Licorne 1755 by mtaylor - 3/16" scale - French Frigate - from Hahn plans - Version 2.0 - TERMINATED

[mtaylor]

I know you and John are right and we are our own worst critics.  I was showing the admiral the model today.  After looking it over carefully, She said she liked the caulking.  What?????????????????   :D      

 

So no more beating myself up. 

[src]

 

  Seems I can't leave anything "stock"...

 

Hmmm Perhaps you should look into a Fiber Optic laser upgrade?????

:P

 

Merry Merry and Happy Happy

Sam

[GLakie]

Hello guys,where can I find how to make stained/colored glue?Nice blog and build!!

 

Zoltan

I've matched colors by sanding the same type of wood and making a fine dust that I'd mix with stainable PVA glue. Good for repairing splinters, gouges, or even building up small areas of an edge. If you want odd colors, you can try food coloring. It'll mix with PVA, and or water.

Edited December 27, 2015 by GLakie

[mtaylor]

Thanks for the "likes" and the comments.

 

 

Hello guys,where can I find how to make stained/colored glue?Nice blog and build!!

Zoltan

 

Zoltan,

The idea for this is EdT's.  I think it's in his Naiad log.   Basically, paint pigment (about a teaspoon per 8 oz. of PVA).  Make a slurry with a bit of water and PVA and then mix well with the rest of the glue. 

 

 

Hmmm Perhaps you should look into a Fiber Optic laser upgrade?????

:P

 

Merry Merry and Happy Happy

Sam

 

That's not an upgrade Sam. That's a whole new cutter and pricey...  champagne (Dom Perignon) on a cheap beer budget.    :D  

 

 

Well.. the cutter upgrade is done, I'm happy with it.   Now I'm mocking up the quarter galleries and the stern trims since they're tied together and need to flow together.  The pictures of the Hahn model  look like what's on the plans (a bit grainy in black and white but no details on the "how").  The Le Venus and Belle Poule galleries are slightly different in that they don't sweep up towards the stern in a gentle curve.  The NMM plans show the curve but again no details.  Same for between the stern windows.. no details on the NMM plans.  Hahn just did plain wood where as the monographs show a fillister type of decoration between the windows.  Decisions, decisions.. 

[popeye the sailor]

....told you about that 'inner critic'........he'll bring you down man!      you should be looking up!  she's looking great!   still can't wait till she's finally off the slip and on her Keel.   those darker marks ain't nothing.......once you put the Gundgeons, pintles, and rudder in place.......and then add the depth markers,  you'll never see them.   Janet's a smart lady    

[mtaylor]

A bit of an update.  First off, here's hull "right-side up".... I'm liking the way she looks.

 

 

I removed some of the build board material around the transom area to give me some working room. If you'll go back to previous pictures, the transom is actually glued to the build board.   When I removed the board, I found some problems with the transom.  Not a show stopper or a big problem.   Some fairing/sanding and maybe removal/replacement of some of the small framing will fix it nicely.  Once fixed, I can continue on with the planking and build up of the transom.

 

 

I also finally took a good look at the interior.  I held off sanding and fairing it because I knew my planking clamps were going to cause <ahem> issues, shall we say.   Now is also the time to fair it out and fix any problems.  I'm not seeing any serious problems, just a lot of sanding and fairing.  So this area, along with the transom is being attended to.  I also wanted to get this out of the way at this point as when I install the galleries, stern windows, etc. removing the sanding dust would be a real problem if I waited to sand until they were done.  Another reason is, I don't want to damage anything with the handling needed during sanding. 

 

 

I have to admit I'm pretty damn happy right now.  The problems are not as bad as I thought they'd be and overall, looking pretty good.

[Cabbie]

Hi Mark

She looks mighty fine to me,that is certainly a lot of work that you are doing.

The color and look of the hull is absolutely beautiful.

Enjoy the sanding.

Hooroo Chris

[michael mott]

Wont be long before you will want to cut her out of her cradle Mark.

 

Michael

[gjdale]

She looks lovely Mark - well done! I don't envy you the sanding job ahead, but it will be worth the effort.

[cog]

She looks great, Mark. Some (minor) fairing and sanding issues on the inside you'll always encounter ... part of the 'game' This is a very nice ending to a year's build and a good starting point for the next!!

 

Best wishes to you and the misses

 

Cheers

[captgino]

Very nice hull color! Cannot wait to see her free!

[Omega1234]

Hi Mark

 

The hull standing right side up, and looking as good as it does, has put a smile on my face. You must be one very happy chappy now, too!!!!

 

She's looking great.

 

Cheers

 

Patrick

Edited January 1, 2016 by Omega1234

[Barbossa]

Congrats Mark,

 

I can imagine how rewarding the "right side up" sight felt. 

Best wishes for 2016 : good health in the first place and much fun while accomplishing this wonderful project.

[Greg the peg leg sailor]

G'day Mark and Janet

Happy new year and don't worry about the black marks between the planks: they just like corking! Leave it that way.

Is your DEATH STAR working better now, I'm very curious!

Again havahappynuyear from down under.

Greg

Edited December 31, 2015 by Greg the peg leg sailor

[UpstateNY]

Hi Mark,

 

Congrats and I especially love the first picture. Wonderful to see her the correct way up...must be a great way to end the year after so much work.

 

I know Admiral's orders specified full planking on the outside...I am keeping my fingers crossed, those same orders allow that great interior framing work to remain visible!

 

Happy New Year!

 

Cheers,

 

Nigel.

[GLakie]

Congrats on getting her "right-side-up" Mark. Certainly a mile-stone. Very nice!   

[ChrisLBren]

Looking great Mark - congrats on a well built hull !!!

[popeye the sailor]

.......big tease!    looks sharp.........love the shots of her interior.  you should be proud of what you've accomplished.  very nicely done indeed!

 

have a happy new year Mark......and your admiral as well  

[mobbsie]

Hi Mark

 

You must be so pleased to see her from a different perspective. The colour of the hull is beautiful mate.

 

Here's hoping that both Janet and you enjoy the NY celebrations and my very best wishes to you both.

 

Be Good

 

mobbsie

[davyboy]

Hi Mark,her hull looks beautiful a fitting tribute to your dedication. Looking forward to the continuation of your build,happy sanding  

 

Kind regards and a Happy New Year,

 

Dave

[jose_b]

She really looks great. Your effort is worth.

[toms10]

A bit of an update.  First off, here's hull "right-side up".... I'm liking the way she looks.

 

 

I have to admit I'm pretty damn happy right now.  The problems are not as bad as I thought they'd be and overall, looking pretty good.

 

Things always look better right side up.    As you said, it has to feel pretty darn good to make something so nice.  You are on the verge of making it too perfect.  If you cross the line then it won't look authentic and hand made!!!    

 

Incredible job, keep it going.... it motivates us.

Tom

[BANYAN]

So what was this about blemish lines - can't see them standing up this way   Looks great Mark!

 

cheers

 

Pat

[mtaylor]

Thank you for the "likes" and comments.    Sadly, once sanding on the interior is complete, she'll back on her head for me to continue working the exterior.  I'm still a long way off from cutting her loose but I will be remove selected framing between the ship and build board when I need access.  I've done some checking and for the most part, it looks like the nubs that added to the framing before cutting are going to work out when it's time to install the deck clamps. 

 

Greg,

I've not done a full power test yet, but the DeathStar is indeed working better.  The kerf is less and the "V"ing that one sees is minimal.  I've only tested on some 3/16" cherry and boxwood but will give 1/4" a shot as soon as possible. 

 

 

I hope everyone has a wonderful new year and that the wonderful continues throughout the year.

[Piet]

"Pretty darn happy," and well you should be with such beautiful results.  Hey, we all encounter a few minor problems so why should you be different?   

Very well done mark and you and your dear bride have a great 2016 and in good health.

 

Cheers,

[Landlubber Mike]

Very nice work Mark!  Happy New Year to you and your loved ones!

[dgbot]

You have done a lovely piece of work so far Mark.  I can just imagine how the hull will look when you put a finish on it.

David B

[Mike Y]

I was really waiting for that moment! Congratulations, it looks great!

[src]

Mark, that hull looks fantastic! Clean, Fair and the finish is very nice!

A great way to start the new year.

Sam

[Moonbug]

 Echo-ing everyone else, beautiful work Mark. Nicely done!

 

- Bug