:48, Sierra West Models Completed Fiat 806 Grand Prix 1:12, Italeri; Fifie 1:32, Amati Victory Model; HMS Bounty 1:48, Artesania Latina; Endeavour 1:60; Corel; Miss Severn 1:8, Legend Model Boats; Calypso, Billing Boats; Carmen Fishing Trawler, A.L. ; Dallas Revenue Cutter, A.L., Bluenose, A.L. Link to comment Share on other sites More sharing options...
yvesvidal Posted February 4, 2022 Author Share #272 Posted February 4, 2022 (edited) We are getting very close to the end of this project as far as we can ever finish a ship model, especially when using a large scale such as 1/48th. The Module #6 (the rear deck) is almost complete, with its depth charges, chutes and ejectors: I understand that for some modelers, this rear deck seems a little bit empty and I completely agree with that opinion. I wish the kit provided the famous "Smoke Float Canisters" which are usually sitting on top of the depth charge chutes. I tried to study a few pictures of the stern of Snowberry, but could not get much in term of details or equipment. Most of the pictures I have seen are crowded with sailors, making it difficult to see what is installed on the deck. I should definitely place some ropes, laying on the deck.... A view of the rudder: The flag is made with silk paper printed on a color laser printer. This technique has been described by Chuck, a few times and provides a nice rendering of a "floating in the wind" ensign. I will try to post more overall pictures of the model, to conclude this build log. Yves Edited February 4, 2022 by yvesvidal captain_hook, gjdale, scrubbyj427 and 11 others 14 Quote Link to comment Share on other sites More sharing options...
AON Posted February 4, 2022 Share #273 Posted February 4, 2022 convincingly life like BZ king derelict, Old Collingwood, Canute and 1 other 4 Quote Alan O'Neill "only dead fish go with the flow" Ongoing Build (31 Dec 2013) - HMS BELLEROPHON (1786), POF scratch build, scale 1:64, 74 gun 3rd rate Man of War, Arrogant Class Member of the Model Shipwrights of Niagara, Niagara Region, Ontario, Canada (2016), and the Nautical Research Guild (since 2014) Associate member of the Nautical Research and Model Ship Society (2021) Offshore member of The Society of Model Shipwrights (2021) Link to comment Share on other sites More sharing options...
realworkingsailor Posted February 4, 2022 Share #274 Posted February 4, 2022 12 minutes ago, yvesvidal said: I understand that for some modelers, this rear deck seems a little bit empty and I completely agree with that opinion. I wish the kit provided the famous "Smoke Float Canisters" which are usually sitting on top of the depth charge chutes. I tried to study a few pictures of the stern of Snowberry, but could not get much in term of details or equipment. Most of the pictures I have seen are crowded with sailors, making it difficult to see what is installed on the deck. I should definitely place some ropes, laying on the deck.... Would this help: (HMCS Sackville for those who are curious) There's a closeup photo in this article Andy Old Collingwood, AON, rvchima and 5 others 8 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
Ian_Grant Posted February 4, 2022 Share #275 Posted February 4, 2022 (edited) Super super model! I still think it would make a magnificent RC model. Pardon my ignorance on corvettes, but I'd have thought they'd carry as many depth charges as possible. The visible count seems low to me. Were more reloads stored below deck? EDIT Out of curiosity I googled it 🙄 the flower class carried 70. I guess some were below. Edited February 4, 2022 by Ian_Grant Canute, Old Collingwood, mtaylor and 2 others 5 Quote Link to comment Share on other sites More sharing options...
lmagna Posted February 4, 2022 Share #276 Posted February 4, 2022 (edited) 8 minutes ago, Ian_Grant said: The visible count seems low to me. Were more reloads stored below deck? If you looks at walkthroughs of HMCS Sackville you will see that they are slowly placing additional DCs in all kinds of places along companionways at each "upgrade" in her restoration. I suspect that this was the case in WWII as well and when the ship left port it would have them stuffed into any nook and cranny that worked, I think this is a work in progress. Edited February 4, 2022 by lmagna Canute, mtaylor, Old Collingwood and 1 other 4 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
yvesvidal Posted February 4, 2022 Author Share #277 Posted February 4, 2022 (edited) 2 hours ago, realworkingsailor said: Would this help: Not really. Sackville is a completely different beast and much more modern vessel. I have studied the pictures of Sackville and I have to say that I am really impressed by how the Canadian museum association have restored that vessel. In retrospect, building the Sackville instead of the Snowberry would have been a lot easier. However, the virtual kit does not have a lot of parts that can be found on the Sackville. Yves Edited February 4, 2022 by yvesvidal lmagna, mtaylor, king derelict and 2 others 5 Quote Link to comment Share on other sites More sharing options...
realworkingsailor Posted February 4, 2022 Share #278 Posted February 4, 2022 Sackville is only a year newer😜 I was more trying to help with the smoke cans on the stern, which are visible on her. Was there some drastic change in equipment? Andy AON, mtaylor, Canute and 2 others 5 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
Landlubber Mike Posted February 4, 2022 Share #279 Posted February 4, 2022 Yves, great job! For the stern area, have you looked at the instruction manual for the kits that are out there? They might be of some help. I have the 1/72 and 1/144 Revell kits if you need any of that info. Someone on Shapeways has a number of Flower Class Corvette detail items too if you're interested. Old Collingwood, mtaylor, lmagna and 2 others 5 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 Eduard Sikorsky JRS-1 1/72 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans) Link to comment Share on other sites More sharing options...
Kevin Posted February 4, 2022 Share #280 Posted February 4, 2022 lmagna, mtaylor, Old Collingwood and 4 others 7 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 HMHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished St-Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat Link to comment Share on other sites More sharing options...
Kevin Posted February 4, 2022 Share #281 Posted February 4, 2022 yvesvidal, rvchima, Old Collingwood and 5 others 8 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 HMHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished St-Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat Link to comment Share on other sites More sharing options...
yvesvidal Posted February 5, 2022 Author Share #282 Posted February 5, 2022 Thank you Kevin. Yes, I wished these would be available in the kit. I am no expert with 3D modelling (actually completely ignorant...) and thus I would have to procure these Smoke Floats from another source. Yves lmagna, Kevin, Old Collingwood and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Kevin-the-lubber Posted February 5, 2022 Share #283 Posted February 5, 2022 I'm easily distracted.... and a bit bored with what I'm doing today 🙂. You should be able to print these in FDM, probably want to put some supports for the side holes. I have no idea what these look like in the flesh so did one with a bottom, one without, and the F360 file is there too in case you have someone to tweak it. smoke float.zip Old Collingwood, yvesvidal, Kevin and 4 others 7 Quote Current builds: 1) HMS Victory 1:100 (Heller) https://modelshipworld.com/topic/23247-hms-victory-by-kevin-the-lubber-heller-1100-plastic-with-3d-printed-additions/ 2) Bluenose II 1:100 (Billing) - paused, not in the mood https://modelshipworld.com/topic/30694-billing-bluenose-ii-1100-no600-by-kevin-the-lubber/ 3) Cutty Sark 1:96 Revell https://modelshipworld.com/topic/30964-cutty-sark-by-kevin-the-lubber-revell-196 Stash: Revell Cutty Sark 1/96 (a spare for later) Revell Beagle 1/96 (unlikely to ever get built!) Revell Kearsage 1/96 (can't wait to get started on this) Revell Constitution 1/96 If at first you don't succeed, buy some more tools. Link to comment Share on other sites More sharing options...
yvesvidal Posted February 7, 2022 Author Share #284 Posted February 7, 2022 Thank you Kevin for the drawings of the smoke float and Kevin-the-lubber for this great 3D rendering of the devices. I have made some progress with Meshmixer and know how to move, rotate, resize and cut planes. I will get to these devices to finalize the Corvette. Yves Canute, Old Collingwood and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
yvesvidal Posted February 7, 2022 Author Share #285 Posted February 7, 2022 (edited) Well, it is also time to conclude on the building of this virtual kit. Overall, it has been a fantastic journey and it has given me an opportunity to learn a lot of new technologies and become familiar with 3D printing. The kit in itself may seem crude but it provides a wonderful platform for an infinite amount of details and variants of these legendary vessels. It is not exactly inexpensive, but compares very favorably with the vast majority of 1/350 or 1/200 plastic scale models with their PE pimping kits. Let's do a quick recap of the cost: License with hundreds of parts: $ 50 3 spools and a half of PLA filament: $ 67 2 cans of automotive primer for the hull: $ 20 Tamiya: Five large bottles of Flat White, one bottle of Matte black, two bottles of dark grey and a couple of various colors. Lots of glue for plastic and CA glue. About $30 of wood strips and dowels 100 Caldercraft stanchions - 10 bags at $9 each - By far the most expensive item.... Amati propeller in bronze $12 Hundreds of printing hours and assembly....but that is part of the fun. The kit can be made with basically three spools of PLA if you are very careful and do not waste any. PLA is very affordable and is actually the cheapest material in this kit. It also offers the characteristics to bio-degrade if you ever bury your model in the dirt: after 50 years, not much will be left. This can be important when compared with Polystyrene kits and models that will not disappear unless they are recycled and turned into bumpers, plastic bottles or other consumer parts. The BENSWORX virtual kit comes with an excellent assembly guide and offers a plethora of parts, with a few minor exceptions. Most of the parts can be printed on a PLA printer. I would recommend fine and detailed parts to be printed in a resin printer, for better surfacing. Although it was not my objective, I really enjoyed pimping up this kit and trying to improve it in some simple ways. It offers a great foundation for modelers willing to recreate mini action scenes and large dioramas at 1/48th scale. More than anything else, it provides a terrific platform for Radio Control and navigation on a lake or pond. For rivets counters, procuring some parts (at great expense) from Shapeways or other printing shop may be a great way to sink your bank account and turn this virtual kit into a museum piece. From Spools to model: I am going to stop at this stage, even though more hours could be dedicated to this model. I may add the smoke floats that were kindly provided by the two Kevin's from England, at a later time. Will there be another Virtual kit presented on this forum? You bet there will and parts are already printing.... It will be another crazy and very unusual project. But in the meantime, I'd like to go back to HMS Bellona and make some progress on it. Yves Edited February 7, 2022 by yvesvidal captain_hook, AJohnson, gjdale and 16 others 12 7 Quote Link to comment Share on other sites More sharing options...
Kevin-the-lubber Posted February 7, 2022 Share #286 Posted February 7, 2022 Meshmixer... you're doing better than me, that programme is still a dark art to me. But apparently very very good when you know how to use it. These were a very simple and quick job in F360, it honestly only took about 10 or 15 minutes, so if Meshmixer doesn't give you what you want I'll happily modify at this end. Just post a sketch or message me. Ryland Craze, yvesvidal, mtaylor and 2 others 5 Quote Current builds: 1) HMS Victory 1:100 (Heller) https://modelshipworld.com/topic/23247-hms-victory-by-kevin-the-lubber-heller-1100-plastic-with-3d-printed-additions/ 2) Bluenose II 1:100 (Billing) - paused, not in the mood https://modelshipworld.com/topic/30694-billing-bluenose-ii-1100-no600-by-kevin-the-lubber/ 3) Cutty Sark 1:96 Revell https://modelshipworld.com/topic/30964-cutty-sark-by-kevin-the-lubber-revell-196 Stash: Revell Cutty Sark 1/96 (a spare for later) Revell Beagle 1/96 (unlikely to ever get built!) Revell Kearsage 1/96 (can't wait to get started on this) Revell Constitution 1/96 If at first you don't succeed, buy some more tools. Link to comment Share on other sites More sharing options...
yvesvidal Posted February 7, 2022 Author Share #287 Posted February 7, 2022 Final photo shoot, the 1/48th scale fleet: Corvette and U-Boot: And a trip in time back to the XVIII century: Comparing these vessels is quite interesting.... the 74 guns period ships were just monstrous !! I hope you enjoyed the Virtual kit building and my wish is that more models and kits will slowly become available. It is definitely a technology that deserves a lot of attention. Yves Ian_Grant, Ryland Craze, bruce d and 19 others 18 4 Quote Link to comment Share on other sites More sharing options...
Kevin Posted February 7, 2022 Share #288 Posted February 7, 2022 very well done, lol wats next? Canute, mtaylor, lmagna and 2 others 5 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 HMHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished St-Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat Link to comment Share on other sites More sharing options...
lmagna Posted February 7, 2022 Share #289 Posted February 7, 2022 You have certainly created an inspiring model Yves. I have no idea how you resisted the temptation to RC it and the ability to see it operate in it's proper element now and then. But all that aside the achievement and the talent it took to obtain it is nothing short of amazing. I bought my grandson a 3D printer for Christmas and we put it together a few weeks ago. Your build makes me want to sneak into the other room and take it over for my own nefarious ends! Can't wait to see what you print up and build next. Canute, Ian_Grant, rvchima and 6 others 8 1 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
king derelict Posted February 7, 2022 Share #290 Posted February 7, 2022 Absolutely beautiful Yves. You took the base kit to a whole new level of detail and finesse. Having worked with the PLA plastic I can really applaud your finished model. It is difficult stuff to work with. I need to continue along the road with my more pedestrian effort. I use your build log constantly for inspiration. The virtual kit is a great concept and I would like to see more development in the field. Alan yvesvidal, mtaylor, Ryland Craze and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Landlubber Mike Posted February 7, 2022 Share #291 Posted February 7, 2022 (edited) Great job Yves! Thanks for sharing the adventure with us - it demystified a lot of this 3D printing stuff for me. Looks great next to the sub! Edited February 7, 2022 by Landlubber Mike Old Collingwood, lmagna, mtaylor and 3 others 6 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 Eduard Sikorsky JRS-1 1/72 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans) Link to comment Share on other sites More sharing options...
ccoyle Posted February 7, 2022 Share #292 Posted February 7, 2022 Super end result! Ryland Craze, Canute, Old Collingwood and 4 others 7 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, Hawker Hurricane Link to comment Share on other sites More sharing options...
mtaylor Posted February 7, 2022 Share #293 Posted February 7, 2022 Wow... that made a great model and as for the fleet.... I'm speechless. yvesvidal, Old Collingwood, lmagna and 4 others 7 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
bdgiantman2 Posted February 7, 2022 Share #294 Posted February 7, 2022 I enjoyed following this build, the Snowberry turned out great. You did a great job mixing the wood decking and metal (plastic) decking. Congrats on completing this ship model. mtaylor, Old Collingwood, Canute and 4 others 7 Quote Link to comment Share on other sites More sharing options...
AJohnson Posted February 7, 2022 Share #295 Posted February 7, 2022 Great looking model! 👏 mtaylor, Canute, Old Collingwood and 4 others 7 Quote Andrew Current builds:- HM Cutter Trial - Vanguard models (1/64), HMAV Bounty - Caldercraft (1/64), Hawker-Typhoon-1b-"Car-Door" - Airfix (1/24) Completed (Ship):- "Nisha" - Vanguard Models (1/64), HMS Orestes (Mars) - Caldercraft (1/64), HM Cutter Sherbourne - Caldercraft (1/64), TSS Earnslaw - Paper Shipwright (1/250), Puffer "Starlight" - Paper Shipwright (1/250) Completed (Non-Ship):-Blackburn Buccaneer S.2C - Airfix (1/48), Bristol Beaufort - Airfix (1/72), Mosquito B.XVI - Airfix (1/72), , Sea-Harrier-FRS1 - Airfix (1/72), Grumman F6F-5 Hellcat - Airfix (1/24), De Havilland Chipmunk T.10 - Airfix (1/48), Flamborough Head Lighthouse - Paper Shipwright (1/250) Link to comment Share on other sites More sharing options...
G.L. Posted February 8, 2022 Share #296 Posted February 8, 2022 Beautiful work , Yves! mtaylor, lmagna, Dave_E and 2 others 5 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24 Link to comment Share on other sites More sharing options...
clearway Posted February 8, 2022 Share #297 Posted February 8, 2022 Old Collingwood, Jack12477, mtaylor and 2 others 5 Quote Link to comment Share on other sites More sharing options...
yvesvidal Posted February 8, 2022 Author Share #298 Posted February 8, 2022 (edited) I was just weighing the Corvette model and it came at 3.163 Kgrs. Knowing that each spool of PLA is 1 Kgr and that I had to use 3 spools, the amount of PLA seems right. The excess weight are the stanchions, wood parts, propeller (brass 60 mm diameter) and paint. Yves Edited February 8, 2022 by yvesvidal Kevin, lmagna, Dave_E and 5 others 8 Quote Link to comment Share on other sites More sharing options...
Canute Posted February 10, 2022 Share #299 Posted February 10, 2022 You've turned out a beauty, Yves. Well done. 👍 lmagna, king derelict, Jack12477 and 3 others 6 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
CDW Posted February 10, 2022 Share #300 Posted February 10, 2022 I have enjoyed following this build so much. Your finished model is superb, Yves. Ian_Grant, king derelict, Canute and 2 others 5 Quote Completed Projects: USS Fletcher 1:144 Scharnhorst 1:350 USS Independence LCS-2 1:350 1:32 J7W1 Shinden Interceptor/Fighter Fairey Swordfish Mk. II 1:48 Harbor Tug Box Scale Albatros D.V 1:32 Ala-Kart 1:25 Ferrari 250 GT California Spyder 1:24 S-100 Schnellboot 1:72 Mercury Capsule and Atlas Booster BR-52 Steam Locomotive 1:35 Triumph 3 HW Motorcycle 1:9 Scale F-16XL-2 Experimental Fighter Bomber 1:48 Rafale 1:48 F-15E Strike Eagle 1:48 Petlyakov PE-2 Soviet Dive Bomber 1:48 TBM3 Avenger 1:32 1931 Cadillac 1:25 Scammell Pioneer SV2S Heavy Breakdown Tractor 1:35 M-50 Israeli Sherman 1:35 Military Wrecker 1:32 Delahaye 135 1:24 Toyota Sard Supra GT 1:24 Enzo Ferrari 1:24 1970 Baldwin Motion Camaro 1:25 1966 Ford Galaxie 500 Stock Car 1:25 American LaFrance Eagle Fire Pumper 1:25 1940 Ford Standard Coupe 1:25 VolksWagen Dragster/Dune Buggy/Street Rod 1:25 Kawasaki Ninja H2 Carbon 1:12 Porsche GT-1 Evo 1:24 Scharnhorst 1940 1:700 IJN Akitsushima Seaplane Tender 1:700 HMS Hood 1941 1:700 Prinz Eugen 1942 1:700 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.